Transition Networks, 100 Networking Products

you're in Networking Products

Advertisement
Advertisement
sort by:
view as:      
add tax & shipping for
 
 
 

starting at

$137
  • product
The "Just Convert-It" Bridging Media Converter is an inexpensive, no frills way to extend the distance between connections with different speeds or duplex using fiber optic cable, while maintaining the same quality and reliability found on Transition's full-featured line of products.

starting at

$137
 

starting at

$135
  • product
The "Just Convert-It" Bridging Media Converter is an inexpensive, no frills way to extend the distance between connections with different speeds or duplex using fiber optic cable, while maintaining the same quality and reliability found on Transition's full-featured line of products.

starting at

$135
 

starting at

$214
  • product
Ethernet, Fast Ethernet Connection

starting at

$214
 

starting at

$214
  • product
Transition Networks' 100BASE-TX to 100BASE-FX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.The Media Converter operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. The Media Converter also automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure.The converter will automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link. Pause is a component of Auto-negotiation and because auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without Transition Networks' converters. Enabling the Pause feature on the converters between two switches allows users to take advantage of this flow control feature on their equipment.

starting at

$214
 

starting at

$341
  • product
Transition Networks' 100BASE-TX to 100BASE-FX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.The Media Converter operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. The Media Converter also automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure.The converter will automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link. Pause is a component of Auto-negotiation and because auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without Transition Networks' converters. Enabling the Pause feature on the converters between two switches allows users to take advantage of this flow control feature on their equipment.

starting at

$341
 

starting at

$386
  • product
1000Base-SX, 1000Base-T - RJ-45 - SC multi-mode - plug-in module - up to 1800 ft - 850 nm

starting at

$386
 

starting at

$129
  • product
Stand-Alone Mini 10/100 Bridging - Media converter - 10Base-T, 100Base-FX, 100Base-TX - RJ-45 - SC multi-mode - external - up to 1 miles - 1300 nm

starting at

$129
 

starting at

$153
  • product
Cable - Ethernet, Fast Ethernet Connection

starting at

$153
 

starting at

$178
  • product
The "Just Convert-It" Bridging Media Converter is an inexpensive, no frills way to extend the distance between connections with different speeds or duplex using fiber optic cable, while maintaining the same quality and reliability found on Transition's full-featured line of products.

starting at

$178
 

starting at

$186
  • product
1 x DB-9 Serial , 1 x SC 100Base-FX - 115 Kbps, 100 Mbps

starting at

$186
 

starting at

$214
  • product
Transition Networks' 100BASE-TX to 100BASE-FX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.The Media Converter operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. The Media Converter also automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure. The converter will automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link. Pause is a component of Auto-negotiation and because auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without Transition Networks' converters. Enabling the Pause feature on the converters between two switches allows users to take advantage of this flow control feature on their equipment.

starting at

$214
 

starting at

$363
  • product
The Raven Series of Converters offers connectivity solutions for a broad range of environments....

starting at

$363
 

starting at

$610
  • product
Single strand fiber enables network planners to double the backbone capacity or split up workgroup backbone connections and assign a separate strand for mission critical applications. Only Transition Networks guarantees compatibility with any 10/100 compliant port. This feature allows you to force the proper port configuration through an external switch on the converter; unlike competitive products that ship in auto-negotiation mode and may require both hardware and software configuration.

starting at

$610
 

starting at

$734
  • product
"Transition Ethernet Media Converter - Transceiver - 100Base-FX, 100Base-TX - RJ-45 - SC single mode - external"

starting at

$734
 

starting at

$67
  • product
8 Ports - Gigabit Ethernet - 10Base T, 100Base TX, 1000Base T

starting at

$67
 

starting at

$136
  • product
UTP to Fiber Converter - 10Base-T, 100Base-FX, 100Base-TX - RJ-45 - ST multi-mode - external - up to 1 miles - 1300 nm

starting at

$136
 

starting at

$186
  • product
Item #: 93039D. Transition Networks's Device Servers provide a serial-to-Ethernet conversion to enable customers to integrate any legacy serial-based device into their Ethernet networks. The device servers can connect to RS-232, RS-422 or RS-485 serial ports and provide a 10/100BASE-TX or 100BASE-FX Ethernet fiber optic connection for links up to 80 km.This device converts serial interface (DB-9 connector, effective operating distance: 15 m/49 ft) into optic, multimode, interface with wave-length: 1300nm (ST connector, effective operating distance: 2 km/1.2 mi, Link Budget: 12.0 dB). Customers also search for: Discount Transition Device Server - Device Server - Fast EN, RS-232, RS-422, RS-485, Buy Transition Device Server - Device Server - Fast EN, RS-232, RS-422, RS-485 Wholesale Transition Device Server - Device Server - Fast EN, RS-232, RS-422, RS-485, 0648177003990, SDSFE3111-120, Device Servers

starting at

$186
 

starting at

$212
  • product
TRANSITION Networks CFETF10xx-205 series Fast Ethernet media converters, designed to be installed in a PointSystem Media Conversion Center, connect 100BASE-TX shielded or unshielded twisted-pair copper cable to 100BASE-FX multimode or singlemode fiber-optic cable. CFETF1013-205 provides an RJ-45 twisted-pair copper 100BASE-TX connector and an RX (receive) and TX (transmit) MM-SC 100BASE-FX connector to multimode 1300nm fiber-optic cable.

starting at

$212
 

starting at

$218
  • product
With Transition Networks' Full-Featured 100BaseTX to 100BaseFX Media Converter, cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks is easier than ever before. It automatically detects and reports loss of link on a connec

starting at

$218
 

starting at

$219
  • product
Transition Networks' 100BaseTX to 100BaseFX Media Converter is available in both stand-alone and...

starting at

$219
You'll find the best prices on Transition Networks, 100 in Networking Products when you shop online at bizrate. Do all your comparison shopping for Cisco, Transition Networks and HP Networking Products in one place. Compare models and see which online Computers & Software stores have the best merchant ratings. Make an informed decision on Transition Networks, 100 Networking Products before you buy. bizrate will help you with all of your holiday gift shopping needs. Buy Linksys Wireless-G Range Expander Router Wireless Signal Booster or Linksys WUSB600N USB Network Adapter.