Gigabit ethernet module NIC

Advertisement
sort by:
view as:      
add tax & shipping for
 
 
 

starting at

$46
  • product
The GBIC WS-G5486 is a hot-swappable input/output device that plugs into a Gigabit Ethernet port, linking the port with the fiber-optic network. The WS-G5486, 1000BaseLX/LH interfaces fully comply with the IEEE 802.3z 1000BaseLX standard. However, their higher optical quality allows them to reach 10 km over single-mode fiber (SMF) versus the 5 km specified in the standard.

starting at

$46
 

starting at

$150
  • product
The WS-G5487, 1000BaseZX operates on ordinary single mode fiber optic link spans of up to 70 km in length. Link spans of up to 100 km are possible using premium single mode fiber or dispersion shifted single mode fiber (premium single mode fiber has a lower attenuation per unit length than ordinary single mode fiber; dispersion shifted single mode fiber has both lower attenuation per unit length, and less dispersion).The WS-G5487 must be coupled to single mode fiber optic cable, which is the type of cable typically used in long haul telecommunications applications. The WS-G5487 will not operate correctly when coupled to multi-mode fiber, and it is not intended to be used in application environments (e.g. building backbones, horizontal cabling) where multi-mode fiber is frequently used.The WS-G5487 is intended to be used as a Physical Medium Dependent (PMD) component for Gigabit Ethernet interfaces, as found on various switch and router products. It will operate at a signaling rate of 1250 MBaud, transmitting and receiving 8B/10B-encoded data. When shorter distances of single mode fiber are used, it may be necessary to insert an in-line optical attenuator in the link, to avoid overloading the receiver. A 10 dB in-line optical attenuator should be inserted between the fiber optic cable plant and the receiving port on the WS-G5487 GBIC at each end of the link whenever the fiber optic cable span is less than 25 km. A 5 dB in-line optical attenuator should be inserted between the fiber optic cable plant and the receiving port on the WS-G5487 GBIC at each end of the link whenever the fiber optic cable span is equal to or greater than 25 km, and less than 50 km.

starting at

$150
 

starting at

$80
  • product
The eight-port and 16-port Gigabit Ethernet modules in the Catalyst 6000 Family supports GigaBit Interface Converter (GBIC) modular technology to ensure customers have the maximum flexibility in configuring physical network interfaces in their Gigabit Ethernet network1. GBICs enable the customer to intermix any combination of 802.3z-compliant 1000BaseX interfaces on a port-by-port basis. GBICs are hot swappable and provide easy selection or change of interfaces. Cisco is offering a 1000BaseLX/LH interface that is fully compliant with the IEEE 802.3z 1000BaseLX standard, but has the ability to go up to 10 km over single mode fiber, 5 km further than garden-variety 1000BaseLX interfaces. The 1000BaseZX standard has the ability to transmit traffic up to 100 Km over dispersion shifted fiber.

starting at

$80
 

starting at

$170
  • product
Cisco offers a variety of connectivity, expansion and upgrade modules and cards to accommodate the customer specific needs. Cisco's components are easily and inexpensively upgradeable as customer requirements change.

starting at

$170
 

starting at

$180
  • product
This 16-port fabric-enabled Gigabit Ethernet module for the Catalyst 6500 series switches with single fabric channel interface requires GBICs and is upgradeable to support distributed forwarding via the addition of the distributed forwarding daughter card.

starting at

$180
 

starting at

$200
  • product
The Cisco Catalyst 6000 Family supports a full line of Ethernet and Fast Ethernet switching modules that deliver high performance, excellent scalability, and superior manageability - -all at industry-leading price/performance ratios. The Catalyst 6000 Family Ethernet and Fast Ethernet switching modules offer unparalleled physical interface flexibility, including 10/100BaseTX with RJ-45 or Telco RJ-21 interfaces as well as 100BaseFX and 10BaseFL with multimode fiber MT-RJ connectors. And with up to 48 10/100 ports per module, the Catalyst 6000 Family switches provide high port density 10/100 - -up to 384 Fast Ethernet connections per platform.The Catalyst 6000 Family Ethernet and Fast Ethernet modules support multiple priority queues for quality of service (QoS). Each port supports Weighted Random Early Detection (WRED) for congestion avoidance with queues, and Weighted Round Robin (WRR) for scheduling between queues. The Catalyst 6000 Family of switches maintains up to 32, 000 active Media Access Control (MAC) addresses in the bridge lookup table. The standard 802.1d spanning-tree algorithm is supported on a VLAN basis for fault-tolerant connectivity.

