Monitor amplifiers Musical Instrument Amplifiers

sort by:
view as:      
add tax & shipping for
 
 
29%off
 
store rating:
  • product
Easy Payment Plan Available! The PM50s Personal Monitor Amp mixes a stereo line-level Monitor signal with a mic level XLR microphone signal to a set of headphones or earphones. It has a monitor level control, mic level control, mic pass through XLR...
at
 
store rating:
  • product
Mix your microphone with a main monitor mix for a perfect monitor mix that you can control. This monitor amp also works as a line tester. It has 1/4 input that accepts line and speaker levels and a mic pass-through for mixer connection.
at
46%off
 
store rating:
  • product
Easy Payment Plan Available! The Lange AMPWEDGE Amplifier and Monitor Isolation Wedge Pad was designed for musicians who desire to tilt back their amps without the bulkiness of metal amp stands. Lange AMPWEDGE Amplifier and Monitor Isolation Wedge Pad...
at
 
store rating:
  • product
The GRAMMA is an incredibly effective device thats used to float an amp or loudspeaker and yields nearly total acoustic isolation, resulting in a purity of tone that has to be heard to be believed!
at
 
store rating:
  • product
The GRAMMA is an incredibly effective device thats used to float an amp or loudspeaker and yields nearly total acoustic isolation, resulting in a purity of tone that has to be heard to be believed!
at
 
store rating:
  • product
Built on the success of GRAMMA, the Great GRAMMA is almost 30% bigger to float large speaker cabinets. Now 4x12s, 15 or 18 in. speaker cabinets will benefit from the awesome Great GRAMMA. Only Great GRAMMA can handle the big rigs!
at
 
store rating:
  $49.99

 

  • product
  • coupons
The Rolls PM50S Personal Monitor Amp is a unique device for monitoring one's self and program material at the same time. It has a monitor level control and a mic level control, mic pass through XLR jacks, 2 headphone-output jacks, and a 1/4"...
at

Free shipping no min coupon at Music123

Expiration:  12/30/09   |   Code:  FREESHIP

 
store rating:
  $49.99

 

  • product
  • coupons
The Rolls PM50S Personal Monitor Amp is a unique device for monitoring one's self and program material at the same time. It has a monitor level control and a mic level control, mic pass through XLR jacks, 2 headphone-output jacks, and a 1/4"...
at

Free shipping on $49 coupon at Musician's Friend

Expiration:  12/30/09   |   Code:  Ship49

 
store rating:
  $70.00

 

  • product
  • coupons
With the ART MyMONITOR Personal Monitor Mixer you can hear yourself while sending only the mic signal to the main mixer. Just connect MyMONITOR between the microphone and line source and the mixer. Can be AC or battery powered. Dynamic or condenser...
at

Free shipping no min coupon at Music123

Expiration:  12/30/09   |   Code:  FREESHIP

 
store rating:
  • product
The rackmount EP4000 EUROPOWER power amp from Behringer delivers up to 2 x 2,000W at 2 ohms, 2 x 1400W at 4 ohms, and 4,000W at 4 ohms in bridge mode. Its Precise Power, Signal, and Clip LEDs let you monitor performance, and its XLR and 1/4" TRS jacks...
at
14%off
 
  $55.97

 

  • product
  • coupons
Sometimes floor monitors are a problem. There isn't enough room for them onstage or someone sits in and can't hear the monitors or the drummer can't hear them well enough. Or perhaps it's a pick-up gig or a rehearsal and you didn't have enough time to set them up. In any case, sometimes it would be preferable just to put on headphones and somehow connect them to the PA. That's where a headphone tap comes in. The HeadTAP is a passive device with an input to connect the PA or monitor amplifier and an output to connect the headphones. A volume control regulates the headphone level and internal resistors keep the unit's impedance high enough to protect the headphones. It also protects the amplifier from encountering too low a load impedance while powering tap units, the speaker system or several tap units by themselves. The HeadTAP will also work with a stereo headphone amplifier for use in recording situations when you want to add headphones for additional performers. Specifications: • Input Level: Stereo/mono input selector button • Power Requirements: Passive • Output Jack: Dual 1/4" stereo/mono headphone jacks • Instrument Input: Dual parallel 1/4" stereo/mono input jacks • Dimensions: 3.75" x 2.875" x 1.5" (95 x 74 x 40 mm).

Free Shipping on all orders - No Minimum Purchase required.

