Home > Computers & Software > NIC > cable no

Cable no NIC

you're in NIC, see other matches in:

Advertisement
Advertisement
sort by:
view as:      
add tax & shipping for
 
 
Cisco WS-G5487= Expansion module
 

Cisco WS-G5487= Expansion module

starting at

$150
  • product
Cisco WS-G5487= Expansion module
The WS-G5487, 1000BaseZX operates on ordinary single mode fiber optic link spans of up to 70 km in length. Link spans of up to 100 km are possible using premium single mode fiber or dispersion shifted single mode fiber (premium single mode fiber has a lower attenuation per unit length than ordinary single mode fiber; dispersion shifted single mode fiber has both lower attenuation per unit length, and less dispersion).The WS-G5487 must be coupled to single mode fiber optic cable, which is the type of cable typically used in long haul telecommunications applications. The WS-G5487 will not operate correctly when coupled to multi-mode fiber, and it is not intended to be used in application environments (e.g. building backbones, horizontal cabling) where multi-mode fiber is frequently used.The WS-G5487 is intended to be used as a Physical Medium Dependent (PMD) component for Gigabit Ethernet interfaces, as found on various switch and router products. It will operate at a signaling rate of 1250 MBaud, transmitting and receiving 8B/10B-encoded data. When shorter distances of single mode fiber are used, it may be necessary to insert an in-line optical attenuator in the link, to avoid overloading the receiver. A 10 dB in-line optical attenuator should be inserted between the fiber optic cable plant and the receiving port on the WS-G5487 GBIC at each end of the link whenever the fiber optic cable span is less than 25 km. A 5 dB in-line optical attenuator should be inserted between the fiber optic cable plant and the receiving port on the WS-G5487 GBIC at each end of the link whenever the fiber optic cable span is equal to or greater than 25 km, and less than 50 km.

starting at

$150
3Com Megahertz 3CCFE574BT Wired Ethernet CardBus
 

3Com Megahertz 3CCFE574BT Wired Ethernet...

starting at

$11
  • product
3Com Megahertz 3CCFE574BT Wired Ethernet CardBus
The 3Com Megahertz 10/100 LAN PC Card provides fast 10 Mbps and 100 Mbps connections for notebook computers with 16-bit slots. Its Parallel Tasking technology delivers throughput up to 46 percent faster than LAN PC Cards without it.This powerful PCMCIA card boasts Full-Duplex Operation which increases your PC Card's throughput by simultaneously sending and receiving data, Hot Swapping and guaranteed compatibility with all notebook PCs that comply with The PC Card Standard. Installation is a snap with 3Com's Intelligent Auto Install. It configures your PC Card and network drivers in a matter of minutes.

starting at

$11
Digi International AccelePort Serial Adapter
 

Digi International AccelePort Serial Ada...

starting at

$574
  • product
Digi International AccelePort Serial Adapter
The AccelePort Xp was designed to further enhance multi-user (retail point-of-sale, industrial control processing, data collection and office automation) and Remote Access Service (RAS) implementations. The AccelePort Xp adapter, available from two to 16 high-speed serial ports, provides wide application flexibility and superior CPU utilization. This is achieved through the adapter's Application Specific Integrated Circuit (ASIC), which is built around an 80 Mhz RISC processor, providing the most advanced and highest performing design on the market today. And, unlike the competition, the AccelePort Xp communicates at 921.6 Kbps, bi-directionally, on each and every serial port with low latency.The AccelePort Xp comes in a wide array of DB-9, DB-25, and RJ-45 connector options that include fan-out cables, external I/O boxes, and rack-mountable chassis. These options connect to the adapter using a SCSI HD-68 connector, reducing cable clutter and increasing connection reliability. PortAssist Manager, Digi's new Web browser-based management and reporting software, is another great feature that allows the AccelePort Xp to perform basic diagnostics, enhanced network administration and monitoring across all supported operating systems. With the introduction of the AccelePort Xp, Digi has once again set a new standard in the asynchronous communications adapter market. Its excellent throughput, unrivaled feature set, high reliability, quality and ease of installation make this product an ideal solution for all your communication needs.

