| Home > Computers & Software > Network Hub & Switches > 200 Mbps |
| Home > Computers & Software > Network Hub & Switches > 200 Mbps |
Lets Users Connect Securely to the Wireless LAN and Roam An integral part of the 3Com Wireless LAN Mobility System, the 3Com Wireless LAN Switch WX1200, together with 3Com Wireless Switch Manager software, centrally manages and controls up to 12 3Com Wireless LAN Managed Access Points (MAPs), and is ideally suited for moderate sized, but complex, wireless environments with the strictest security requirements. (More)
-Data Transfer Rate: 200 MBps - 10 Base T, 100 Base TX - Fast Ethernet, IEEE 802.3u, IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1x, IEEE 802.3ab, IEEE 802.3i, IEEE 802.3x, IEEE 802.1ad, IEEE 802.1s, IEEE 802.1w - 8 Ports (More)
The media-independent architecture of the Catalyst 5000 Family supports any type of data communication, including all legacy LAN and Asynchronous Transfer Mode (ATM) switching technologies through a wide range of Ethernet, Fast Ethernet, Gigabit Ethernet, Fiber Distributed Data Interface (FDDI), Token Ring, and ATM switch modules.Various Switching Modules delivered by Cisco for its Catalyst 5000 Multilayer Switches satisfy the specific customer needs for flexibility and expandability of their Cisco branded network hardware. (More)
THE CATALYST 2900 SERIES XL MODULES CAN ADD PORT DENSITY AND FIBER-OPTIC CONNECTIVITY TO A CATALYST 2900 SERIES XL NETWORK. WHEN INSTALLED IN A CATALYST 2912MF 2916M OR 2924M (REQUIRES SOFTWARE VERSION 11.2(8)SA4. IF THEY DON'T HAVE THAT VERSION THEY NEED TO GET A SMARTNET TO UPGRADE. IF THEY HAVE A 2916M-XL OR 2924M-XL-A THEY CAN BUY THE ENTERPRISE SOFTWARE UPGRADE.) SWITCH THESE MODULES SUPPORT SWITCHED 10BASET 100BASETX 100BASEFX 1000BSX OR 1000BLX CONNECTIONS. THE 10BASET/100BASETX MODULE AUTONEGOTIATES THE DUPLEX AND SPEED SETTINGS OF EACH PORT TO MATCH THAT OF THE ATTACHED DEVICE. KEY SELLING BULLETS THE 100BASEFX MODULE HAS FOUR SWITCHED 100BASEFX PORTS FOR 100-MBPS FIBER-OPTIC CONNECTIVITY. THE PORTS CAN RUN IN HALF-DUPLEX OR FULL-DUPLEX MODES. THE PORTS SUPPORT THE IEEE 802.3U 100BASET STANDARD AND USE STANDARD DUPLEX SC CONNECTORS. THE 100BASEFX PORTS USE 50/125- OR 62.5/125-MICRON MULTIMODE FIBER-OPTIC CABLING WITH DUPLEX SC CONNECTORS. WHEN SET TO RUN IN FULL-DUPLEX MODE 100BASEFX MODULE PORTS CAN CONNECT TO OTHER 100BASEFX-COMPATIBLE DEVICES OVER DISTANCES OF UP TO 2 KILOMETERS. THESE MODULES SUPPORT ISL 802.1P 802.1Q AND VTP PROVIDED THE MODULAR SWITCH USES THE ENTERPRISE FEATURE SET. Technical Specifications: SYSTEM AND OTHER REQUIREMENTS CATALYST 2912MF 2916M OR 2924M WITH AN OPEN SLOT. PRODUCT DIMENSIONS AND WARRANTY INFORMATION WARRANTY STANDARD WARRANTY: OTHER COMMENTS: THE WARRANTY ON THE SWITCHES ARE LIMITED LIFETIME. 5 YEARS ON THE FAN AND POWER SUPPLY. LIFETIME ON ALL OTHER HARDWARE IN THE SWITCH. PRODUCT TECHNICAL SPECIFICATIONS HARDWARE DEVICE TYPE: MODULE/ADD-ON COMPONENT INPUT VOLTAGE: 110V & 220V CONNECTIONS LAN PORT TYPE(S): 100BASE-FX (SC) (More)
The Catalyst 2900 series XL modules can add port density and fiber-optic connectivity to a Catalyst 2900 series network. When installed in a Catalyst 2912MF XL, Catalyst 2916M XL, or Catalyst 2924M XL switch, these modules support switched 10BaseT, 100BaseTX, 100BaseFX, or 1000BaseX connections. The 10BaseT/100BaseTX module autonegotiates the duplex and speed settings of each port to match that of the attached device. The 1000BaseX module autonegotiates the duplex mode only. (More)
4-port 10/100BASE-TX Fast Ethernet switch w/24 Long-Reach Ethernet (LRE) ports (for 5-15Mbps speed over existing Category 1/2/3 wiring) (More)
