Home > Musical Instruments & Accessories > Musical Instrument Microphones > amt electronics instrument clip on microphone

Amt electronics instrument clip on microphone Musical Instrument Microphones

you're in Musical Instrument Microphones, see other matches in:

sort by:
view as:      
add tax & shipping for
 
 
Applied Microphone Technology AMT Z1 Studio Clip On Condenser Microphone System
 

Applied Microphone Technology AMT Z1 Stu...

store rating:
$572.88

 

  • product
Applied Microphone Technology AMT Z1 Studio Clip On Condenser Microphone System
The AMT Z1 Studio version combines the smallest and only specific flute microphone system on the market with the AMT AP40 floor preamp. The AP40 converts the microphones to low impedance. It regulates the voltage to each microphone, and with certain...
$572.88
at  
Applied Microphone Technology AMT Z1 Studio Clip On Condenser Microphone System
 

Applied Microphone Technology AMT Z1 Stu...

store rating:
$651.00

 

  • product
Applied Microphone Technology AMT Z1 Studio Clip On Condenser Microphone System
The AMT Z1 Studio version combines the smallest and only specific flute microphone system on the market with the AMT AP40 floor preamp. The AP40 converts the microphones to low impedance. It regulates the voltage to each microphone, and with certain...
$651.00
at  
Applied Microphone Technology AMT Z1 Studio Clip On Condenser Microphone System
 

Applied Microphone Technology AMT Z1 Stu...

store rating:
$651.00

 

  • product
Applied Microphone Technology AMT Z1 Studio Clip On Condenser Microphone System
The AMT Z1 Studio version combines the smallest and only specific flute microphone system on the market with the AMT AP40 floor preamp. The AP40 converts the microphones to low impedance. It regulates the voltage to each microphone, and with certain...
$651.00
at  
Applied Microphone Technology AMT VS Studio Clip-On Condenser Microphone System
 

Applied Microphone Technology AMT VS Stu...

store rating:
$663.00

 

  • product
Applied Microphone Technology AMT VS Studio Clip-On Condenser Microphone System
The AMT VS Studio version combines the natural AMT VS Studio Clip-On microphone system with the AMT AP40 floor pre-amp. The AP40 converts the microphones to low impedance, it regulates the voltage to each microphone, and with certain models creates a...
$663.00
at  
Applied Microphone Technology AMT S15G Low Profile Clip On Condenser Microphone
 

Applied Microphone Technology AMT S15G L...

store rating:
see other stores that carry it
$572.00

 

  • product
Applied Microphone Technology AMT S15G Low Profile Clip On Condenser Microphone
The S15G is a low-profile condenser microphone that has a cardioid pattern which gives it better gain before feedback than most guitar microphones on the market. The element as well as the mounting clamp is designed for the instrument. AMT designs microphones for each instrument and does NOT adapt elements or mounting gear to fit instruments. The S15G system clamps to the outside of the guitar. It is adjustable from a minimum of 3" to a maximum of 5-7/8". The AMT S15G features a flexible 6" gooseneck, allowing the player to position the microphone for the best possible tone reproduction. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.The microphone attaches to the side of the guitar or other musical instrument, and is suspended in a 4 point isolation ring reducing handling noise. The S15G terminates to the BP42 belt pack. It operates on either 9 volt battery or Phantom power to 48 volts DC. It
$572.00
at  
Applied Microphone Technology AMT HR2 Clip On Harmonica Condenser Microphone
 

Applied Microphone Technology AMT HR2 Cl...

store rating:
see other stores that carry it
$180.00

 

  • product
Applied Microphone Technology AMT HR2 Clip On Harmonica Condenser Microphone
The AMT HR-2 mic is a clip-on version of the AMT HR1 hand held microphone system for harmonica. The system is low in profile, which allows it to be used with a standard neck harness. The microphone comes with clips to attach to the harmonica. The AMT HR2 is the only microphone on the market that can be used in combination with a harmonica neck brace.The AMT HR2 can be used with most major brand wireless belt pack transmitters and receivers. With the AMT Interface, the microphone can plug directly into the interface which then plugs directly into most major brand wireless units. When ordering the AMT Interface, be sure to know your wireless make, model, and pin out configuration. Interfaces are made to order.Allows use with 9V battery or phantom power battery preferred.
$180.00
at  
Applied Microphone Technology AMT System 1 Low Profile Clip On Cond Mic Sys (Standard)
 