starting at

$574
Digi International AccelePort Serial Adapter
 

Digi International AccelePort Serial Ada...

starting at

$163
  • product
Digi International AccelePort Serial Adapter
Today's remote access and multiuser environments demand high-speed communications. Faster modems and servers can't do the job alone, they need to be connected to high-speed serial ports designed to keep pace with these higher-performing environments. That's why leading VARs and system integrators specify the Digi AccelePort Xr multiport serial adapters when they need intelligent boards that deliver the utmost in serial I/O performance. The AccelePort Xr 422 product line provides four- and eight-port EIA-422 solutions for transmitting data up to 230 Kbps over greater distances, ensuring complete reliability in harsh environments. When combined with Digi’s on-board firmware and driver software, the AccelePort Xr offers the most complete and powerful serial I/O solutions on the market today.

starting at

$163
Digi International ClassicBoard Serial Adapter
 

Digi International ClassicBoard Serial A...

starting at

$187
  • product
Digi International ClassicBoard Serial Adapter
Offering unparalleled speed, reliability and ease of installation, the Digi ClassicBoard family provides the ultimate in basic, non-intelligent serial communication technology making them a natural fit for a variety of applications.

starting at

$187
Digi International AccelePort Serial Adapter
 

Digi International AccelePort Serial Ada...

starting at

$445
  • product
Digi International AccelePort Serial Adapter
The AccelePort Xp was designed to further enhance multi-user (retail point-of-sale, industrial control processing, data collection and office automation) and Remote Access Service (RAS) implementations. The AccelePort Xp adapter, available from two to 16 high-speed serial ports, provides wide application flexibility and superior CPU utilization. This is achieved through the adapter's Application Specific Integrated Circuit (ASIC), which is built around an 80 Mhz RISC processor, providing the most advanced and highest performing design on the market today. And, unlike the competition, the AccelePort Xp communicates at 921.6 Kbps, bi-directionally, on each and every serial port with low latency.The AccelePort Xp comes in a wide array of DB-9, DB-25, and RJ-45 connector options that include fan-out cables, external I/O boxes, and rack-mountable chassis. These options connect to the adapter using a SCSI HD-68 connector, reducing cable clutter and increasing connection reliability. PortAssist Manager, Digi's new Web browser-based management and reporting software, is another great feature that allows the AccelePort Xp to perform basic diagnostics, enhanced network administration and monitoring across all supported operating systems. With the introduction of the AccelePort Xp, Digi has once again set a new standard in the asynchronous communications adapter market. Its excellent throughput, unrivaled feature set, high reliability, quality and ease of installation make this product an ideal solution for all your communication needs.

starting at

$445
Digi International AccelePort Serial Adapter
 

Digi International AccelePort Serial Ada...

starting at

$525
  • product
Digi International AccelePort Serial Adapter
The AccelePort Xp was designed to further enhance multi-user (retail point-of-sale, industrial control processing, data collection and office automation) and Remote Access Service (RAS) implementations. The AccelePort Xp adapter, available from two to 16 high-speed serial ports, provides wide application flexibility and superior CPU utilization. This is achieved through the adapter's Application Specific Integrated Circuit (ASIC), which is built around an 80 Mhz RISC processor, providing the most advanced and highest performing design on the market today. And, unlike the competition, the AccelePort Xp communicates at 921.6 Kbps, bi-directionally, on each and every serial port with low latency.The AccelePort Xp comes in a wide array of DB-9, DB-25, and RJ-45 connector options that include fan-out cables, external I/O boxes, and rack-mountable chassis. These options connect to the adapter using a SCSI HD-68 connector, reducing cable clutter and increasing connection reliability. PortAssist Manager, Digi's new Web browser-based management and reporting software, is another great feature that allows the AccelePort Xp to perform basic diagnostics, enhanced network administration and monitoring across all supported operating systems. With the introduction of the AccelePort Xp, Digi has once again set a new standard in the asynchronous communications adapter market. Its excellent throughput, unrivaled feature set, high reliability, quality and ease of installation make this product an ideal solution for all your communication needs.

