Fx media converter Networking Products

you're in Networking Products, see other matches in:

Advertisement
Advertisement
sort by:
view as:      
add tax & shipping for
 
 
 

starting at

$140
  • product
The "Just Convert-It" Bridging Media Converter is an inexpensive, no frills way to extend the distance between connections with different speeds or duplex using fiber optic cable, while maintaining the same quality and reliability found on Transition's full-featured line of products.

starting at

$140
 

starting at

$226
  • product
Transition Networks offers networking connectivity solutions that make the conversion between disparate media types possible. The company designs and markets these media conversion technologies across a broad spectrum of networking protocols including Ethernet, Fast Ethernet, ATM, Gigabit and Token Ring.Transition Networks' 100BASE-TX to 100BASE-FX Media Converter makes cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.

starting at

$226
 
store rating:
  • product
The Allied Telesyn® AT-MC101XL-10 Fast Ethernet Media Converter allows users to extend the size of UTP networks with the use of fiber cabling. It supports ST fiber connectors and can be used to extend networks with up to 1.24 miles of fiber. When...
at
 
  • product
FlexPoint 100BASE-TX to 100BASE-FX Modular Media Converters, Multimode, 1300-nm, 2 km Full-Duplex,
 
  • product
FlexPoint Modular Media Converters , 100BASE-TX to 100BASE-FX, Multimode, 1300-nm, 2 km Full-Duplex
 

starting at

$72
  • product
Convert 1000BASE-T ports over to 1000BASE-SX/LX on a port-by-port basis. Used individually or in pairs, this media converter can extend Gigabit Ethernet up to 2 km over multimode fiber or up to 65 km over single mode fiber.

starting at

$72
 

starting at

$129
  • product
Stand-Alone Mini 10/100 Bridging - Media converter - 10Base-T, 100Base-FX, 100Base-TX - RJ-45 - SC multi-mode - external - up to 1 miles - 1300 nm

starting at

$129
 
store rating:
  • product
Satisfying today's networking needs while preparing for tomorrow's requirements in cabling bandwidth, distance and security, can make designing and installing the physical layer of networks a daunting task. The decreasing cost of fiber optic cabling ...
 

starting at

$47
  • product
RJ-45 - 10/100Base-TX - Duplex - 100Base-FX - UTP / STP - Fiber

starting at

$47
 

starting at

$547
  • product
Fast Ethernet with Remote Management and Bandwidth Allocation Point System Slide-In-Module Media Converter - Media converter - 100Base-FX, 100Base-TX - RJ-45 - SC single mode - plug-in module - up to 12 miles - 1300 nm

starting at

$547
 
store rating:
  • product
Network managers worldwide rely on the MediaConverter series when converting twisted pair cabling to fiber optics. The modular MediaConverter series is the most cost-effective, flexible solution for everyday fiber networking in the LAN, campus ...
 
store rating:
  • product
The TFC-110S15i intelligent fiber converter works with the TFC-1600 chassis system or as standalone unit. This converter is a single mode SC-type fiber converter that supports SNMP management and spans distances of up to 15km.
 

starting at

$120
  • product
The Allied Telesis' range of Fast Ethernet Media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fiber cabling. Supporting all major fiber connectors, with support for both multi and single mode fiber, these converters can be used to extend networks with up to 2km of fiber.This is a CentreCOM TX to FX media converter with SC fiber connectors.

starting at

$120
 

starting at

$91
  • product
TFC-110S20D3 or TFC-110S20D5 Bi-Directional Single Strand Fiber Media Converter transforms 10/100Base-TX UTP/STP media to 100Base-FX media and vice versa. The 10/100Base-TX Port Auto-negotiates between 10 and 100Mbps connection speed and supports Auto-MDI

starting at

$91
 

starting at

$734
  • product
"Transition Ethernet Media Converter - Transceiver - 100Base-FX, 100Base-TX - RJ-45 - SC single mode - external"

starting at

$734
 

starting at

$214
  • product
Transition Networks' 100BASE-TX to 100BASE-FX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.The Media Converter operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. The Media Converter also automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure.The converter will automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link. Pause is a component of Auto-negotiation and because auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without Transition Networks' converters. Enabling the Pause feature on the converters between two switches allows users to take advantage of this flow control feature on their equipment.

starting at

$214
 

starting at

$148
  • product
The Raven Series of Converters offers connectivity solutions for a broad range of environments. Whether connecting two remote locations, or solving a difficult wiring closet issue, the Raven Series has a product to meet your needs. The standalone converters are ideal for remote locations requiring a single, cost effective fiber link. These converters may be consolidated into a 19 inch rack system, allowing for utilization of a common product in the main or intermediate distribution frame and at the remote location. For those needing visibility into how their network is operating, a managed media conversion system is available.The Raven Series is designed with ease of use in mind. The UTP port will auto-detect the cabling type (cross over or straight through), the polarity of the pins, the speed of the port and the mode of the port without any user intervention. No more concerns about what type of device the converter is connecting, whether hub or server. The broad range of media for the fiber port makes for optimal flexibility in designing the network, and upgrading the network in the future.This product has been designed with diagnostic functions as well. The LinkSentry feature allows for passing through physical layer failures from one media to the other. This allows for a higher reliability in your network by making all components aware of network failures as they occur. The managed system takes this further by sending traps when link failures are seen on the ports. The ease of use, flexibility in network design, Advanced diagnostic capabilities and management features make the Raven series of converters the optimal conversion product for your network.

starting at

$148
You'll find the best prices on Fx media converter in Networking Products when you shop online at bizrate. Do all your comparison shopping for Transition Networks, IMC Networks and Omnitron Systems Networking Products in one place. Compare models and see which online Computers & Software stores have the best merchant ratings. Make an informed decision on Fx media converter Networking Products before you buy. bizrate will help you with all of your holiday gift shopping needs. Buy Transition Networks Media Converter or Transition Networks M/E-PSW-FX-01-NA Media Converter.