Home > Computers & Software > NIC > atm devices

Atm devices NIC

you're in NIC, see other matches in:

Advertisement
Advertisement
sort by:
view as:      
add tax & shipping for
 
 
Cisco PA-A3-OC3MM Network adapter
 

Cisco PA-A3-OC3MM Network adapter

starting at

$30
  • product
Cisco PA-A3-OC3MM Network adapter
Cisco offers a variety of connectivity, expansion and upgrade modules and cards to meet the customer specific needs. These components are easily and inexpensively upgraded as customer requirements change.

starting at

$30
Cisco NM-4T1-IMA= Expansion module
 

Cisco NM-4T1-IMA= Expansion module

starting at

$44
  • product
Cisco NM-4T1-IMA= Expansion module
Cisco offers a variety of connectivity, expansion and upgrade options to accommodate the customer specific needs. Cisco's components are easily and inexpensively upgradeable as customer requirements change.

starting at

$44
Cisco NM-8T1-IMA= Expansion module
 

Cisco NM-8T1-IMA= Expansion module

starting at

$120
  • product
Cisco NM-8T1-IMA= Expansion module
Cisco offers a wide variety of connectivity, expansion and upgrade options to accommodate the range of application needs in customer networks. The network modules assure customers that they can choose a connectivity solution that fits their requirements. They are easily and inexpensively upgradeable as customer requirements change.

starting at

$120
Cisco PA-A3-OC3SMI Network adapter
 

Cisco PA-A3-OC3SMI Network adapter

starting at

$270
  • product
Cisco PA-A3-OC3SMI Network adapter
The PA-A3-OC3SMM, PA-A3-OC3SMI, and PA-A3-OC3SML are designed to provide maximum switching performance when a single port adapter is installed in a single VIP2-50. A single PA-A3-OC3SMM, PA-A3-OC3SMI, or PA-A3-OC3SML in a VIP2-50 provides up to approximately 85, 000 packets per second of switching capacity in each direction using 64-byte packets.

starting at

$270
Cisco NM-1A-OC3MM Expansion module
 

Cisco NM-1A-OC3MM Expansion module

starting at

$99
  • product
Cisco NM-1A-OC3MM Expansion module
Three new 155 Mbps ATM OC-3 network modules are available for the 3600 series with Cisco IOS release 12.0(3)T. These network modules support STS-3c and STM-1 framing standards over Multimode, Singlemode Intermediate reach, or Singlemode Long reach fiber optic interfaces. All three versions consist of a single-port network module with SC connector types that support ATM Forum standard AAL5 for data only traffic. Voice-over-IP (VoIP) and H.323 over ATM can also be supported with VBR-rt Class of Service using SVC`s with the currently available analog Voice/Fax network modules and Voice Interface Cards.The OC-3 ATM network modules are only supported on the 3600 Series. 12.0(3)T or above Cisco IOS Plus feature sets are required to support the ATM network modules. A maximum of one ATM OC-3 network module is recommended on the 3660, 3640, or 3620. There are no additional Flash or DRAM memory requirements, other then minimum memory requirements specified for the Cisco IOS 12.0(3)T Plus feature sets. The ATM OC-3 network modules are ideal for connecting directly to ATM fiber Wide Area Network (WAN) at large remote Branch office sites to a central site via public or privately owned ATM WAN; or to provide LAN connectivity to a co-located Cisco ATM Switch. Voice over IP (VoIP) over ATM applications can be supported with VBR-rt Class of Service using SVCs and the currently available Voice/Fax network modules and Voice Interface Cards. Support is also provided for other advanced ATM Layer 2 features such as IETF PPP over ATM, Tag Switching, Multiprotocol over ATM (MPOA), and NHRP enhancing ATM performance for Enterprise and Service Providers alike.This is a single port ATM OC-3 Multimode network module.

starting at

$99
Cisco NM-1A-T3= Expansion module
 

Cisco NM-1A-T3= Expansion module

starting at

$130
  • product
Cisco NM-1A-T3= Expansion module
Cisco offers a variety of connectivity, expansion and upgrade options to accommodate the customer specific needs. Cisco's components are easily and inexpensively upgradeable as customer requirements change.

