Splitter Networking Products

Description:

Use CtG's DB25 all-lines switch boxes to share connections between serial or parallel devices. They are ideal for use in print sharing applications not involving laser printers. The all-lines construction ensures these boxes can be used in serial or parallel applications.

Description:

TRIPPLITE B114-002-R Video Splitter 350 MHz;Allows for distances up to 210 ft;Simultaneously display 1 video presentation on 2 separate VGA/SVGA monitors;2 standard SVGA/VGA HD15 female ports are used to connect the monitors, while the HD15 male port is used to connect the splitter to the CPU; Lifetime warranty Video Splitter

Description:

The Video Splitter is a signal booster and splitter that is used to take video input from a single source and direct it to four video outputs for monitors using analog signals. The signal boost obtained by using the GVS94 allows you to not only split the signal but to extend the distance so that you can send the signal to about 215 feet away. This is no small feat, your average VGA card, over a standard VGA cable, sends a clear VGA signal approximately 25 feet. Dividing this between other displays reduces the video quality. This is why IOGEAR's video splitters are the best choice for allowing you to carry and split the video signal to more that one display with the same quality as the original signal. Bandwidth is the term that is used to describe the signal capacity of these units. In general, bandwidth is directly proportional to the amount of data transmitted per unit of time. Specifically, in analog signals, bandwidth is the difference between the highest-frequency and the lowest frequency components of a givin signal. For example a voice telephone signal has a bandwidth of 3000 Hz (or 3000 cycles per second), where an analog TV signal has a bandwidth of approximately 6MHz (or 6 million cycles per second) which is approximately 2000 times greater than a simple voice phone call. These units have a bandwidth of 250MHz (which is 250 million cycles per second) and that is 40 times greater than a simple TV signal. The high bandwidth allows for the transmission of large amounts of information at a very high rate of speed, thus allowing for the use of high resolution settings upwards of 1920 x 1440 in 24 or 32 bit true color mode.

Description:

This Dual Input VGA Matrix Splitter not only provides optimal convenience and control, but also exceptional video quality on multiple monitor configurations. This 2 port VGA Matrix Video Splitter allows you to input two distinct video signals that can be switched for viewing on either or both of the two connected monitors at the push of a button. Plus, multiple VGA Matrix video splitters can be connected together (cascaded), allowing you to quickly switch between up to eight displays. The VGA Matrix splitter is broadly compatible with industry video standards, including VGA, SVGA, XGA and multisync monitors, and provides exceptional video.

Description:

Break the limits of SVGA with a Port Authority2 VSE from Cables To Go. Simultaneously distribute any video signal to up to 8 different video outputs, while maintaining vivid picture quality. The VSE is powerful, yet easy to use. Connect the cables, and you're ready to go! There is no software or complicated interface cards to install. The VSE not only distributes, but also boosts your high-resolution video signal up to 210 feet. Available with two, four and eight ports, the VSE is perfect for classrooms, exhibits, trade shows, monitor testing, demonstrations and multi-media presentations. The VSE is also ideal for broadcasting video information such as news headlines, stock prices, airline flights and train schedules.

Description:

StarTech 4-to-1 SVGA Hi-Resolution Video Splitter allows one computer to provide simultaneous displays for up to 4 different monitors, works with VGA, SVGA and Multisync monitors High video bandwidth (350 Mhz) provides crystal clear 1600x1200 resolution. The device is daisy chainable for almost unlimited expansion. Built-in video amplifier boosts the signal to allow a cable length of up to 210 ft or 65m. StarTech 4-to-1 SVGA Video Splitter is ideal for public broadcast systems, demos, multimedia, education, merchandising.

Description:

The StarTech.com VideoView Pro is a High-End 8 port VGA Video Splitter that allows a PC to display to as many as 8 monitors simultaneously. It is perfect for presentations, classrooms, tradeshows, or in-store displays where the highest quality video on several monitors is needed. The VideoView Pro supports monitors with up to 300MHz of bandwidth allowing it to display images of 1920 x 1440 pixels or higher. A built-in booster circuit allows the video signal to be extended up to 200 ft.

Description:

The Belkin OmniView ExpandView Series Video Splitter (the Video Splitter) duplicates your video output, boosting its signal from one video port to multiple monitors. A great solution for trade shows, computer labs, large conferences, student teacher seminars, and stores, the 4-Port Video Splitter can display a video or image on up to four monitors from a single unit, and on up to 16 through daisy-chaining. Monitors connected to the ExpandView Series Video Splitter can be extended as far as 65 meters (213 feet).Setting up multiple monitors has never been easier. Simply connect your computer's VGA output to the Video Splitter's input port. Connect each monitor to the Video Splitter's output ports directly, or through extension cables, and you're done. It's that simple. The best way to reach your entire audience, the ExpandView Series provides you with the most cost-effective, video-expansion solution.