The SuperStack II Baseline family builds on the tremendous success of SuperStack II enterprise networking solutions by delivering powerful, unmanaged connectivity in a full range of networking technologies. From 10 Mbps Ethernet hubs to high-speed 10/100 Mbps switching, the Baseline family satisfies the need for high-quality products at an affordable price-enabling even the most budget-conscious organizations to trade up to the next level of networking power. SuperStack II Baseline hubs and switches provide cost-effective, unmanaged solutions across a wide range of networking technologies for people who need the assurance of high quality, reliability, and robustness of 3Com's SuperStack II family. The SuperStack II Baseline family comprises four key components: Ethernet workgroup hubs; Ethernet workgroup switches with Fast Ethernet uplinks; auto-sensing dual-speed Fast Ethernet hubs, which automatically optimize the speed of the network; and powerful 10/100 Mbps auto-sensing switches for the ultimate in dedicated high-speed connectivity. (More)
-Data Transfer Rate: 200 Mbps - 10 Base T, 100 Base TX, 1000 Base FX - Ethernet, IEEE 802.2, IEEE 802.3u - 2 Ports (More)
-Data Transfer Rate: 200 MBps - 10 Base T, 100 BASE FX, 100 Base TX, 1000 Base SX, 1000 Base TX - Ethernet, Fast Ethernet, IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3Z - 1.25 MB - 16 Ports (More)
The StarTech.com 10/100 Mbps PCI Ethernet Adapter is a high-speed, reliable network card for use in PC workstations, and workgroup servers. The card is fully PCI plug and play compliant, and has driver support for all versions of Windows, many versions of UNIX, Linux, and Novell NetWare. Full Duplex support allows the card to send and receive simultaneously, allowing data transfer rates of up to 200 Mbps if connected to a Fast Ethernet Switch. (More)
The 3Com SuperStack II Baseline 10/100 switches provide the highest performance product in the SuperStack II Baseline family. Delivering the power of switched Fast Ethernet while automatically sensing the speed of the connected devices, the SuperStack II Baseline switches are ideal for any environment where raw power and performance are needed, but management is not required. The Baseline 10/100 switches can be used as an aggregation device connecting to other switches or hubs, or to provide cost-effective, highest-performance desktop connections.The Baseline 10/100 switches provide 12 or 24 10/100BASE-TX (Fast Ethernet) switched ports that automatically detect the speed of connected devices, optimizing network performance to 100BASE-TX, where applicable. The SuperStack II Baseline switches are unmanaged and work straight out of the box. 12 or 24 RJ-45 10BASE-T/100BASE-TX auto-sensing ports provide the ultimate in high-speed switching connectivity. Autonegotiating full-/half-duplex operation on each port doubles the speed of each network connection to 200 Mbps. MAC addresses support up to 4,000 network devices on your local area network. IEEE 802.3x Flow Control ensures network traffic is not lost during peaks in traffic rates on high-throughput, full-duplex links. 19” size for easy installation in a wiring closet. A rackmounting kit is supplied. The product can also be used free-standing. Diagnostic LEDs indicate network traffic and port status of each port, making it easy to spot-check faults and check individual port status. (More)
-Data Transfer Rate: 200 MBps - 10 Base T, 100 Base TX - Ethernet, Fast Ethernet, IEEE 802.3, IEEE 802.3u, IEEE 802.1d, IEEE 802.1p, IEEE 802.1q - 8 MB - 16 Ports -Remote Management: SNMP, RMON (More)
-Data Transfer Rate: 200 MBps - 10 Base T, 100 Base TX, 1000 Base T - Fast Ethernet, IEEE 802.3, IEEE 802.3u, IEEE 802.1x, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3x, IEEE 802.3Z, IEEE 802.3ad, IEEE 802.1d STP, IEEE 802.1s, IEEE 802.1w - 8 Ports (More)
