Adtran dual NIC

you're in NIC, see other matches in:

Advertisement
Advertisement
sort by:
view as:      
add tax & shipping for
 
 
 

starting at

$293
  • product
Applications involving 2- or 4-wire E&M tie lines are supported in the TSU Multiplexer with the E&M modules. In addition to supporting Type I, II and V E&M signaling, the E&M modules support legacy leased line modems in Transmit Only (TO) mode. Each dual port plug-in and dual port plug-on module supports the 2713 Hz loop back tone. The module installs in the expansion slot of the TSU Multiplexer to provide RJ interface connectivity to the KSU, PBX, switch or leased line analog modem.

starting at

$293
 

starting at

$250
  • product
The 2FXO module is one of several expansion modules for the TSU Multiplexer family. This module should be selected when a connection to one or two voice line cards of a key system or PBX is required. PBX extensions may be extended to a remote site by combining a TSU on the remote end with FXS modules. The module emulates the CO side of a DID (Direct Inward Dial) trunk when in DPT mode. The module provides standard 2FXO or DPT functionality to distances of 2400 feet. The module installs in the slot(s) of the TSU Multiplexer.

starting at

$250
 

starting at

$258
  • product
Applications involving 2- or 4-wire E&M tie lines are supported in the TSU Multiplexer with the E&M modules. In addition to supporting Type I, II and V E&M signaling, the E&M modules support legacy leased line modems in Transmit Only (TO) mode. Each dual port plug-in and dual port plug-on module supports the 2713 Hz loop back tone. The module installs in the expansion slot of the TSU Multiplexer to provide RJ interface connectivity to the KSU, PBX, switch or leased line analog modem.

starting at

$258
 

starting at

$175
  • product
The ADTRAN Dual OCU DP Module is an expansion module for the TSU Multiplexer family. Designed to provide full OCU DP operation for office applications, the module can be used to extend 64k DDS, Switched 56 or Frame Relay circuits up to 18, 000 feet from the multiplexer. The Dual OCU DP expansion module and the Dual OCU DP Plug-On module now expand the capacity of the TSU multiplexer family to support four OCU DP interfaces per expansion slot. For CPE applications, the Dual OCU DP module allows network administrators to cut network access charges and continue to support traditional DDS/SW56 requirements. By re-using existing CPE products such as the DSU III AR, the Dual OCU DP module can extend two switched 56 circuits to a conference room to support video-conferencing. The module can also be used to extend a 56k Frame Relay circuit to FSU located in a computer room. The flexibility of the TSU Multiplexer family allows Dual OCU DP operation with any of the existing modules for voice, data or routing. The Dual OCU DP module is ideal for extending DSOs assigned over a service consolidating T1 circuit from a central access point. CLECs, LECs and IXCs can now use the TSU 600e Multiplexer to consolidate multiple clients' 56/64k-based services and maintain individual customer access. The TSU 600e, with the addition of the Dual OCU DP, can now support 24 individual OCU DP interfaces. The module is fully compliant with AT&T 62310 and 41458, allowing ease of integration and interoperability with existing OCU DP and end user CPE solutions. For testing and troubleshooting, the Dual OCU DP module contains many built-in test functions. Several test codes are supported, including channel, OCU and DSU loop-backs. Alternating and latching loop-backs are also embedded in the module. Additionally, the TSU Multiplexer family includes a full complement of test functions that allow testing of the OCU DP module, the T1 carrier and the multiplexer itself.

starting at

$175
 

starting at

$185
  • product
The TSU Multiplexer FXS+ option modules provides four 2-wire interfaces that can operate in the PLAR, Tandem (MEGACOM), or FXS mode. The available modules provide 2- and 4-port voice interfaces that supply line current to station equipment. The original FXS+ modules support message waiting and higher ringing voltages.

starting at

$185
 

starting at

$250
  • product
The 2FXO module is one of several expansion modules for the TSU Multiplexer family. This module should be selected when a connection to one or two voice line cards of a key system or PBX is required. PBX extensions may be extended to a remote site by combining a TSU on the remote end with FXS modules. The module emulates the CO side of a DID (Direct Inward Dial) trunk when in DPT mode. The module provides standard 2FXO or DPT functionality to distances of 2400 feet. The module installs in the slot(s) of the TSU Multiplexer.

starting at

$250
 
store rating:
  • product
We have the following Adtran 1175201L1 for sale!! -ADTRAN 1175201 L1 Total Access 750 Dual Chassis Teldeal can be your one stop shop for all your central office and transmission needs!! Feel free to inquire about other part numbers or more of these at...
at
 
store rating:
  • product
The NetVanta 150 Dual Radio Wireless Access Point provides concurrent 802.11b/g and 802.11a radio support at speeds up to 54Mbps, this business-class Access Point is perfect for the corporate environment needing a secure, integrated WLAN solution. The...
 

starting at

$750
  • product
Sku: 4200754L4

starting at

$750
 
store rating:
  • product
The NetVanta 150 Dual Radio Wireless Access Point provides concurrent 802.11b/g and 802.11a radio support at speeds up to 54Mbps, this business-class Access Point is perfect for the corporate environment needing a secure, integrated WLAN solution. The...
 

starting at

$277
  • product
The Dual Nx56/64 module combines with other ATLAS 550 components to provide solutions for a variety of wide area networking applications. Providing two synchronous V.35 DTE ports, the Dual Nx56/64 module serves as the interface for high speed routers and other DTE equipment to access the wide area network.Each port of the Dual Nx56/64 module can be configured through software to operate at any multiple of 56k or 64 kbps, up to 2.048 Mbps. Using the ATLAS Channel Mapping Utility, a port can be mapped to one or more DSOs of a T1 circuit, providing high performance connections to remote locations. The Dual Nx56/64 module includes an extensive array of diagnostic tools, to assist in identifying and correcting network problems. Included is a built-in Self-Test utility, as well as standards-based 511 test pattern generators and detectors for both ports. Key interface signals from each port is monitored and displayed, providing real time status of network activity.

starting at

$277
 
  • product
ADTRAN solutions maximize performance, lower costs, and help companies achieve the best return on investment. ADTRAN is committed to achieving success for customers by offering "best-in-class" products with outstanding value. Let ADTRAN work for...
at
 
  • product
The Atlas 830 Dual Video Module is the newest addition to the Atlas video switching option modules designed to support videoconferencing applications. The Dual Video Module provides two sets of RS-366 interfaces and synchronous DTE ports to add inverse...
at
You'll find the best prices on Adtran dual in NIC when you shop online at bizrate. Do all your comparison shopping for Adtran NIC in one place. Compare models and see which online Computers & Software stores have the best merchant ratings. Make an informed decision on Adtran dual NIC before you buy. bizrate will help you with all of your holiday gift shopping needs. Buy Adtran 1200106L3 Voice interface card or Adtran 4200773L3 Network adapter.