Media networking Networking Products

Description:

10Base-T / 1000Base-LX / 100Base-TX / 1000Base-T - RJ-45 - SC Single Mode - External

Description:

1000BASE-LX connectivity over 10Km One SC connector, Hot-Swappable Gigabit Interface Converter (GBIC) module Adds fiber connectivity to FSM750S, FSM726S, FSM726, Works with 9 µm single mode cabling.

Description:

Qty 1 Wireless-N Simultaneous Dual-N Band Entertainment Router with Gigabit and Storage Link WRT610N Qty 1 1TB Media Hub Home Entertainment Network Storage NMH410

Description:

Qty 1 Wireless-N Simultaneous Dual-N Band Entertainment Router with Gigabit and Storage Link WRT610N Qty 1 1TB Media Hub Home Entertainment Network Storage NMH410 (includes one pre-installed hard drive and one drive bay available for 2nd hard drive)...

Description:

Providing a complete family of conversion devices, Allied Telesis' Ethernet media converter enables service providers to use fiber cabling to extend the size of UTP networks. Supporting ST fiber connectors, this converter can be used to extend networks with up to 2km of fiber.When connected to auto-negotiating Fast Ethernet switches, this media converter connects the link in either Ethernet full- or half-duplex mode, thereby establishing a link with the greatest-possible bandwidth.The MissingLink feature allows the ports on the media converter to convey the status of their links. When the media converter detects a problem with a port - such as the loss of connection to a node - it shuts down the connection, thereby notifying the node that the connection has been lost. The value of this network monitoring and fault notification is that some hubs and switches are configured to take action in the event of the loss of connection on a port. In some cases, the unit is configured either to seek a redundant path or alert the network administrator of the problem.The media converter features an internal MDI/MDIX switch, enabling the converter to connect to a PC, hub, or switch with a simple UTP cable. The media converter can also test the integrity of connections by forcing data across the fiber cable - enabling installers to check for cable faults without the need for expensive fiber-optic test equipment.

Description:

The G8 series offers the latest industry standard in flexible, full-duplex Gigabit Ethernet connectivity. These hot-swappable, fibre interfaces simply plug into a GBIC slot on Allied Telesis GBIC compatible Layer 2 switches. The migration path to Gigabit Ethernet has never been easier.

Description:

RJ-45 - 10/100Base-TX - Duplex - 100Base-FX - UTP / STP - Fiber

Description:

CFETF1014-205

Description:

TRENDnet's TFC-110 series Fiber Media Converter transforms 10/100BaseTX UTP/STP media to 100BaseFX media and vice versa. The 10/100BaseTX port auto-senses 10 or 100Mbps connection speed, auto-negotiates half-/full-duplex mode, and auto-selects MDI-X / MDI-II media type. The fiber connection can be multi-mode SC, MT-RJ, or single-mode SC Connector and it has a slide-switch for selecting half- or full-duplex mode. This converter will give your Switch/Hub the ability to interface with fiber connection over a distance up to 75 km. With the optional 16-slot EIA-19" rack-mount chassis, the TFC series converters are the perfect solutions for various fiber media conversions for your network.

Description:

RJ45 - LC Multi-mode - External

Description:

OPEN BOX Product. 30-Day Money-Back Satisfaction Guarantee!

Description:

Pure Networking Media Converters are affordable, transparent to network operation, and compact enough to be used on the desktop or mounted on a wall.

Description:

10Base-T, 10Base-2 (coax) - BNC - RJ-45 - external - up to 610 ft

Description:

Tripp Lite's N784-001-ST 10/100 Media Converter is an economical way to extend the distance (up to 2Km) of network nodes by converting Cat5/6 UTP cables to Fiber Optic. The Media Converter features automatic MDI/MDI-X configuration, and the UTP port senses the network speed automatically as well. Dip switches allow half or full duplex operation on the fiber port. Power supplied by either AC-DC adapter, or USB connection (switch selectable).