Description:

With Tripp Lite's 2-Port DVI Splitter, you can display the same image from one computer on two DVI enabled monitors. Use either in short distance applications, or, long distance runs, where the splitter is located, i.e., at the end of Tripp Lites P560-100, 100ft DVI cable, and split out to the monitors. Splitter provides 8db boost to the DVI signal coming over the 100ft cable, and fully regenerates for the last few feet to the displays. Multiple units may be daisy-chained to accommodate additional monitors.

Description:

Video splitter - 2 ports

Description:

16 Port

Description:

This 4 Port VGA over Cat5 video extender/splitter allows up to 5 (1 local and 4 remote) monitors to be connected to a single VGA source. The video signal is sent to remote monitors over standard 4 pair Category 5 UTP cable using RJ45 connectors and supports distances of up to 300m / 950ft. At each remote monitor an STUTPRXL receiver is required to convert the signal from the UTP cable back into VGA video for the monitor.ack into VGA video for the monitor.Allow Converge A/V to provide you with digital signage solutions. Applications include airports, bus depots, retail, or any large buildings where video needs to be delivered at long distances.

Description:

The Video Separator is a signal booster and splitter that is used to take video input from a single source and direct it to two video outputs for monitors using analog signals. The signal boost obtained by using the VS92A allows you to not only split the signal but to extend the distance so that you can send the signal to about 210 feet. (Your average VGA card, combined with a standard VGA cable, can send a clear VGA signal approximately 25 feet.) This makes public broadcasts from a single computer very feasible. If you want to display the same information on many monitors at once, such as in a classroom environment, or at a demonstration, this product performs incredibly well.Bandwidth is the term that is used to describe the signal capacity of these units. In general, bandwidth is directly proportional to the amount of data transmitted per unit of time. Specifically, in analog signals, bandwidth is the difference between the highest-frequency and the lowest frequency components of a signal. For example a voice telephone signal has a bandwidth of 3000 Hz (or 3000 cycles per second), where an analog TV signal has a bandwidth of approximately 6MHz (or 6 million cycles per second) which is approximately 2000 times greater than a simple voice phone call. These units have a bandwidth of 250MHz (which is 250 million cycles per second) and that over 40 times greater than a simple TV signal. This huge bandwidth allows for the transmission of large amounts of information at a very high rate of speed, and thus you can use the very high-resolution setting of 1920 x 1440 in 24 or 32-bit true color mode.

Description:

Tripp Lite switches feature the highest-quality components to ensure the reliability of your communications. When you install switches and institute sharing across your network, you save money by reducing the number of printers, servers and other peripherals that need to be deployed.VGA/SVGA Video Splitter simultaneously displays one video presentation on up to 4 separate VGA/SVGA monitors. It is ideal for video presentations in sales or training applications.

Description:

This 2x4 VGA Matrix Switcher/Splitter allows users to share two separate VGA input signals (as well as corresponding audio source signals) between up to four monitors.Providing convenient push button control, the VGA Matrix Switcher/Splitter allows both of the VGA input signals to be switched/split for display on any of the connected VGA displays (up to four) - in turn, ensuring centralized control of the VGA signal output destination at the push of a button.To ensure optimized VGA distribution and signal management even over longer distance signal transmissions, the VGA Matrix Switcher/Splitter features a built-in signal booster that facilitates installation of displays at distances of up to 210ft away from the source computer, while maintaining flawless signal integrity. The switcher/splitter offers high video bandwidth (250 Mhz) capability, providing display resolutions of up to 1920 x 1440 pixels features.Designed to provide maximum control while saving space and eliminating clutter, this VGA Matrix splitter/switcher can be used as a standalone solution or rackmounted using the (included) ear-mounts.

Description:

Share two video signals between multiple monitors. This matrix splitter lets you split the signals from two computers between up to eight VGA monitors or projectors. With the push of a button, the ST228MX lets you select and control which signal is displayed on each screen. A built-in signal booster lets you place your displays up to 210 feet away from your computer while maintaining high-quality VGA resolution. Easy install and set-up provides the perfect solution for permanent and mobile presentations.

Description:

The 3Com Baseline Switch 2126-G is an unmanaged, fixed configuration Layer 2 Switch with 24 10/100 ports and two copper 10/100/1000 uplinks, designed for small to midsize offices. This rack mountable, business-class switch can be installed in a wiring closet or as a free-standing unit.The switch comes preconfigured for fast, easy installation using economical copper wiring. Auto-negotiation adjusts the port speed to match the communicating device. To simplify cable connections, all 26 ports come with automatic detection of the Ethernet cable type (MDI/MDIX).Like all 3Com Baseline products, this switch provides powerful practicality in a sturdy package designed for reliability, long life, and low total cost of ownership.

