Audio technica microphone Musical Instrument Microphones

Description:

The new AT2020 USB offers studio-quality articulation and intelligibility. It plugs right into your computers USB port, and functions seamlessly with your favorite recording software. Equipped with a USB digital output, the AT2020USB is perfect for...

Description:

AV-JEFE AVL630-H4P Professional Unidirectional Earhook Headset Microphone with Hiroshi 4 Pin Connector for Audio Technica (Body Pack not including). Designed for Use on Stage, Houses of Worship, Lecturers and Other Applications Requiring Minimum...

Description:

Audio-Technicas PRO92CW wireless omnidirectional condenser headworn microphone offers a natural, smooth frequency response optimized for vocal articulation. The mic features a small condenser capsule; a lightweight, contoured earpiece; and a flexible...

Description:

Easy Payment Plan Available! Audio Technica BP4025 Stereo Condenser Microphone; Designed for broadcast and Pro recording! A Large diaphragm stereo condenser, Audio-Technica’s BP4025 contains what can only be referred to as an innovative coincident...

Description:

The Audio-Technica ATW-251 Freeway VHF Headworn Wireless System is designed to provide reliable performance, easy setup and clear, natural sound quality. The Freeway Wireless Microphone System includes the ATW-R250 receiver, the ATW-T201 body-pack transmitter, and the PRO 8HEcW hands free microphone. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element.ATW-R250 receiver The ATW-R250 receiver includes a space-saving switching power supply that automatically adapts to changes in mains voltage. Unlike bulky linear power supplies, this switching power supply is lightweight and compact; it uses only a single outlet space. ATW-T201 UniPak body-pack transmitter The versatile ATW-T201 UniPak body-pack transmitter has both a high-impedance input for instruments, and a low-impedance input with bias connection for use with dynamic and electret condenser microphones. The ATW-T201 uses internal 9-volt batteries and has an Off/Standby/On switch, input Trim (level) adjustment, and battery-save switch. PRO 8HEcW headworn microphone Offering highly intelligible individual voice reproduction, the comfortable, lightweight PRO 8HEcW headworn microphone is ideal for guitarists, keyboard players, drummers and others who need the use of their hands during performance. Its low-visibility headband and cushioned support pads provide a stable, comfortable fit. Designed for professional quality v...

Description:

Get two Audio-Technica M4000S hand-held dynamic microphones for the price of one! These microphones have professional features for a ridiculously affordable price. Their frequency responses are tailored for crystal-clear vocal reproduction. Great...

Description:

Supplied with Audio-Technica's versatile UniMount clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear,...

Description:

The Audio-Technica 815ST is a stereo shotgun microphone designed for broadcasters, videographers and sound recordists. Its compact, lightweight design is perfect for camera-mount use. Independent line-cardioid and figure-eight condenser elements....

Description:

Description:

Offering highly intelligible individual voice reproduction, the comfortable, lightweight PRO 8HEx is ideal for guitarists, keyboard players, drummers and others who need the use of their hands during performance. Its low-visibility headband and...

Description:

The PRO24CM camcorder microphone is a lightweight, compact stereo condenser ideal for digital recording with high-fidelity stereo sound. Equipped with an accessory shoe and permanently attached coiled cable, the microphone features a pair of cardioid...

Description:

AT-831 Mic with P6 Connector Audio Technica AT831Uni-Directional Lavelier with P6 connector, for Samson transmitters used with SuperTD, Broadcast, MR1, UHF 4, Synth 5, and Synth 6 systems

Description:

SWA3L8 - AT-831 Microphone w/ P3 Connector Audio Technica Lavelier with P3 connector, for use with Samson transmitters used with UM1 and VM1 micro systems, VLX, VLXTD, Synth 32, Micro 32, VHF, VHFTD, Series One, Concert II, Concert III, Concert IV,...