starting at

$130
Cisco NM-1A-OC3SMI= Expansion module
 

Cisco NM-1A-OC3SMI= Expansion module

starting at

$223
  • product
Cisco NM-1A-OC3SMI= Expansion module
Cisco offers a variety of connectivity, expansion and upgrade options to accommodate the customer specific needs. Cisco's components are easily and inexpensively upgradeable as customer requirements change.

starting at

$223
Sun SunFastEthernet Network adapter
 

Sun SunFastEthernet Network adapter

starting at

$65
  • product
Sun SunFastEthernet Network adapter
Ever since the concept of higher speed Ethernet emerged, Sun has contributed significant efforts toward the development of the standard, promotion of industry cooperation/product interoperability, and evangelized the merits of the higher speed Ethernet technologies.Sun Microsystems is a leader in high speed Ethernet. Industry firsts include a dual-speed 10/100 Mbps adapter and a 10/100 Fast Ethernet, Fast/Wide SCSI-2 adapter to meet the needs of customers who require a simple and cost-effective migration to higher bandwidth.This adapter fits all systems with Sbus.

starting at

$65
Cisco PA-A3-E3= Expansion module
 

Cisco PA-A3-E3= Expansion module

starting at

$124
  • product
Cisco PA-A3-E3= Expansion module
The PA-A3 port adapter is a generation of single-width, single-port, ATM, Peripheral Component Interconnect (PCI)-based port adapters. The PA-A3 is supported in the Catalyst RSM/VIP2, Cisco 7100 series, Cisco 7200 series, and Cisco uBR7200 series routers, and the VIP2 and VIP4 in Cisco 7000 series and Cisco 7500 series routers.

starting at

$124
Cisco WS-X6101-OC12-MMF Expansion module
 

Cisco WS-X6101-OC12-MMF Expansion module

starting at

$186
  • product
Cisco WS-X6101-OC12-MMF Expansion module
The single-port ATM module provides one direct connection and one standby connection between the ATM network and the switch using two multimode, SC-type fiber-optic connectors.The console port allows you to access the switch either locally (with a console terminal) or remotely (with a modem). The console port is an EIA/TIA-232 asynchronous, serial connection with hardware flow control and an RJ-45 connector. The console port mode switch allows you to select between either attaching a terminal or a modem to the console port.

starting at

$186
Cisco PA-E3= Network adapter Expansion module
 

Cisco PA-E3= Network adapter Expansion m...

starting at

$220
  • product
Cisco PA-E3= Network adapter Expansion module
This port adapter provides one high-speed, full-duplex, synchronous serial E3 interface and integrated data service unit (DSU) functionality. The E3 port adapters can transmit and receive data at E3 rates of up to 34 Mbps and use a 75-ohm coaxial cable available from Cisco to connect to a serial E3 network. These port adapters support the following: 16- and 32-bit cyclic redundancy checks (CRC), high-speed HDLC data, G.751 framing or bypass, HDB3 line coding, ATM-DXI, Frame Relay, HDLC, PPP, and SMDS serial encapsulation, national service bits, E3 MIB (RFC 1407), scrambling and reduced bandwidth, remote and local loopbacks.The PA-E3 port adapter supports the RFC 1407 DS3 Near End Group, including DS3/E3 Configuration Table, DS3/E3 Current Table, DS3/E3 Interval Table, DS3/E3 Total Table.The PA-E3 port adapter also supports the Card Table in the Cisco Chassis MIB and the MIB-2 for each PA-E3 interface. The PA-E3 port adapter does not support the RFC 1407 DS3 Far End Group and DS3/E3 Fractional Group.