Description:

Extend your digital lifestyle. ViewSonic`s WMA100 Wireless Media Adapter works in conjunction with the ViewSonic Wireless Media Gateway or any other media server, 802.11b/g router or PC, to WIRELESSLY EXTEND YOUR DIGITAL ENTERTAINMENT to any TV,...

Description:

Tripp Lite's N784-001-SC 10/100 Media Converter is an economical way to extend the distance (up to 2Km) of network nodes by converting Cat5/6 UTP cables to Fiber Optic. The Media Converter features automatic MDI/MDI-X configuration, and the UTP port senses the network speed automatically as well. Dip switches allow half or full duplex operation on the fiber port. Power supplied by either AC-DC adapter, or USB connection (switch selectable).

Description:

Cable, Serial - Serial Connection

Description:

4320-1

Description:

With: BNC - SC Single Mode - Plug-in Module

Description:

Convert 1000BASE-T ports over to 1000BASE-SX/LX on a port-by-port basis. Used individually or in pairs, this media converter can extend Gigabit Ethernet up to 2 km over multimode fiber or up to 65 km over single mode fiber.

Description:

Transition Networks' 100BASE-TX to 100BASE-FX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.The Media Converter operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. The Media Converter also automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure.The converter will automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link. Pause is a component of Auto-negotiation and because auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without Transition Networks' converters. Enabling the Pause feature on the converters between two switches allows users to take advantage of this flow control feature on their equipment.

Description:

Transition Networks' 100BASE-TX to 100BASE-FX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.The Media Converter operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. The Media Converter also automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure.The converter will automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link. Pause is a component of Auto-negotiation and because auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without Transition Networks' converters. Enabling the Pause feature on the converters between two switches allows users to take advantage of this flow control feature on their equipment.

Description:

The Allied Telesyn range of Fast Ethernet Media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fiber cabling. Supporting both SC and ST fiber connectors, these converters can

Description:

Ethernet, Fast Ethernet Connection

Description:

. Product may differ from image shown

Description:

Pure Networking Media Converters are affordable, transparent to network operation, and compact enough to be used on the desktop or mounted on a wall.

Description:

Pure Networking Media Converters are affordable, transparent to network operation, and compact enough to be used on the desktop or mounted on a wall.

Description:

Transition Networks' 100BASE-TX to 100BASE-FX Media Converter makes cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.Used in pairs, this media converter can extend distances between two twisted pair switches or a switch and a server up to 2,000 meters over multimode fiber, or up to 80,000 meters over single mode fiber. Using one media converter, a switch with a copper port can be connected to a switch with an existing fiber interface.

Description:

2 x RJ-45 10/100Base-TX Duplex - 1 x SC 100Base-FX - UTP/STP - Fiber

Description:

The Raven Series of Converters offers connectivity solutions for a broad range of environments. Whether connecting two remote locations, or solving a difficult wiring closet issue, the Raven Series has a product to meet your needs. The standalone converters are ideal for remote locations requiring a single, cost effective fiber link. These converters may be consolidated into a 19 inch rack system, allowing for utilization of a common product in the main or intermediate distribution frame and at the remote location. For those needing visibility into how their network is operating, a managed media conversion system is available.The Raven Series is designed with ease of use in mind. The UTP port will auto-detect the cabling type (cross over or straight through), the polarity of the pins, the speed of the port and the mode of the port without any user intervention. No more concerns about what type of device the converter is connecting, whether hub or server. The broad range of media for the fiber port makes for optimal flexibility in designing the network, and upgrading the network in the future.This product has been designed with diagnostic functions as well. The LinkSentry feature allows for passing through physical layer failures from one media to the other. This allows for a higher reliability in your network by making all components aware of network failures as they occur. The managed system takes this further by sending traps when link failures are seen on the ports. The ease of use, flexibility in network design, Advanced diagnostic capabilities and management features make the Raven series of converters the optimal conversion product for your network.