starting at

$525
Digi International AccelePort Serial adapter
 

Digi International AccelePort Serial ada...

starting at

$611
  • product
Digi International AccelePort Serial adapter
Today's remote access and multiuser environments demand high-speed communications. Faster modems and servers can't do the job alone, they need to be connected to high-speed serial ports designed to keep pace with these higher-performing environments. That's why leading VARs and system integrators specify the Digi AccelePort Xr multiport serial adapters when they need intelligent boards that deliver the utmost in serial I/O performance. The AccelePort Xr offers two solutions. The AccelePort Xr 920 product line provides the highest-performing throughput, up to 921.6 Kbps in two-, four- and eight-port EIA-232 solutions. The AccelePort Xr 422 product line provides four- and eight-port EIA-422 solutions for transmitting data up to 230 Kbps over greater distances, ensuring complete reliability in harsh environments. When combined with Digi's on-board firmware and driver software, the AccelePort Xr offers the most complete and powerful serial I/O solutions on the market today.

starting at

$611
3Com EtherLink Network adapter
 

3Com EtherLink Network adapter

starting at

$13
  • product
3Com EtherLink Network adapter
3Com Megahertz 10 Mbps LAN PC Cards, formerly EtherLink III LAN PC Cards, deliver the highest network speeds available for your notebook PC. The Megahertz 10 Mbps PC Card delivers the fastest performance available for notebooks with 16-bit PC Card slots. They are easy to install and use and give you the most reliable 10 Mbps network connectivity available. And new 3Com Megahertz models combine the world s most popular 10 Mbps LAN PC Card, the EtherLink III PC Card, with XJACK LAN connector for easy connection to your network without the hassle of carrying or losing cables.

starting at

$13
Digi International AccelePort Serial Adapter
 

Digi International AccelePort Serial Ada...

starting at

$514
  • product
Digi International AccelePort Serial Adapter
The AccelePort Xp was designed to further enhance multi-user (retail point-of-sale, industrial control processing, data collection and office automation) and Remote Access Service (RAS) implementations. The AccelePort Xp adapter, available from two to 16 high-speed serial ports, provides wide application flexibility and superior CPU utilization. This is achieved through the adapter's Application Specific Integrated Circuit (ASIC), which is built around an 80 Mhz RISC processor, providing the most advanced and highest performing design on the market today. And, unlike the competition, the AccelePort Xp communicates at 921.6 Kbps, bi-directionally, on each and every serial port with low latency.The AccelePort Xp comes in a wide array of DB-9, DB-25, and RJ-45 connector options that include fan-out cables, external I/O boxes, and rack-mountable chassis. These options connect to the adapter using a SCSI HD-68 connector, reducing cable clutter and increasing connection reliability. PortAssist Manager, Digi's new Web browser-based management and reporting software, is another great feature that allows the AccelePort Xp to perform basic diagnostics, enhanced network administration and monitoring across all supported operating systems. With the introduction of the AccelePort Xp, Digi has once again set a new standard in the asynchronous communications adapter market. Its excellent throughput, unrivaled feature set, high reliability, quality and ease of installation make this product an ideal solution for all your communication needs.

starting at

$514
Digi International AccelePort Serial Adapter
 

Digi International AccelePort Serial Ada...