starting at

$220
Cisco PA-A3-8T1IMA= Network adapter
 

Cisco PA-A3-8T1IMA= Network adapter

starting at

$320
  • product
Cisco PA-A3-8T1IMA= Network adapter
Inverse multiplexing over ATM (IMA) port adapters for the Cisco 7200 and 7500 series routers offer a cost-effective solution to increase bandwidth and extend multiservice capabilities to regional offices and large branches with ATM. By aggregating T1 or E1 communications links using standards-based IMA, service providers and enterprise customers can now take advantage of greater bandwidth flexibility as well as the advanced quality-of-service (QoS) features available with an ATM WAN infrastructure.IMA is an ATM Forum specification that provides a cost-effective and scalable alternative to T3/E3 services by offering service providers and enterprise customers the ability to leverage widely available T1 services over ATM, and interoperate with other vendors' standards-based equipment. Multiport T1/E1 IMA can provide organizations with highly desired fractional T3/E3 bandwidth connectivity so critical in situations where DS3 or OC-3 fiber communications links are either cost prohibitive or unavailable.

starting at

$320
Cisco 4OC12E/POS-MM-SC Expansion module
 

Cisco 4OC12E/POS-MM-SC Expansion module

starting at

$780
  • product
Cisco 4OC12E/POS-MM-SC Expansion module
Cisco offers a wide variety of connectivity, expansion and upgrade options to accommodate the range of application needs in customer networks. The network modules assure customers that they can choose a connectivity solution that fits their requirements. They are easily and inexpensively upgradeable as customer requirements change.

starting at

$780
Cisco WAI-OC3-4SS= Expansion module
 

Cisco WAI-OC3-4SS= Expansion module

starting at

$1,299
  • product
Cisco WAI-OC3-4SS= Expansion module
Cisco offers a wide variety of connectivity, expansion and upgrade options to accommodate the range of application needs in customer networks. The network modules assure customers that they can choose a connectivity solution that fits their requirements. They are easily and inexpensively upgradeable as customer requirements change.

starting at

$1,299
Cisco NM-1ATM-25 Expansion module
 

Cisco NM-1ATM-25 Expansion module

starting at

$167
  • product
Cisco NM-1ATM-25 Expansion module
The Cisco 3600 platform with the new ATM 25 Network Module offers high-performance branch office access. The Network Module is designed primarily to allow branch office to take advantage of new high-speed leading edge ADSL connection technology. The Network Module can also function as part of an ATM 25 network environment. This network module, part of Cisco's broad portfolio of CPE and CO DSL products, compliments the current range of over 30 network modules now available for the Cisco 3600 series. The 25.6-Mbps ATM NM is ideal for the termination of cost-effective ADSL connections. Managers can cost- effectively deploy ATM all the way to the 3600, allowing for support of applications on the branch office LAN such as videoconferencing, videosurveillance, distance learning, Voice over data, or videobroadcast applications.

starting at

$167
Cisco NM-1A-T3 Expansion module
 

Cisco NM-1A-T3 Expansion module

starting at

$3,750
  • product
Cisco NM-1A-T3 Expansion module
Network modules enable the Cisco 2600 Series to be customized to meet the needs of virtually any branch office. These modules support a broad range of applications, including multiservice voice/data integration, analog and ISDN dial access, and serial device concentration or ATM access. The Cisco 2600 Series share network modules with the higher performance Cisco 3600 Series and supports the more than 30 network modules.

starting at

$3,750
Cisco NM-8E1-IMA Expansion module
 

Cisco NM-8E1-IMA Expansion module

starting at

$4,020
  • product
Cisco NM-8E1-IMA Expansion module
Cisco offers a variety of connectivity, expansion and upgrade options to accommodate the customer specific needs. Cisco's components are easily and inexpensively upgradeable as customer requirements change.

starting at

$4,020
You'll find the best prices on Atm devices in NIC when you shop online at bizrate. Do all your comparison shopping for Cisco, 3Com and Enterasys NIC in one place. Compare models and see which online Computers & Software stores have the best merchant ratings. Make an informed decision on Atm devices NIC before you buy. bizrate will help you with all of your holiday gift shopping needs. Buy Cisco PA-A3-OC3MM Network adapter or Cisco PA-A3-T3 Expansion module.