-Data Transfer Rate: 200 Mbps - 10 Base T, 100 BASE FX, 100 Base TX - Ethernet, IEEE 802.3, IEEE 802.3u - 1 Ports (More)
The media-independent architecture of the Catalyst 5000 Family supports any type of data communication, including all legacy LAN and Asynchronous Transfer Mode (ATM) switching technologies through a wide range of Ethernet, Fast Ethernet, Gigabit Ethernet, Fiber Distributed Data Interface (FDDI), Token Ring, and ATM switch modules.Various Switching Modules delivered by Cisco for its Catalyst 5000 Multilayer Switches satisfy the specific customer needs for flexibility and expandability of their Cisco branded network hardware. (More)
-Data Transfer Rate: 200 MBps - 10 Base T, 100 BASE FX, 100 Base TX - Fast Ethernet, IEEE 802.3, IEEE 802.3u - 6 Ports (More)
The SuperStack II Switch 1100 is perfect for desktop connectivity, and its ability to scale to larger configurations makes it equally suited for handling hub aggregation. A single device can support up to 6,000 MAC addresses. Likewise, the SuperStack II Switch 3300 is suitable for handling desktop, hub, and switch aggregation in large networks. A single device can support up to 12,000 MAC addresses. The SuperStack II Switch 1100 is available in 12- and 24-port versions and features two built-in auto-sensing 10/100 Fast Ethernet ports; the SuperStack II Switch 3300 is available in a 24-port version. All models have a matrix port on the rear of the unit that enables high-speed connection to other SuperStack II Switch 1100 and Switch 3300 units. This eliminates the bottlenecks caused by interconnecting switches with Fast Ethernet ports. What's more, the stacked switches can be managed as a single entity and share a single IP address. Two units can be connected back-to-back with a SuperStack II Switch Matrix Cable (3C16965). To connect more than two units, a SuperStack II Switch Matrix Module (3C16960) can be inserted into the high-speed module slot of one of the units in the stack, and a SuperStack II Switch Matrix Cable can be used to connect to each switch in the stack. This enables you to scale up to one larger virtual switch of up to 110 switched ports. Interswitch links are created through the high-performance SuperStack II Switch Module that connects the switches to deliver 4 x 1 Gbps links between switches; this ensures high-speed communication with no bottlenecks between switches. Plus, it does not consume valuable Fast Ethernet or Gigabit Ethernet ports. As with other SuperStack II switches, the new SuperStack II Switch 1100 and Switch 3300 feature auto-sensing 10/100 ports that adjust for 10BASE-T and 100BASE-TX attached devices. Both switches automatically provide full-duplex/half-duplex capability on all ports to boost bandwidth for servers and power users. Plus, they both help you implement advanced policy-based management across the network with features such as support for Fast IP, IGMP snooping, IEEE 802.1p prioritization, and IEEE 802.1Q standards-based VLANs. (More)
-Data Transfer Rate: 200 MBps - 10 Base T, 100 Base TX - Fast Ethernet, IEEE 802.1p - 64 MB - 24 Ports -Remote Management: SNMP (More)
Stores are responsible for providing BizRate with correct and current prices. Sales taxes and shipping costs are estimates; please check store for exact amounts. Product specifications are obtained from merchants or third parties. Although we make every effort to present accurate information, BizRate is not responsible for inaccuracies. We encourage you to notify us of any discrepancies by clicking here.
Store ratings and product reviews are submitted by online shoppers; they do not reflect our opinions and we have no responsibility for their content.
See the 2007 Circle of Excellence Winners!