Description:

The Audio-Technica ATW-251 Freeway VHF Headworn Wireless System is designed to provide reliable performance, easy setup and clear, natural sound quality. The Freeway Wireless Microphone System includes the ATW-R250 receiver, the ATW-T201 body-pack transmitter, and the PRO 8HEcW hands free microphone. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element.ATW-R250 receiver The ATW-R250 receiver includes a space-saving switching power supply that automatically adapts to changes in mains voltage. Unlike bulky linear power supplies, this switching power supply is lightweight and compact; it uses only a single outlet space. ATW-T201 UniPak body-pack transmitter The versatile ATW-T201 UniPak body-pack transmitter has both a high-impedance input for instruments, and a low-impedance input with bias connection for use with dynamic and electret condenser microphones. The ATW-T201 uses internal 9-volt batteries and has an Off/Standby/On switch, input Trim (level) adjustment, and battery-save switch. PRO 8HEcW headworn microphone Offering highly intelligible individual voice reproduction, the comfortable, lightweight PRO 8HEcW headworn microphone is ideal for guitarists, keyboard players, drummers and others who need the use of their hands during performance. Its low-visibility headband and cushioned support pads provide a stable, comfortable fit. Designed for professional quality v...

Description:

The Audio-Technica M4000S Handheld dynamic microphone has professional features with a ridiculously affordable price tag! Its frequency response is tailored for crystal-clear vocal reproduction. Great feedback rejection and focused pick up are due to the unidirectional polar pattern. It also features a handy on/off switch for ease of use. Professional features include a balanced XLR output and a rugged stand clamp. Whether you're on the road, in the studio, or just performing at local gigs, its all-metal design helps provide years of trouble free use.

Description:

The Audio-Technica ATW-RMS2 is a streamlined, lightweight switch that mutes your Audio-Technica wireless microphones quickly and easily.The ATW-RMS2 features a push-button switch that provides audio muting with no annoying clicks or pops. The switch...

Description:

That's right, get two great Audio-Technica M8000 dynamic microphones for the price of one! The M8000 from Audio-Technica is a dynamic mic with a hypercardioid polar pattern and frequency response of 50Hz?14kHz. Lightweight and comfortable to hold, the...

Description:

Introducing a giant stride in the technology of inconspicuous sound. With a capsule diameter of just 2.5 mm, the new MicroSet provides the ultimate in low-profile, high-performance audio. This innovative omni-directional condenser headworn mic offers an ergonomic under-ear design: its flexible, lightweight contoured loop hooks behind either ear for an ultra-secure, comfortable fit with or without glasses. Terminated for Shure wireless systems. 55" (1.4 m) cable. Includes element covers, windscreens and cable clip.

Description:

The Audio Technica ATW-251 Freeway VHF Guitar Wireless System is designed to provide reliable performance, easy setup and clear, natural sound quality. The Freeway Wireless Microphone System includes the ATW-R250 receiver and the ATW-T201 body-pack transmitter on a specific crystal-controlled frequency. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element. Guitar cable connects between you guitar and the pocket transmitter for a flawless, direct connection for performance or recording. Signal-to-Noise Ratio - 80 dB at 10 kHz deviation (A-weighted), maximum modulation 15 kHz Total Harmonic Distortion - <1% (+-10 kHz deviation at 1 kHz) Audio Output (balanced) - 350 mV (at 1 kHz, +-10 kHz deviation, 100 K ohm load) Output Connector - 1/4 TS (mono) phone jack Power Supply - 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply Dimensions (W x H x D) - 7.48 x 1.65 x 5.12 The versatile ATW-T201 UniPak body-pack transmitter has both a high-impedance input for instruments, and a low-impedance input with bias connection for use with dynamic and electret condenser microphones. The ATW-T201 uses internal 9-volt batteries and has an Off/Standby/On switch, input Trim (level) adjustment, and battery-save switch. Battery (not included) - 9V (NEDA type 1604) alkaline, not included Current Consumption - 30 mA typical Battery Life - Approximately 15 hours in high position; approximately 8 hours in low position, (depending on battery type and use pattern) Dimensions (W x H x D) - 2.56 x 4.33 x 1.00; about 3 ounces

Description:

"receiver and ATW-T220 handheld cardioid dynamic microphone/transmitter Automatic frequency scanning finds an open channel at the touch of a button All 10 user-switchable channels are compatible Automatic frequency scanning finds an open channel at the touch of a button metal half-rack receiver XLR and unbalanced 1/4 output jacks "

Description:

Audio-Technica's PRO 88W VHF wireless microphone system is designed for camcorder and other applications requiring a small, easily portable wireless. Equipped with a flexible detachable antenna and a choice of two transmitter and receiver frequencies on each system, the small and inconspicuous VHF wireless system will mount on the light shoe of camcorders or on the back of a camera itself with a Velcro attachment. For fixed installations, a 9V DC input is available on the receiver. Eight VHF channels are available for interference-free operation in virtually any location. Audio-Technica's omnidirectional ATR35 lavalier-type clip-on microphone is engineered for intelligible, accurate voice reproduction. This high-quality condenser is ideal for video use. Its low-profile design assures minimum visibility. It clips on to clothes and has a transmitter that clips to a belt. Durable, flexible antenna can be positioned for best reception Real-time monitoring capability with included earphone Rugged design and construction with handsome non-reflective finish Quick and reliable mounting system for camcorder use Receiver and transmitter are each powered by a single 9V battery

Description:

The new AT2010 is designed to bring the studio-quality articulation and intelligibility of Audio-Technicas renowned 20 Series to the stage, for crystal-clear vocal performances. Featuring the same 16 mm low-mass diaphragm found in the critically acclaimed AT2020 side-address studio condenser, the AT2010 excels wherever articulate vocals are needed: in houses of worship, for solo performances, jazz vocalists, singer/songwriters, and more.

Description:

The AT2020 USB offers studio-quality articulation and intelligibility. It plugs right into your computer's USB port, and functions seamlessly with your favorite recording software. Equipped with a USB digital output, the AT2020USB is perfect for home studio recording, field recording, podcasting, and voiceover use. The AT2020 USB is based on the design of Audio-Technica's critically acclaimed AT2020 cardioid condenser microphone. Like the AT2020, it features a low-mass diaphragm, custom-engineered for extended frequency response and superior transient response. With low self-noise, the AT2020USB is perfectly suited for sophisticated digital recording equipment. Audio-Technica's state-of-the-art design and manufacturing techniques ensure that the microphone complies with the company's renowned consistency and reliability standards. Low self-noise - perfectly suited for sophisticated digital recording equipment

Description:

receiver and ATW-T701 UniPak transmitter with lavalier microphone feature eight selectable frequency-coordinated channels diversity operation automatic frequency scanning Tone Lock squelch and more. Diversity frequency agility UHF.

Description:

The Audio-Technica ATW-702 system delivers professional sound quality and the freedom of wireless.

Description:

The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more.

Description:

Audio-Technica Artist Series ATM250 Dynamic Kick Drum Microphone

Description:

Audio-Technica's AT897 is designed for field audio acquisition in film/TV/video production, professional recording, wildlife recording and broadcast applications. It mounts conveniently on a DV camcorder without adding noticeable heft, and remains out of the frame even with compact digital cameras. This high-performance short shotgun offers outstanding long-distance audio pickup due to narrow acceptance angle of line + gradient design. It also features smooth, natural-sounding on-axis audio quality and excellent off-axis rejection of sound arriving from the sides and rear of mic.

Description:

The Audio-Technica M4000S Handheld dynamic microphone has professional features with a ridiculously affordable price tag. Its frequency response is tailored for crystal-clear vocal reproduction. Great feedback rejection and focused pick up are due to...

Description:

Audio-Technica brings you the price/performance standard in side-address studio condenser microphone technology with the AT-2020. Ideal for project/home-studio applications, this mic features high SPL handling and wide dynamic range which provides unmatched versatility. Custom-engineered low-mass diaphragm provides extended frequency response and superior transient response. Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source. Pivoting, threaded stand mount attaches securely for easy and precise placement of the microphone. Specifications: Element: Condenser Signal to Noise Rati 74 dB, 1 kHz at 1 Pa Polar Pattern: Cardioid Dynamic Range (Typical) 124 dB, 1 kHz at Max. SPL Frequency Response: 20 - 20,000 Hz Phantom Power Requirements: 48V DC, 2 mA typical Open Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa Noise: 20 dB SPL Impedance: 100 ohms Weight: 12.1 oz (345 g) Maximum Input Sound Level: 144 dB SPL, 1 kHz at 1% T.H.D. Output Connector: Integral 3-pin XLRM-type