 
  $55.00

 

  • product
  • coupons
Sometimes floor monitors are a problem. There isn't enough room for them onstage or someone sits in and can't hear the monitors or the drummer can't hear them well enough. Or perhaps it's a pick-up gig or a rehearsal and you didn't have enough time to set them up. In any case, sometimes it would be preferable just to put on headphones and somehow connect them to the PA. That's where a headphone tap comes in. The HeadTAP is a passive device with an input to connect the PA or monitor amplifier and an output to connect the headphones. A volume control regulates the headphone level and internal resistors keep the unit's impedance high enough to protect the headphones. It also protects the amplifier from encountering too low a load impedance while powering tap units, the speaker system or several tap units by themselves. The HeadTAP will also work with a stereo headphone amplifier for use in recording situations when you want to add headphones for additional performers. Specifications: • Input Level: Stereo/mono input selector button • Power Requirements: Passive • Output Jack: Dual 1/4" stereo/mono headphone jacks • Instrument Input: Dual parallel 1/4" stereo/mono input jacks • Dimensions: 3.75" x 2.875" x 1.5" (95 x 74 x 40 mm).
at

Free shipping on $49 coupon at Musician's Friend

Expiration:  12/30/09   |   Code:  Ship49

 
  • product
Sometimes floor monitors are a problem. There isn't enough room for them onstage or someone sits in and can't hear the monitors or the drummer can't hear them well enough. Or perhaps it's a pick-up gig or a rehearsal and you didn't have enough time to set them up. In any case, sometimes it would be preferable just to put on headphones and somehow connect them to the PA. That's where a headphone tap comes in. The HeadTAP is a passive device with an input to connect the PA or monitor amplifier and an output to connect the headphones. A volume control regulates the headphone level and internal resistors keep the unit's impedance high enough to protect the headphones. It also protects the amplifier from encountering too low a load impedance while powering tap units, the speaker system or several tap units by themselves. The HeadTAP will also work with a stereo headphone amplifier for use in recording situations when you want to add headphones for additional performers. Specifications: • Input Level: Stereo/mono input selector button • Power Requirements: Passive • Output Jack: Dual 1/4" stereo/mono headphone jacks • Instrument Input: Dual parallel 1/4" stereo/mono input jacks • Dimensions: 3.75" x 2.875" x 1.5" (95 x 74 x 40 mm).
at
 
store rating:
  • product
The rackmountable EP2000 EUROPOWER power amp from Behringer delivers up to 2 x 1,000 watts at 2 ohms, 2 x 750W at 4 ohms, and 2,000W at 4 ohms in bridge mode. Its Precise Power, Signal, and Clip LEDs let you monitor performance, and its XLR and 1/4"...
at
 
store rating:
  • product
The rackmountable EP2000 EUROPOWER power amp from Behringer delivers up to 2 x 1,000 watts at 2 ohms, 2 x 750W at 4 ohms, and 2,000W at 4 ohms in bridge mode. Its Precise Power, Signal, and Clip LEDs let you monitor performance, and its XLR and 1/4"...
at
 
store rating:
  • product
The rackmount EP4000 EUROPOWER power amp from Behringer delivers up to 2 x 2,000W at 2 ohms, 2 x 1400W at 4 ohms, and 4,000W at 4 ohms in bridge mode. Its Precise Power, Signal, and Clip LEDs let you monitor performance, and its XLR and 1/4" TRS jacks...
at
 
  • product
This portable amplifier is designed for Roland's V-Drums kits and features a 10" coaxial, 2-way speaker and a mix input for incorporating other audio sources.
 
store rating:
  • product
2010's hottest product from Acesonic, the world's first karaoke mixing amplifier with a built-in 3.5" LCD display and MP3+G playback and recorder. The Acesonic Professional Rack-mountable KJV-835 400-Watt Mixing Amplifier is designed with KJs and...
at
22%off
 
  $299.97

 

  • product
  • coupons
30W Personal Monitor Amp with 10" Two-Way Coaxial speaker

Free Shipping on all orders - No Minimum Purchase required.

 
  • product
The A500 is a professional 500-Watt Reference-Class Studio Power Amplifier with noise-free operation that the servo-controlled design can drive virtually all passive speakers. This ultra-linear power amplifier is the top choice for recording studios and post production work.
at
You'll find the best prices on Monitor amplifiers in Musical Instrument Amplifiers when you shop online at bizrate. Do all your comparison shopping for Behringer, Auralex and Samson Musical Instrument Amplifiers in one place. Compare models and see which online Musical Instruments & Accessory stores have the best merchant ratings. Make an informed decision on Monitor amplifiers Musical Instrument Amplifiers before you buy. bizrate will help you with all of your holiday gift shopping needs. Buy Rolls PM50S Personal Monitor Amplifier System or Rolls PM50s Personal Monitor Amplifier System.