Applied Microphone Technology AMT System...

store rating:
see other stores that carry it
$343.00

 

  • product
Applied Microphone Technology AMT System 1 Low Profile Clip On Cond Mic Sys (Standard)
The AMT System 1 is a low profile condenser microphone that attaches to the bell of any flanged bell instrument such as horns, woodwind and brass, with a low mass clip. It can also clamp to many other musical instruments using the AMT "Universal Clamp". The microphone provides pure tonal reproduction while being unobtrusive. The System 1 microphone element is designed to be used with 40 or more instruments. It's response is designed to complement everything from brass and woodwinds to percussion. See the list below of all possible instruments to use it on.With the included clip portion of the "Universal Clamp", the System 1 microphone can be used on soprano, alto, tenor and bari sax, as well as trumpet, trombone, baritone horn, flugelhorn and tuba. The clip portion of the "Universal Clamp" is used for flanged bell instruments such as brass and woodwinds. It is a spring loaded design with a set screw that can reinforce stability on the horn if the playe
$343.00
at  
Applied Microphone Technology AMT VS Studio Low Profile Clip On Cond Mic Sys
 

Applied Microphone Technology AMT VS Stu...

store rating:
$663.00

 

  • product
Applied Microphone Technology AMT VS Studio Low Profile Clip On Cond Mic Sys
The AMT VS Studio version combines the natural AMT VS Studio Clip-On microphone system with the AMT AP40 floor pre-amp. The AP40 converts the microphones to low impedance, it regulates the voltage to each microphone, and with certain models creates a...
$663.00
at  
Applied Microphone Technology AMT HR2 Clip On Harmonica Condenser Microphone
 

Applied Microphone Technology AMT HR2 Cl...

store rating:
see other stores that carry it
$180.00

 

  • product
Applied Microphone Technology AMT HR2 Clip On Harmonica Condenser Microphone
The AMT HR-2 mic is a clip-on version of the AMT HR1 hand held microphone system for harmonica. The system is low in profile, which allows it to be used with a standard neck harness. The microphone comes with clips to attach to the harmonica. The AMT HR2 is the only microphone on the market that can be used in combination with a harmonica neck brace.The AMT HR2 can be used with most major brand wireless belt pack transmitters and receivers. With the AMT Interface, the microphone can plug directly into the interface which then plugs directly into most major brand wireless units. When ordering the AMT Interface, be sure to know your wireless make, model, and pin out configuration. Interfaces are made to order.Allows use with 9V battery or phantom power battery preferred.
$180.00
at  
Applied Microphone Technology AMT HR2 Clip On Harmonica Microphone
 

Applied Microphone Technology AMT HR2 Cl...

store rating:
see other stores that carry it
$180.00

 

  • product
Applied Microphone Technology AMT HR2 Clip On Harmonica Microphone
The AMT HR-2 mic is a clip-on version of the AMT HR1 hand held microphone system for harmonica. The system is low in profile, which allows it to be used with a standard neck harness. The microphone comes with clips to attach to the harmonica. The AMT HR2 is the only microphone on the market that can be used in combination with a harmonica neck brace.The AMT HR2 can be used with most major brand wireless belt pack transmitters and receivers. With the AMT Interface, the microphone can plug directly into the interface which then plugs directly into most major brand wireless units. When ordering the AMT Interface, be sure to know your wireless make, model, and pin out configuration. Interfaces are made to order.Allows use with 9V battery or phantom power battery preferred.
$180.00
at  
Applied Microphone Technology AMT S15G Low Profile Clip On Condenser Microphone
 

Applied Microphone Technology AMT S15G L...

store rating:
see other stores that carry it
$572.00

 