starting at

$179
  • product
Digi International AccelePort Serial Adapter
The AccelePort Xp was designed to further enhance multi-user (retail point-of-sale, industrial control processing, data collection and office automation) and Remote Access Service (RAS) implementations. The AccelePort Xp adapter, available from two to 16 high-speed serial ports, provides wide application flexibility and superior CPU utilization. This is achieved through the adapter's Application Specific Integrated Circuit (ASIC), which is built around an 80 Mhz RISC processor, providing the most advanced and highest performing design on the market today. And, unlike the competition, the AccelePort Xp communicates at 921.6 Kbps, bi-directionally, on each and every serial port with low latency.The AccelePort Xp comes in a wide array of DB-9, DB-25, and RJ-45 connector options that include fan-out cables, external I/O boxes, and rack-mountable chassis. These options connect to the adapter using a SCSI HD-68 connector, reducing cable clutter and increasing connection reliability. PortAssist Manager, Digi's new Web browser-based management and reporting software, is another great feature that allows the AccelePort Xp to perform basic diagnostics, enhanced network administration and monitoring across all supported operating systems. With the introduction of the AccelePort Xp, Digi has once again set a new standard in the asynchronous communications adapter market. Its excellent throughput, unrivaled feature set, high reliability, quality and ease of installation make this product an ideal solution for all your communication needs.

starting at

$179
Digi International ClassicBoard Serial Adapter
 

Digi International ClassicBoard Serial A...

starting at

$247
  • product
Digi International ClassicBoard Serial Adapter
Offering unparalleled speed, reliability and ease of installation, the Digi ClassicBoard family provides the ultimate in basic, non-intelligent serial communication technology making them a natural fit for a variety of applications.

starting at

$247
Digi International AccelePort Serial Adapter
 

Digi International AccelePort Serial Ada...

starting at

$456
  • product
Digi International AccelePort Serial Adapter
The AccelePort Xp was designed to further enhance multi-user (retail point-of-sale, industrial control processing, data collection and office automation) and Remote Access Service (RAS) implementations. The AccelePort Xp adapter, available from two to 16 high-speed serial ports, provides wide application flexibility and superior CPU utilization. This is achieved through the adapter's Application Specific Integrated Circuit (ASIC), which is built around an 80 Mhz RISC processor, providing the most advanced and highest performing design on the market today. And, unlike the competition, the AccelePort Xp communicates at 921.6 Kbps, bi-directionally, on each and every serial port with low latency.The AccelePort Xp comes in a wide array of DB-9, DB-25, and RJ-45 connector options that include fan-out cables, external I/O boxes, and rack-mountable chassis. These options connect to the adapter using a SCSI HD-68 connector, reducing cable clutter and increasing connection reliability. PortAssist Manager, Digi's new Web browser-based management and reporting software, is another great feature that allows the AccelePort Xp to perform basic diagnostics, enhanced network administration and monitoring across all supported operating systems. With the introduction of the AccelePort Xp, Digi has once again set a new standard in the asynchronous communications adapter market. Its excellent throughput, unrivaled feature set, high reliability, quality and ease of installation make this product an ideal solution for all your communication needs.

starting at

$456
Digi International AccelePort Serial adapter
 

Digi International AccelePort Serial ada...

starting at

$257
  • product
Digi International AccelePort Serial adapter
Designed to deliver fast, reliable connections for multiuser workgroups, the AccelePort Xe multiport serial adapter is a low-priced solution for supporting terminals, printers, modems and other asynchronous peripherals. Recommended for point-of-sale, data acquisition, factory automation, and industrial control applications, the AccelePort Xe is among Digi's most popular selling add-in solutions. Equipped with powerful on-board I/O processing to reduce host CPU utilization, and supplied with full modem control and hardware handshaking, the AccelePort Xe easily accommodates the varying connectivity needs of small to medium sized workgroups. For low-cost, accurate and dependable multiuser communications, the AccelePort Xe is among the smartest connection that you can make.

