Stage floor microphone Musical Instrument Microphones

Description:

This Shure Microflex MX391 is a small, low-profile surface mounted electret omnidirectional boundary microphone designed for mounting on conference tables, stage floors, and podiums. The MX391/O mic features high sensitivity and a wide frequency range...

Description:

The Crown PCC ® -160 (Phase Coherent Car-dioid ® ) is a surface-mounted supercardioid microphone intended for professional applica-tions on stage floors, lecterns, conference tables, and news desksâwherever improved gain-before-feedback and articulation are important. Similar to the Pressure Zone Microphone ® (PZM ® ), the PCC is designed to be used on a relatively large boundary surface. Unlike the PZM, the Phase Coherent Cardioid uses a subminiature supercardioid mic capsule. Its directional polar pattern improves gain-before-feedback, reduces unwanted room noise and rejects sounds from the rear. Surface-mounting creates a âhalf-supercar-dioidâ polar pattern and increases directivity 3 dB. Since the microphone capsule is placed on a boundary, direct and reflected sounds arrive at the diaphragm in-phase. This coherent addition of direct and reflected waves increases sensitivity 6 dB and prevents phase cancellations. The mic capsule is small enough to ensure phase coherency up to the highest frequencies in the audible spectrum, resulting in a wide, smooth frequency response free of phase interference. Clarity and reach are also enhanced. Self-contained electronics eliminate the need for an in-line preamp box. The PCC-160 can be phantom powered directly from the console or other remote power source providing 12 to 48 volts.

Description:

The Crown PCC ® -160 (Phase Coherent Car-dioid ® ) is a surface-mounted supercardioid microphone intended for professional applica-tions on stage floors, lecterns, conference tables, and news desksâwherever improved gain-before-feedback and articulation are important. Similar to the Pressure Zone Microphone ® (PZM ® ), the PCC is designed to be used on a relatively large boundary surface. Unlike the PZM, the Phase Coherent Cardioid uses a subminiature supercardioid mic capsule. Its directional polar pattern improves gain-before-feedback, reduces unwanted room noise and rejects sounds from the rear. Surface-mounting creates a âhalf-supercar-dioidâ polar pattern and increases directivity 3 dB. Since the microphone capsule is placed on a boundary, direct and reflected sounds arrive at the diaphragm in-phase. This coherent addition of direct and reflected waves increases sensitivity 6 dB and prevents phase cancellations. The mic capsule is small enough to ensure phase coherency up to the highest frequencies in the audible spectrum, resulting in a wide, smooth frequency response free of phase interference. Clarity and reach are also enhanced. Self-contained electronics eliminate the need for an in-line preamp box. The PCC-160 can be phantom powered directly from the console or other remote power source providing 12 to 48 volts.

Description:

Easy Payment Plan Available! Never knock a drink onto your gear or kick it over on the floor again. The MSA5050 Clamp-On Drink Holder keeps your drink safe and within easy reach while you perform. The attachment piece fits most standard mic stands and...

Description:

Designed to reduce the effects of low-end rumble and floor vibrations. 5/8-inch female threaded insert in a plastic base. 30mm opening for wireless mics.

Description:

Never knock a drink onto your gear or kick it over on the floor again. This Clamp-On Drink Holder keeps your drink safe and within easy reach while you perform. The attachment piece fits most standard mic stands and booms. The interior is lined with...

Description:

Designed to reduce the effects of low-end rumble and floor vibrations. 5/8-inch female threaded insert in a plastic base. 30mm opening for wireless mics.

Description:

Never knock a drink onto your gear or kick it over on the floor again. This Clamp-On Drink Holder keeps your drink safe and within easy reach while you perform. The attachment piece fits most standard mic stands and booms. The interior is lined with...

Description:

The CAD ST-100R is a superior low noise, electret condenser cardioid surface-mounted boundary microphone. It's ideal for use on altars, conference tables, stage floors, or television productions. The ST-100RR's electronics features an advanced...

Description:

Designed to reduce the effects of low-end rumble and floor vibrations, 5/8 inch - 27 female threaded insert in a plastic base, 25mm opening for dynamic mics.

Description:

Designed to reduce the effects of low-end rumble and floor vibrations, 5/8 inch - 27 female threaded insert in a plastic base, 25mm opening for dynamic mics.

Description:

Astatic 901, BLACK Portable Cardioid, Condenser Boundary Microphone. The ASTATIC 901 is a superior low noise, electret condenser cardioid surface mounted boundary microphone. It's ideal for use on altars, conference tables, stage floors, or television...

Description:

Shure Microflex MX391BP series microphones are small, surface mounted microphones designed for mounting on conference tables, stage floors, and lecterns. Their high sensitivity and wide frequency response make them especially suitable for picking up...

Description:

This Shure Microflex MX392 is a small, low-profile surface-mounted electret condenser boundary microphone designed for mounting on conference tables, stage floors, and lecterns. The MX392/S supercardioid mic features high sensitivity and a wide...

Description:

CROWN MICROPHONES, Unique in appearance, the PCC-160 is a surface-mounted supercardioid mic. Placement on a large boundary surface increases sensitivity 6 dB and prevents phase cancellations. While the PCC-160 is generally regarded as the industry...

Description:

Reduce the effects of low-end rumble and floor vibrations on stage with this microphone clip that features a 1" opening for dynamic microphones.

Description:

NEUMANN MICROPHONES & ACCESSORIES, Stands, SR 100 The SR 100 is part of a floor stand designed for the KM 100 system, for example using a KM 140. For connecting with the KM 100 output stage, a KA 100 cable adapter is necessary. The stand consists of an...

Description:

Crown's PCC-160W has long been recognized as the industry-standard stage-floor microphone! The Crown PCC-160W is a surface-mounted half-supercardioid microphone intended for professional applications on stage floors, lecterns, conference tables and...

Description:

Crown's PCC-160 has long been recognized as the industry-standard stage-floor microphone! The Crown PCC-160 is a surface-mounted half-supercardioid microphone intended for professional applications on stage floors, lecterns, conference tables and news...

Description:

Crown's PCC-160W has long been recognized as the industry-standard stage-floor microphone!The Crown PCC-160W is a surface-mounted half-supercardioid microphone intended for professional applications on stage floors, lecterns, conference tables and news...

Description:

Crown's PCC-160 has long been recognized as the industry-standard stage-floor microphone!The Crown PCC-160 is a surface-mounted half-supercardioid microphone intended for professional applications on stage floors, lecterns, conference tables and news...

Description:

Designed to reduce the effects of low-end rumble and floor vibrations, 5/8- 27 female threaded insert in a plastic base, 25mm opening for dynamic mics.

Description:

Designed to reduce the effects of low-end rumble and floor vibrations, 5/8-27 female threaded insert in a plastic base, 30mm opening for wireless mics.

Description:

Audix D2 Dynamic Instrument Mic - Audix D2 Ideal for rack toms, floor tom, congas and horns. Slight mid-bass boost. Designed, machined, assembled and tested by Audix in the USA, the D2 is a dynamic instrument microphone used for stage.

Description:

Astatic 901R Portable or mounted boundary mic for use on conference tables or stage floors. Improved RF immunity to greatly reduce susceptibility to radio interference from GSM based cell phones, PDA/cell phones, cell phones with walkie-talkie...