  • product
Applied Microphone Technology AMT S15G Low Profile Clip On Condenser Microphone
The S15G is a low-profile condenser microphone that has a cardioid pattern which gives it better gain before feedback than most guitar microphones on the market. The element as well as the mounting clamp is designed for the instrument. AMT designs microphones for each instrument and does NOT adapt elements or mounting gear to fit instruments. The S15G system clamps to the outside of the guitar. It is adjustable from a minimum of 3" to a maximum of 5-7/8". The AMT S15G features a flexible 6" gooseneck, allowing the player to position the microphone for the best possible tone reproduction. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.The microphone attaches to the side of the guitar or other musical instrument, and is suspended in a 4 point isolation ring reducing handling noise. The S15G terminates to the BP42 belt pack. It operates on either 9 volt battery or Phantom power to 48 volts DC. It
$572.00
at  
Applied Microphone Technology AMT S15G Low Profile Clip On Condenser Microphone
 

Applied Microphone Technology AMT S15G L...

store rating:
see other stores that carry it
$572.00

 

  • product
Applied Microphone Technology AMT S15G Low Profile Clip On Condenser Microphone
The S15G is a low-profile condenser microphone that has a cardioid pattern which gives it better gain before feedback than most guitar microphones on the market. The element as well as the mounting clamp is designed for the instrument. AMT designs microphones for each instrument and does NOT adapt elements or mounting gear to fit instruments. The S15G system clamps to the outside of the guitar. It is adjustable from a minimum of 3" to a maximum of 5-7/8". The AMT S15G features a flexible 6" gooseneck, allowing the player to position the microphone for the best possible tone reproduction. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.The microphone attaches to the side of the guitar or other musical instrument, and is suspended in a 4 point isolation ring reducing handling noise. The S15G terminates to the BP42 belt pack. It operates on either 9 volt battery or Phantom power to 48 volts DC. It
$572.00
at  
Applied Microphone Technology AMT TA2 Studio Clip On Double Cond Mic Sys
 

Applied Microphone Technology AMT TA2 St...

store rating:
see other stores that carry it
$693.00

 

  • product
Applied Microphone Technology AMT TA2 Studio Clip On Double Cond Mic Sys
The AMT TA2 Studio Clip-On Double Microphone System includes two AMT TA2 low profile condenser microphones and the AMT AP40 Preamp. The AMT TA2 is a low profile double condenser microphone that attaches to the bell with a low mass clip specifically designed soprano or baritone saxophone. The TA2 microphone provides pure tonal reproduction while being unobtrusive. It's an excellent choice for a principal artist or soloist.The microphone attaches to the bell of instrument, the top or over the keys microphone is suspended in a 4 point isolation ring reducing valve, key, click, and handling noise. The second microphone is placed in front of the bell of the microphone. Both microphones are on goosenecks for optimal placement. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.The AP40 Preamp converts all of the microphones to low impedance, it regulates the voltage to each microphone, and with certain models creates a specific frequency curve. The curve is necessary on certain models or musical instruments in order to maintain the most natural reproduction of sound in conjunction with achieving the most amount of gain before feedback in a live application. There is a L / G switch on the preamp. This is a Ground Lift switch. If phantom power is not regulated for the correct voltage OR if phantom is reduced by the addition / amount of other condenser microphone connected, the swit...
$693.00
at  
Applied Microphone Technology AMT System 1 Low Profile Clip On Cond Mic Sys
 

Applied Microphone Technology AMT System...

store rating:
see other stores that carry it
$343.00

 

  • product
Applied Microphone Technology AMT System 1 Low Profile Clip On Cond Mic Sys
The AMT System 1 is a low profile condenser microphone that attaches to the bell of any flanged bell instrument such as horns, woodwind and brass, with a low mass clip. It can also clamp to many other musical instruments using the AMT "Universal Clamp". The microphone provides pure tonal reproduction while being unobtrusive. The System 1 microphone element is designed to be used with 40 or more instruments. It's response is designed to complement everything from brass and woodwinds to percussion. See the list below of all possible instruments to use it on.With the included clip portion of the "Universal Clamp", the System 1 microphone can be used on soprano, alto, tenor and bari sax, as well as trumpet, trombone, baritone horn, flugelhorn and tuba. The clip portion of the "Universal Clamp" is used for flanged bell instruments such as brass and woodwinds. It is a spring loaded design with a set screw that can reinforce stability on the horn if the playe
$343.00
at  
Applied Microphone Technology AMT TA2 Studio Clip On Double Cond Mic Sys
 

Applied Microphone Technology AMT TA2 St...

store rating:
see other stores that carry it
$693.00

 

