Clip on microphone Musical Instrument Microphones

Description:

The Nady CM-60 is a clip-on condenser microphone that is ideal for close-up miking of all types of drums and percussion instruments. Also great for accurate sonic reproduction of brass, string, woodwind, guitars, and other acoustic instruments that...

Description:

Oklahoma Sound tieclip wireless microphone and receiver lets you comfortably leave the podium up to 200' to interact with and get reaction from your audience or to address graphics. 170180 MHz for excellent sound. Clipon lavaliere style microphone...

Description:

The Nady CM-60 is a clip-on condenser microphone that is ideal for close-up miking of all types of drums and percussion instruments. Also great for accurate sonic reproduction of brass, string, woodwind, guitars, and other acoustic instruments that...

Description:

The Nady CM-60 is a clip-on condenser microphone that is ideal for close-up miking of all types of drums and percussion instruments. Also great for accurate sonic reproduction of brass, string, woodwind, guitars, and other acoustic instruments that...

Description:

The Audix ADX-90 Clip-on Condenser Mic is lightweight, compact, and extremely easy to use. It will give you smooth, uniform response over a frequency range of 50Hz-18kHz. Designed with an integral clamping system, it's perfect for drums, percussion...

Description:

TIE-CLIP LAVALIER WIRELESS MIC SYSTEMIncludes pocket size transmitter and receiver with a clip-on mic. Usestwo 9 volt batteries (not included). Includes belt clip and necessarycables. Select channel A or B to eliminate outside frequency interruption.Move

Description:

V-Tech VT-1040 MicrophoneImpressive sound and quality at a very low price. Ball style mic with on/off switch, dual independence (Hi-Z or Lo-Z),mic clip included.

Description:

The AMT Z1 Studio version combines the smallest and only specific flute microphone system on the market with the AMT AP40 floor preamp. The AP40 converts the microphones to low impedance. It regulates the voltage to each microphone, and with certain...

Description:

Easy Payment Plan Available! Samson Go Mic Compact USB Microphone is a versatile computer-based miking and recording solution. Due to its custom compact design, the Go Mic is able to clip directly onto your laptop or sit unobtrusively on your desk....

Description:

Samson Go Mic Compact USB Microphone is a versatile computer-based miking and recording solution. Due to its custom compact design, the Go Mic is able to clip directly onto your laptop or sit unobtrusively on your desk. Plug and play operation also...

Description:

Samson Go Mic Compact USB Microphone is a versatile computer-based miking and recording solution. Due to its custom compact design, the Go Mic is able to clip directly onto your laptop or sit unobtrusively on your desk. Plug and play operation also...

Description:

Samson R31S Hypercadioid Dynamic Microphone Features Hypercardioid pickup pattern On/Off switch XLR to 1/4"" mic cable Mic clip included

Description:

Easy Payment Plan Available! Samson Go Mic Compact USB Microphone is a versatile computer-based miking and recording solution. Due to its custom compact design, the Go Mic is able to clip directly onto your laptop or sit unobtrusively on your desk....

Description:

The Musicians Gear Microphone Pro-Pal includes a Musicians Gear dynamic cardioid stage mic with on/off switch, tripod mic stand with mic clip and boom extension, and pro low-noise mic cable with XLR connectors.

Description:

The MICRO-D is a pre-polarized condenser microphone designed for many applications including drums, percussion, amplified cabinets, speech, vocals and acoustic instruments. Used in conjunction with 3 different types of specialized clips and 2 different types of interchangeable capsules the MICRO-D becomes a modular sytem that can fulfill a wide variety of creative needs. With a smooth uniform response over a frequency range of 40 Hz ?20 kHz, the MICRO-D is lightweight, compact, and extremely easy to use. Housed in an aluminum ring and isolated by means of a rubber shock mount system, the Micro-D has a hypercardioid pick-up pattern and is capable of handling sound pressure levels up to 140 dB. The MICRO-D operates on phantom power of 9?52 Volts and is supplied with a phantom power adapter, integral Dvice clamp, cable, windscreen, and carrying pouch. Low noise electronic circuitry and balanced low impedance output allow for interference free performance even with long cable runs. FEATURES Lightweight, compact, low profile Simple to set-up and use Can be used to mic multiple drums at one time Fits into tight spaces (between drums, beneath cymbals) APPLICATIONS (Live or Studio) Drums and percussion Orchestral zone miking Vocal zone miking Guitar and Bass cabinets Cymbals Saxophone, Brass Acoustic instruments SPECIFICATIONS Transducer Type: Condenser (pre-polarized) Frequency Response: 40 Hz - 20 kHz Polar Pattern: Hypercardioid Outp...

