Converter transceiver Networking Products

Omnitron Systems Switch Transceiver Medi...

starting at

$129

product

IMC Networks 85510625 Transceiver Media Converter

Designed and manufactured in the USA, the MiniMc series extends 10 Mbps and 100 Mbps twisted pair network segments over regular duplex or single-strand fiber optics. Both a media converter and data rate converter, the MiniMc series features 10/100 auto-negotiation on the twisted pair port while the fiber port operates at 100 Mbps Fast Ethernet full duplex.MiniMc is the most versatile media converter in today's market - it is available with an external AC power supply, with a USB power cable, or for installation into the PowerTray/18 which allows the industry's highest port density - 18 conversions.MiniMc 10/100 switching fiber media converters are ideal for any premises, FTTD, LAN-to-LAN or LAN-to-MAN fiber networking applications.

starting at

$129

Transition Networks Hub Switch Router Tr...

starting at

$182

product

Omnitron Systems Switch Transceiver Media Converter

4330-1

starting at

$182

starting at

$214

product

Transition Networks Hub Switch Router Transceiver Media Converter

Transition Networks' 100BASE-TX to 100BASE-FX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.The Media Converter operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. The Media Converter also automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure.The converter will automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link. Pause is a component of Auto-negotiation and because auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without Transition Networks' converters. Enabling the Pause feature on the converters between two switches allows users to take advantage of this flow control feature on their equipment.

starting at

$214

Allied Telesyn CentreCOM Transceiver Med...

starting at

$341

product

Transition Networks Transceiver Media Converter

Transition Networks' 100BASE-TX to 100BASE-FX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.The Media Converter operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. The Media Converter also automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure.The converter will automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link. Pause is a component of Auto-negotiation and because auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without Transition Networks' converters. Enabling the Pause feature on the converters between two switches allows users to take advantage of this flow control feature on their equipment.

starting at

$341

Available at 21 stores

starting at

$393

product

Allied Telesyn CentreCOM Transceiver Media Converter

The Allied Telesyn range of Fast Ethernet Media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fiber cabling. Supporting both SC and ST fiber connectors, these converters can

starting at

$393

Allied Telesyn Other Transceiver Media C...

Canary Communications Switch Other Trans...

starting at

$393

product

Allied Telesyn Other Transceiver Media Converter

Allied Telesis' AT-MC1004 Gigabit Ethernet media converters extend the reach of Gigabit Ethernet networks through the use of multi-mode and single-mode fiber-optic cabling. By converting 1000T copper connections to 1000SX or LX connections, these Gigabit Ethernet media converters can extend segment lengths up to 10km. Although the provisioning of Gigabit Ethernet connections is becoming relatively inexpensive, thanks in part to the availability of lower-cost copper Gigabit network adapters, the distance limitations of copper cabling make fiber segments a necessity in most networks. Small, comparatively inexpensive copper to fiber Gigabit Ethernet media converters present a simple and very cost-effective way of connecting Gigabit Ethernet LANs over extended distances.To aid installation these media converters support an auto-sense MDI/MDIX port, allowing the media converter to connect directly with either a switch, PC adapter, or other Gigabit Ethernet device, using a standard cable. The AT-MC1004 Gigabit Ethernet media converters are powered by an external power supply for use in standalone applications. Where multiple media converters are used, up to 12 standalone devices can be inserted into the low-cost AT-MCR12 rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second load sharing internal power supply can be installed into the rackmount chassis.

starting at

$393

Available at 14 stores

starting at

$158

product

Canary Communications Switch Other Transceiver Media Converter

FX/TX ST-TYPE 2 KM Technical Specifications: 100-BASE TX/FX FAST ETHERNET CONVERTER KEY SELLING BULLETS THE CFT SERIES CONVERTS 100-BASE TX TO 100-BASE FX WITH EASY INSTALLATION AND SWITCH SELECTABLE. PRODUCT DIMENSIONS AND WARRANTY INFORMATION PRODUCT PHYSICAL DIMENSIONS LENGTH: 5.75 WIDTH/DEPTH: 2.85 HEIGHT: 1.0 WEIGHT: 2 LBS. WARRANTY STANDARD WARRANTY: 3 YEARS ONSITE SUPPORT? NO ONSITE YEAR 2? NO ONSITE YEAR 3? NO NEXT DAY SUPPORT? NO COMMENTS: ALL CANARY PRODUCTS CARRY A 3 YEAR WARRANTY PRODUCT TECHNICAL SPECIFICATIONS DEVICE TYPE: CONVERTER SNMP MANAGEABLE? NO CONSOLE PORT TYPE: FLD:CONSOLE_PORT RACKMOUNT KIT? NO WALLMOUNT KIT? NO

starting at

$158

Available at 16 stores

starting at

$182

product

Omnitron Systems Transceiver Media Converter

starting at

$182

Available at 18 stores

starting at

$197

product

Omnitron Systems Transceiver Media Converter

43401 - Ethernet Connection

starting at

$197

Available at 16 stores

starting at

$214

product

Transition Networks Transceiver Media Converter

Transition Networks' 100BASE-TX to 100BASE-FX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.The Media Converter operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. The Media Converter also automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure. The converter will automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link. Pause is a component of Auto-negotiation and because auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without Transition Networks' converters. Enabling the Pause feature on the converters between two switches allows users to take advantage of this flow control feature on their equipment.

starting at

$214

Available at 18 stores

starting at

$346

product

Omnitron Systems Transceiver Media Converter

The FlexPoint Gx converter is an IEEE 802.3ab compliant Gigabit Ethernet 1000Base-T unshielded twisted pair (UTP) to 1000Base-Sx or 1000Base-Lx fiber converter. It is a member of the modular FlexPoint product line that provides a wide range of connectivity options across different network and media types.The FlexPoint Gx features Auto-Negotiation, which allows auto-adapting to the full/half duplex and flow control services supported by the device connected to its UTP port. User-selectable override options are provided to set to the desired mode. The FlexPoint Gx operates in full-duplex providing an effective two-Gigabit data rate or in half-duplex at one Gigabit. This feature maximizes the throughput when connecting to high bandwidth full-duplex devices such as servers or switches.

starting at

$346

Available at 13 stores

starting at

$610

product

Transition Networks Transceiver Media Converter

Single strand fiber enables network planners to double the backbone capacity or split up workgroup backbone connections and assign a separate strand for mission critical applications. Only Transition Networks guarantees compatibility with any 10/100 compliant port. This feature allows you to force the proper port configuration through an external switch on the converter; unlike competitive products that ship in auto-negotiation mode and may require both hardware and software configuration.

starting at

$610

Transition Networks Hub Switch Router Tr...

Available at 15 stores

starting at

$771

product

Omnitron Systems Transceiver Media Converter

starting at

$771

Available at 12 stores

starting at

$218

product

Transition Networks Hub Switch Router Transceiver Media Converter

With Transition Networks' Full-Featured 100BaseTX to 100BaseFX Media Converter, cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks is easier than ever before. It automatically detects and reports loss of link on a connec

starting at

$218

Available at 11 stores

starting at

$973

product

Transition Networks Transceiver Media Converter

The DS3-T3/E3 copper to fiber media converter will provide a solution for those users that desire to extend the point of presence of their DS3 or E3 connection or use it to connect remote locations via T3/E3.

starting at

$973