  • product
Applied Microphone Technology AMT TA2 Studio Clip On Double Cond Mic Sys
The AMT TA2 Studio Clip-On Double Microphone System includes two AMT TA2 low profile condenser microphones and the AMT AP40 Preamp. The AMT TA2 is a low profile double condenser microphone that attaches to the bell with a low mass clip specifically designed soprano or baritone saxophone. The TA2 microphone provides pure tonal reproduction while being unobtrusive. It's an excellent choice for a principal artist or soloist.The microphone attaches to the bell of instrument, the top or over the keys microphone is suspended in a 4 point isolation ring reducing valve, key, click, and handling noise. The second microphone is placed in front of the bell of the microphone. Both microphones are on goosenecks for optimal placement. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.The AP40 Preamp converts all of the microphones to low impedance, it regulates the voltage to each microphone, and with certain models creates a specific frequency curve. The curve is necessary on certain models or musical instruments in order to maintain the most natural reproduction of sound in conjunction with achieving the most amount of gain before feedback in a live application. There is a L / G switch on the preamp. This is a Ground Lift switch. If phantom power is not regulated for the correct voltage OR if phantom is reduced by the addition / amount of other condenser microphone connected, the swit...
$693.00
at  
Applied Microphone Technology AMT TA2 Studio Clip-On Double Microphone System
 

Applied Microphone Technology AMT TA2 St...

store rating:
see other stores that carry it
$693.00

 

  • product
Applied Microphone Technology AMT TA2 Studio Clip-On Double Microphone System
The AMT TA2 Studio Clip-On Double Microphone System includes two AMT TA2 low profile condenser microphones and the AMT AP40 Preamp. The AMT TA2 is a low profile double condenser microphone that attaches to the bell with a low mass clip specifically designed soprano or baritone saxophone. The TA2 microphone provides pure tonal reproduction while being unobtrusive. It's an excellent choice for a principal artist or soloist.The microphone attaches to the bell of instrument, the top or over the keys microphone is suspended in a 4 point isolation ring reducing valve, key, click, and handling noise. The second microphone is placed in front of the bell of the microphone. Both microphones are on goosenecks for optimal placement. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.The AP40 Preamp converts all of the microphones to low impedance, it regulates the voltage to each microphone, and with certain models creates a specific frequency curve. The curve is necessary on certain models or musical instruments in order to maintain the most natural reproduction of sound in conjunction with achieving the most amount of gain before feedback in a live application. There is a L / G switch on the preamp. This is a Ground Lift switch. If phantom power is not regulated for the correct voltage OR if phantom is reduced by the addition / amount of other condenser microphone connected, the swit...
$693.00
at  
Applied Microphone Technology AMT System 1 Clip-On Condenser Microphone System
 

Applied Microphone Technology AMT System...

store rating:
see other stores that carry it
$343.00

 

  • product
Applied Microphone Technology AMT System 1 Clip-On Condenser Microphone System
The AMT System 1 is a low profile condenser microphone that attaches to the bell of any flanged bell instrument such as horns, woodwind and brass, with a low mass clip. It can also clamp to many other musical instruments using the AMT "Universal Clamp". The microphone provides pure tonal reproduction while being unobtrusive. The System 1 microphone element is designed to be used with 40 or more instruments. It's response is designed to complement everything from brass and woodwinds to percussion. See the list below of all possible instruments to use it on.With the included clip portion of the "Universal Clamp", the System 1 microphone can be used on soprano, alto, tenor and bari sax, as well as trumpet, trombone, baritone horn, flugelhorn and tuba. The clip portion of the "Universal Clamp" is used for flanged bell instruments such as brass and woodwinds. It is a spring loaded design with a set screw that can reinforce stability on the horn if the playe
$343.00
at  
 
You'll find the best prices on Amt electronics instrument clip on microphone in Musical Instrument Microphones when you shop online at bizrate. Do all your comparison shopping for AMT Electronics Musical Instrument Microphones in one place. Compare models and see which online Musical Instruments & Accessory stores have the best merchant ratings. Make an informed decision on Amt electronics instrument clip on microphone Musical Instrument Microphones before you buy. bizrate will help you with all of your holiday gift shopping needs. Buy Applied Microphone Technology AMT System 1 Clip-On Condenser Microphone System or Applied Microphone Technology AMT HR2 Clip On Harmonica Microphone.