Description:

[FREE SHIPPING!] Samson Go Mic - USB Microphone for Mac and PC Computers (Silver) Go Mic - USB Microphone for Mac and PC Computers (Silver), USB Output, Requires No Drivers, 1/8" (3.5mm) Headphone Output, 44.1kHz / 16-Bit Resolution, Clip-on or Desktop...

Description:

The Shure Beta 98HC is a premium cardioid condenser instrumental microphone that clamps onto the bell of several different wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured in place, and an isolation shock-mount reduces the transmission of instrument ?key noise? and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances. The Beta 98HC features transformerless preamplifier circuitry, which improves linearity across the full frequency range. The pickup pattern of the Beta 98H/C provides high gain-before-feedback and excellent rejection of unwanted noise. Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments. The microphone is supplied with a snap-on windscreen, a storage bag, a gooseneck angle brace, and a cable management device. The preamplifier is attached to the microphone via a 10-foot high-flex cable and requires 11?52 Vdc phantom power. Tailored frequency response for open, natural sound reproduction Compact, lightweight construction provides a low degree of visibility Gooseneck, ratcheting swivel joint, and gooseneck angle brace allow for optimum placement and fixed positioning Legendary Shure ruggedness and reliability Fits several different types of woodwi...

Description:

Great mic cradle made in the Shure style, and fitting models 849, SM48, SM57, SM58, SM87A, SM94, Beta 57A, Beta 87, 515X, 545, 565, 588SDX, and BG1.1, 2.1, 3.1, 4.1, and 5.1.

Description:

The Oklahoma Sound Tie-Clip Microphone System allows speakers to wander up to 200 feet as they give presentations. It includes a clip-on microphone, a transmitter and a receiver. Both the transmitter and receiver are small enough to fit in standard...

Description:

The CM-100L Contact Microphone is a perfect compliment to any tuner that offers an audio input jack. The mic can be positioned to get a more sensitive reading, while allowing the tuner to be positioned for easier reading.

Description:

The e 815 S is a general-purpose cardioids microphone giving good quality at an affordable price. It features a rugged metal body, high suppression of handling noise and excellent rejection of feedback and spillage.PRODUCT FEATURES:Rugged metal housing;Shock-mounted capsule;Cardioid pick-up pattern;Hum compensation coil;Silent, lockable ON/OFF switch.

Description:

This miniature cardioid condenser microphone is ideal for woodwinds, brass, strings, piano, snare, and toms. It is perfect for active stage performances as it handles high-intensity sound without distortion.

Description:

Wireless Microphone System with Compact Transmitter, Receiver, and Cardioid Instrument Microphone - J1 Frequency

Description:

This heavy duty On-Stage Stands SSB-6500 is a padded speaker stand bag with ample room for either 2 speaker stands, 6 microphone stands or a load of drum hardware. This speaker stand bag features an adjustable shoulder strap with metal clip for fast...

Description:

The On-Stage Stands Tripod Mic Stand with Boom is a basic tripod mic stand with a 33" fixed boom. (Mic clip not included.)

Description:

OnStage MS7701B Tripod Boom Mic Stand

Description:

Description:

The AMT HR-2 mic is a clip-on version of the AMT HR1 hand held microphone system for harmonica. The system is low in profile, which allows it to be used with a standard neck harness. The microphone comes with clips to attach to the harmonica. The AMT...

Description:

The AMT Z1 Studio version combines the smallest and only specific flute microphone system on the market with the AMT AP40 floor preamp. The AP40 converts the microphones to low impedance. It regulates the voltage to each microphone, and with certain...

Description:

The AMT Z1 Studio version combines the smallest and only specific flute microphone system on the market with the AMT AP40 floor preamp. The AP40 converts the microphones to low impedance. It regulates the voltage to each microphone, and with certain...