starting at

$257
IBM 85H3656 Network adapter
 

IBM 85H3656 Network adapter

starting at

$24
  • product
IBM 85H3656 Network adapter
Turbo 16/4 Token-Ring PCMCIA Card Adapter is small, lightweight and portable specially designed for mobile and desktop PCs with PCMCIA type II or III slots.Selectable speed of either 16 or 4Mbps makes it easy to change network data rates. Automatic ring speed detection prevents "wrong-speed" insertion into the ring even with manual speed selection. Optional automatic ring speed selection automatically sets the adapter ring speed to the actual ring speed, even when connected to speed sensing hub Card is activated only if cable is attached so the end user can leave card in the system when card is not in use. This eliminates misplaced cards and enhances system mobility. It supports a wide range of network operating systems. Variable I/O port addressing allows greater flexibility to move port addresses. Memory reduction technology conserves your notebook's valuable memory. RPL included standard enables centralized configuration management, improves security, makes network growth easier and results in potential cost savings by downloading applications and data to both media and medialess workstations. It also makes it easy to update, control and maintain consistent IPL across the LAN. Quick and easy installation is made possible with the provided installation program.

starting at

$24
Digi International
 

Digi International

starting at

$482
  • product
Digi International
The AccelePort Xem asynchronous concentrator is an expandable, modular and intelligent serial communication adapter designed specifically for small to mid-size installations. The Digi AccelePort Xem is optimized for configuring high performance multiuser systems and broad-based server solutions for remote access environments. If your business is looking to reap all the benefits of high-performance workgroup computing at the lowest price per port, look no further than the AccelePort Xem. This powerful system lets you connect high-speed EIA-232 or EIA-422 serial ports to a PCI or ISA based system. The result is a fast, reliable way to connect terminals, printers, modems, instruments, and other serial peripherals, making it perfect for applications such as multi-point data acquisition, office/factory automation, and industrial control processing. These systems feature a host adapter card with a powerful on-board RISC-based processor that delivers 115.2 Kbps performance allowing applications to run faster. They also include a compact Digi PORTS Module that provides access to 8 or 16 high-speed EIA-232 serial ports or 16 EIA-422 serial ports. When configured for 32 ports using Digi’s exclusive Extended Bus Interface (EBI), for example, AccelePort Xem solutions provide performance up to 115.2 Kbps, allowing each port to take full advantage of the high transmission speeds that are possible with today’s modems, and providing remote users with access to LAN resources.

starting at

$482
Madge 16/4 Token Ring Mk2 Pcmcia Nkh2003
 

Madge 16/4 Token Ring Mk2 Pcmcia Nkh2003

store rating:
$65.00

 

  • product
Madge 16/4 Token Ring Mk2 Pcmcia Nkh2003
Madge 16/4 Token Ring MK2 PCMCIA NEW NKH2003 Shipping Calculator Manufacturer Madge Part Number NKH2003 Description Smart CardBus No Cable 71EVD No Cable/Card Only Condition NEW Availability 8 In Stock (Bin Location: 5-P11-D) Packaging Bulk Frequently...
$65.00
at  
Startech.com 200 Meter Operating Range, No
 

Startech.com 200 Meter Operating Range, ...

store rating:
$73.32

 

  • product
Startech.com 200 Meter Operating Range, No
Buy Now and Save!!! Brand New! 200 meter operating range, no software/power adapter required, black Extend video up to 200 meters using a cat5 cable. This S-video over Cat5 extender is ideal for classrooms, projectors, tradeshows, and retail displays...
$73.32
at  
You'll find the best prices on Cable no in NIC when you shop online at bizrate. Do all your comparison shopping for Digi International, Cables to Go and Cisco NIC in one place. Compare models and see which online Computers & Software stores have the best merchant ratings. Make an informed decision on Cable no NIC before you buy. bizrate will help you with all of your holiday gift shopping needs. Buy DATALOGIC SCANNING QS65 BLK/PDF RS232 NO CABLE [qs65-40140000r] or Cisco WS-X3500-XL Network adapter.