Description:

The Video Splitter is a signal booster and splitter that is used to take video input from a single source and direct it to two video outputs for monitors using digital/ analog DVI signals. The signal boost obtained by using the GVS162W6 allows you to not only split the signal but to extend the distance so that you can send the signal to about 215 feet away. This is no small feat, your average DVI card, over a standard DVI cable, sends a clear DVI signal approximately 25 feet. Dividing this between other displays reduces the video quality. This is why IOGEAR's video splitters are the best choice for allowing you to carry and split the video signal to more that one display with the same quality as the original signal. Bandwidth is the term that is used to describe the signal capacity of these units. In general, bandwidth is directly proportional to the amount of data transmitted per unit of time. These units have a bandwidth of 300MHz (which is 300 million cycles per second) and that is50 times greater than a simple TV signal. The high bandwidth allows for the transmission of large amounts of information at a very high rate of speed, thus allowing for the use of high-resolution settings upwards of 1600x1200 in 24 or 32 bit true color mode.

Description:

The Cisco POES5 5-Volt Power over Ethernet Splitter lets you put your Cisco Small Business IP Phones almost anywhere, by removing the requirement for a nearby power outlet. The POES5 sends power and voice over IP (VoIP) over one Category 5 cable to your Cisco phone. When it's time to add or relocate a phone, the POES5 can simplify your installation.The Cisco POES5 provides an 802.3af Power over Ethernet (PoE) port for connection to a PoE switch. The compact POES5 connects to the standard DC power input and RJ-45 Ethernet port on the Cisco IP phone (or other supported Cisco Small Business VoIP product) via two "split" cables. The POES5 can then be tucked away and concealed in the stand attached to the Cisco Small Business IP Phone.Simplify your installation and place your Cisco Small Business IP Phones, or any of the other supported Cisco Small Business VoIP products, in a preferred spot with the Cisco POES5 5-Volt Power over Ethernet Splitter.

Description:

TRENDnet s TPE-102S Power over Ethernet Splitter provides an innovative and cost effective solution to a variety of Ethernet devices such as VoIP phones or Wireless Access Points. Reduce costs by using existing CAT5 cable to deliver both power and data where power source is difficult to obtain

Description:

The VS-162 DVI Video Splitters duplicate and boost the signals from any two DVI video and audio sources to two DVI displays and audio outputs. They are ideal for situations such as broadcasting information to the public, classrooms, or power users. Both devices feature audio support and both devices can also be daisy chained for additional viewing.

Description:

The ConnectPRO VSE-105A is the premium quality video splitter. It features a higher video bandwidth than most splitters on the market, 400 MHz.

Description:

The ConnectPRO VSE-110 is the premium quality video splitter. It features a higher video bandwidth than most splitters on the market, 400 MHz.

Description:

Power Over Ethernet (POE) integrates data and power over standard Ethernet cabling. It is a way to supply reliable, uninterrupted power to network cameras in hard to access places using Category 5 cable. Power Over Ethernet technology saves the time and cost of installing separate power cabling and AC outlets for each network camera.The IPCAMPOESPLIT, POE Splitter connects to the DC Jack and RJ-45 port of the Network Camera. A Cat-5 cable runs from the POE Splitter to a POE Switch to a maximum of 100 meters. One IPCAMPOESPLIT is required per Network Camera.The IPCAMPOESPLIT will supply a 12V maximum 1A precision regulated output. 4XEM Power Over Ethernet adapters have built-in ESD/lightning protection to help in preventing equipment damage due to transients and also have proprietary sensing algorithms which detect an overload or short circuit condition and shut down the supply to prevent equipment damage.The IPCAMPOESPLIT is rated for operation at -10 to +60 deg C and up to 90% humidity, and will perform reliably in outdoor weatherproof enclosures.Using Power Over Ethernet will allow you to locate your power supply at a central location where it can be attached to an uninterruptible power supply (UPS). The IPCAMPOESPLIT will connect your Network Cameras to a Power Over Ethernet Switch like the EPOEMS12, 4XEM's 12 port Power Over Ethernet MidSpan Switch.

Description:

Dell DVI-I M1-DA to 2x VGA Video Splitter Cable, 05E911 Use this splitter cable to split the video signal from your DVI M1-DA video output to two separate VGA monitors. 

Description:

The HSP0102 is a tow outputs HDMI splitter. It distributes the HDMI input into tow identical outputs.These tow outputs are synchronized. Series connection of HSP0102 achieves long distance transmission of HDMI signal of more than 15 meters.

Description:

The IDEAL OmniSeal compression tool 30793 meets the demands of any installation for the home theater, CATV, satellite system, and security application due to its universal product design.

Description:

These RJ45 Splitters allow you to double your network connections all from one network jack

Description:

The PD-AS-701 Splitter Series enable the addition of PowerDsine high power capability to devices which are not PoE compliant.

Description:

The PD-AS-701 Splitter Series enable the addition of PowerDsine high power capability to devices which are not PoE compliant.