Home > Computers & Software > Networking Products > transition media

Transition media Networking Products

you're in Networking Products, see other matches in:

Advertisement
Advertisement
sort by:
add tax & shipping for
 
 
Transition Networks Just Convert It Media Converter
 

Transition Networks Just Convert It Medi...

starting at

$78
  • product
Transition Networks Just Convert It Media Converter
10Base-T, 10Base-2 (coax) - BNC - RJ-45 - external - up to 610 ft

starting at

$78
Transition Networks Media Converter
 

Transition Networks Media Converter

starting at

$483
  • product
Transition Networks Media Converter
When used in conjunction with a managed Point System chassis, this stand-alone unit can be managed remotely. The Remotely Managed T1/E1 copper to fiber media converter will provide a solution for users who desire to extend their T1 or E1 circuits over fiber and remotely manage them "in-band" from admin locations.

starting at

$483
Transition Networks Point System Slide-In-Module Media Converter
 

Transition Networks Point System Slide-I...

starting at

$513
  • product
Transition Networks Point System Slide-In-Module Media Converter
Point System Slide-In-Module media converter is designed to be used in any of the Point System chassis. Each Point System Slide-In-Module media converter, regardless of protocol, can slide into the same chassis and provide managed media conversion services to suit a custom network application.

starting at

$513
Transition Networks Hub Switch Router Transceiver Media Converter
 

Transition Networks Hub Switch Router Tr...

starting at

$220
  • product
Transition Networks Hub Switch Router Transceiver Media Converter
Transition Networks' 100BASE-TX to 100BASE-FX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.The Media Converter operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. The Media Converter also automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure.The converter will automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link. Pause is a component of Auto-negotiation and because auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without Transition Networks' converters. Enabling the Pause feature on the converters between two switches allows users to take advantage of this flow control feature on their equipment.

starting at

$220
Transition Networks Media Converter
 

Transition Networks Media Converter

starting at

$510
  • product
Transition Networks Media Converter
RJ-11 - SC multi-mode - plug-in module - up to 3 miles - 1300 nm

starting at

$510
Transition Networks Transceiver Media Converter
 

Transition Networks Transceiver Media Co...

starting at

$405
  • product
Transition Networks Transceiver Media Converter
Transition Networks' 100BASE-TX to 100BASE-FX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.The Media Converter operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. The Media Converter also automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure.The converter will automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link. Pause is a component of Auto-negotiation and because auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without Transition Networks' converters. Enabling the Pause feature on the converters between two switches allows users to take advantage of this flow control feature on their equipment.

starting at

$405
Transition Networks Media Converter
 

Transition Networks Media Converter

starting at

$220
  • product
Transition Networks Media Converter
Transition Networks' 100BASE-TX to 100BASE-FX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.The Media Converter operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. The Media Converter also automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure.The converter will automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link. Pause is a component of Auto-negotiation and because auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without Transition Networks' converters. Enabling the Pause feature on the converters between two switches allows users to take advantage of this flow control feature on their equipment.

starting at

$220
Transition Networks J/ FE-CF-04 Media Converter
 

Transition Networks J/ FE-CF-04 Media Co...

starting at

$136
  • product
Transition Networks J/ FE-CF-04 Media Converter
Convert 1000BASE-T ports over to 1000BASE-SX/LX on a port-by-port basis. Used individually or in pairs, this media converter can extend Gigabit Ethernet up to 2 km over multimode fiber or up to 65 km over single mode fiber.

starting at

$136
Transition Networks Transceiver Media Converter
 

Transition Networks Transceiver Media Co...

starting at

$973
  • product
Transition Networks Transceiver Media Converter
Transition Networks offers networking connectivity solutions that make the conversion between disparate media types possible. The company designs and markets these media conversion technologies across a broad spectrum of networking protocols including Ethernet, Fast Ethernet, FDDI, ATM, Gigabit and Token Ring.

starting at

$973
Transition Networks Just Convert-IT J/FE-CF-04-LA Media Converter
 

Transition Networks Just Convert-IT J/FE...

starting at

$80
  • product
Transition Networks Just Convert-IT J/FE-CF-04-LA Media Converter
Convert 1000BASE-T ports over to 1000BASE-SX/LX on a port-by-port basis. Used individually or in pairs, this media converter can extend Gigabit Ethernet up to 2 km over multimode fiber or up to 65 km over single mode fiber.

starting at

$80
Transition Networks Media Converter
 

Transition Networks Media Converter

starting at

$138
  • product
Transition Networks Media Converter
Transition Networks SSETF10xx-205 series Ethernet and Fast Ethernet Media Converters connect 10Base-TX or 100Base-TX shielded or unshielded twisted-pair copper cable to 10Base-SX or 100Base-SX fiber-optic cable.

starting at

$138
Transition Networks Media Converter
 

Transition Networks Media Converter

starting at

$386
  • product
Transition Networks Media Converter
1000Base-SX, 1000Base-T - RJ-45 - SC multi-mode - plug-in module - up to 1800 ft - 850 nm

starting at

$386
Transition Media Converter
 

Transition Media Converter

starting at

$169
  • product
Transition Media Converter
Transition's AC powered PoE media converters combine data received over a fiber optic link with -48VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af: 2003 standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input.The PoE converter is fully compatible with devices that comply with the IEEE 802.3af standard. The PoE converter is capable of inserting power on data pairs of the MDI.

starting at

$169
Transition Networks SGFEB1013-120 Media Converter
 

Transition Networks SGFEB1013-120 Media ...

starting at

$547
  • product
Transition Networks SGFEB1013-120 Media Converter
PRODUCT FEATURES:Extend network distanceBridge legacy 10/100 devices to a Gigabit backboneAuto-negotiation (copper and fiber ports)Switch selectable speeds (UTP) when auto-negotiation is offAutoCrossLink pass throughRemote fault detectPause

starting at

$547
Transition Networks Media Converter
 

Transition Networks Media Converter

starting at

$214
  • product
Transition Networks Media Converter
Ethernet, Fast Ethernet Connection

starting at

$214
Transition Networks Media Converter
 

Transition Networks Media Converter

starting at

$483
  • product
Transition Networks Media Converter
The T1/E1 Copper to Fiber Media Converter enables the deployment of fiber into campus or industrial environments. This deployment of fiber into these environments provides a cost-effective solution and allows for the standardization on fiber as a media type. This is especially significant in industrial environments where fiber is immune to electrostatic interference "noise".

starting at

$483
Transition Networks SGFEB1014-120 Media Converter
 

Transition Networks SGFEB1014-120 Media ...

starting at

$779
  • product
Transition Networks SGFEB1014-120 Media Converter
10/100/1000BASE-T to 1000BASE-SX/LX 10/100/1000 media converter that converts the electrical signal of a 10/100/1000 Ethernet signal from copper to fiber. This solution will offer a low-cost integration option for network managers who want to migrate from 10/100 networks to Gigabit Ethernet. Gigabit only switches can now be connected to 10/100 networks without the need to upgrade the 10/100 side, allowing network managers to add new equipment gradually.

starting at

$779
Best prices on Transition media in Networking Products. Check out BizRate for great deals on Networking Products from Transition Networks, MiLAN Technology and Omnitron Systems. Use BizRate's latest online shopping features to compare prices for Transition media. Read product specifications, calculate tax and shipping charges, sort your results, and buy Computers & Software with confidence. Easily narrow your search and find the product that's perfect for you: Transition Networks Just Convert It Media Converter - Transition Networks Media Converter.