Slide converter Networking Products

Description:

Point System Slide-In-Module media converter is designed to be used in any of the Point System chassis. Each Point System Slide-In-Module media converter, regardless of protocol, can slide into the same chassis and provide managed media conversion services to suit a custom network application.

Description:

Point System Slide-In-Module media converter is designed to be used in any of the Point System chassis. Each Point System Slide-In-Module media converter, regardless of protocol, can slide into the same chassis and provide managed media conversion ...

Description:

CFETF1014-205

Description:

Fast Ethernet with Remote Management and Bandwidth Allocation Point System Slide-In-Module Media Converter - Media converter - 100Base-FX, 100Base-TX - RJ-45 - SC single mode - plug-in module - up to 12 miles - 1300 nm

Description:

Point System Slide-In-Module media converter is designed to be used in any of the Point System chassis. Each Point System Slide-In-Module media converter, regardless of protocol, can slide into the same chassis and provide managed media conversion ...

Description:

Point System Slide-In-Module media converter is designed to be used in any of the Point System chassis. Each Point System Slide-In-Module media converter, regardless of protocol, can slide into the same chassis and provide managed media conversion...

Description:

Point System Slide-In-Module media converter is designed to be used in any of the Point System chassis. Each Point System Slide-In-Module media converter, regardless of protocol, can slide into the same chassis and provide managed media conversion...

Description:

1310 nm - 1.25 Mbps Half / Full Duplex

Description:

2 x BNC T3/E3 - SC Single Mode - Slide In Module

Description:

Transition Networks designs and manufactures Conversion Technology products, specializing in media converters. These products help customers cost-effectively deploy fiber by reducing the costs of electronics as much as 40%. The company's products are designed to protect the investment made in network infrastructure while optimizing its performance capacity. The DS3-T3/E3 copper to fiber media converter will provide a solution for those users that desire to extend the point of presence of their DS3 or E3 connection or use it to connect remote locations via T3/E3.

Description:

TRANSITION Networks CFETF10xx-205 series Fast Ethernet media converters, designed to be installed in a PointSystem Media Conversion Center, connect 100BASE-TX shielded or unshielded twisted-pair copper cable to 100BASE-FX multimode or singlemode fiber-optic cable. CFETF1013-205 provides an RJ-45 twisted-pair copper 100BASE-TX connector and an RX (receive) and TX (transmit) MM-SC 100BASE-FX connector to multimode 1300nm fiber-optic cable.

Description:

Point System Slide-In-Module media converter is designed to be used in any of the Point System chassis. Each Point System Slide-In-Module media converter, regardless of protocol, can slide into the same chassis and provide managed media conversion...

Description:

Point System Slide-In-Module media converter is designed to be used in any of the Point System chassis. Each Point System Slide-In-Module media converter, regardless of protocol, can slide into the same chassis and provide managed media conversion...

Description:

10/100/1000BTX TO 1000BLX 1310NM SM SC

Description:

Used in conjunction with lower cost 1000BASE-T switches, companies can take advantage of the high bandwidth Gigabit Ethernet offers without all of the higher costs. Transition Networks's 1000BASE-T to SX/LX converters allow users to extend the bandwidth to those users outside the reach of the 1000BASE-T standard (up to 125 km).

Description:

4 x RJ-48 - SNMP - 6 Pin DIN

Description:

With: BNC - SC Single Mode - Plug-in Module

Description:

With: 1000Base-LX, 1000Base-T - SC multi-mode - RJ-45 - plug-in module - up to 1 miles - 1310 nm

Description:

100Base-FX, 100Base-TX - RJ-45 - SC multi-mode - plug-in module - up to 1 miles - 1300 nm

Description:

1000Base-SX, 1000Base-T - RJ-45 - SC multi-mode - plug-in module - up to 1800 ft - 850 nm

Description:

Transition Networks Slide-In-Module Media Converter - 1 x RJ-45 100Base-TX , 1 x ST 100Base-FX - UTP, Fiber - Media Converter, transition networks slide-in-module media converter - 1 x rj-45 , 1 x st - 100base-tx, 100base-fx d61796 43201553 648177011889 1

Description:

Transition Networks Slide-In-Module Media Converter - 1 x RJ-45 100Base-TX Simplex, 1 x SC 100Base-FX - UTP, Fiber - Media Converter, transition networks slide-in-module media converter - 1 x rj-45 , 1 x sc - 100base-tx, 100base-fx d61804 43201553 6481770

Description:

Point System Slide-In-Module Media Converters The DS3-T3/E3 copper to fiber media converter will provide a solution for those users that desire to extend the point of presence of their DS3 or E3 co...

Description:

Point System Slide-In-Module Media Converters, when used in pairs, can extend distances between...

Description:

1 x RJ-45 - 10/100/1000Base-T

Description:

1 x RJ-45 , 1 x SC - 10/100/1000Base-T, 1000Base-LX

Description:

1 x RJ-45 , 1 x SC - 10/100/1000Base-T, 1000Base-LX

Description:

Ethernet, Fast Ethernet Connection

Description:

Point System Slide-In-Module media converter is designed to be used in any of the Point System chassis. Each Point System Slide-In-Module media converter, regardless of protocol, can slide into the same chassis and provide managed media conversion ...

Description:

Point System Slide-In-Module media converter is designed to be used in any of the Point System chassis. Each Point System Slide-In-Module media converter, regardless of protocol, can slide into the same chassis and provide managed media conversion ...