starting at

$200
 

starting at

$20
  • product
The 3Com OfficeConnect 10/100 NIC helps give small offices the competitive advantages that large corporations get from their networks. Designed for Windows-based networks, it delivers fast, reliable desktop connections for a price that fits small-business budgets.Create powerful peer-to-peer or client/server LANs for sharing databases, sending e-mail, and supporting business applications. This Plug-and-Play NIC automatically senses and connects to 10 or 100 Mbps networks.

starting at

$20
 

starting at

$578
  • product
3Com Corporation enables individuals and organizations worldwide to stay connected by communicating and sharing information anytime, anywhere! In order to meet your evolving network needs 3Com offers you a variety of network modules designed for specific 3Com systems. They give you a flexible, cost-effective connectivity solution for all types of networks. And the modular architecture makes it easier to provide connections for range of network environments and protocols. These network modules allow building flexible, affordable enterprise network solutions combining diverse technologies and network services in one system, so your resources go farther and do more.

starting at

$578
 

starting at

$26
  • product
Cabletron Systems offers a Gigabit Ethernet Port Interface Module (GPIM), 1000BaseSX. Its Fiber SC Connector (1000Base-SX, 850 nm source) accepts 50 or 62.5-micron multimedia fiber.

starting at

$26
 

starting at

$26
  • product
NORTEL 1PORT 1000BSX GIGABIT INTERFACE GBIC FOR 8108 GBIC MODULE

starting at

$26
 

starting at

$36
  • product
The Accelar 8108GBIC I/O module provides eight bays for installing any of four types of gigabit interface converters (GBICs). These fiber ports allow you to make riser connection, server attachments, or interswitch links.

starting at

$36
 

starting at

$162
  • product
Nortel Networks' portfolio of advanced solutions and services helps to unify networks around the world. These networks - voice and data, wireless and wireline - are converging, forming consolidated, cost-effective, packet-based networks that are easy to manage, maintain, and modernise.As demands on the network grow, capacity can easily be increased by inserting additional modules into networking device's chassis, or scaling to higher-bandwidth interface modules, or replacing some modules with upgrades. That is why Nortel Networks' products feature modular design.

starting at

$162
 

starting at

$265
  • product
The Catalyst 6000 family meets the demands of today's most demanding and fast-growing enterprise and service-provider networks with high-performance gigabit Ethernet switching modules. available in 8- or 16-port versions, the Catalyst 6000 family Gigabit Ethernet switching modules are ideal for deployment in gigabit backbone and server-farm configurations or for aggregation of high-density 10/100-megabits per second (mbps) wiring closets. Up to eight gigabit Ethernet modules can be added to a single nine-slot Catalyst 6000 family, for a maximum of 130 gigabit ports per platform.

starting at

$265
 

starting at

$88
  • product
The increased popularity of the Internet as an electronic agent for commerce, entertainment, communication, and information retrieval is causing IP traffic to double every six months. This exponential growth in IP traffic is driving service providers to upgrade their network infrastructure and engineer their Points-of-Presence (POPs) with higher performance and scalable Layer 3 switches and routers. Cisco offers the Gigabit Ethernet (GE) line card for the GSR 12000 series of routers to address the need to interconnect devices within POP at high data rates. This low-cost solution is also compelling for Internet service providers (ISPs) with large server farms who are looking for low-cost links between the servers and the POPs GSRs.The GE line card is the first Ethernet-based product for the GSR 12000 series, providing a cost-effective, high bandwidth solution between co-located GSRs or between GSRs and IP-related equipment such as edge routers, gigabit Ethernet switches, or network servers.

starting at

$88
 

starting at

$222
  • product
The GPIM-08 Gigabit Ethernet Port Interface Module is a single-mode fiber-optic interface device that can be installed into a Cabletron Systems device that supports Cabletron Systems Gigabit Ethernet Port Interface Modules.

starting at

$222
 

starting at

$424
  • product
1 PORT GIGABIT-LX SWITCH MODULE FOR HP PROCURVE SWITCHES (J4114A) SINGLE FIBER-OPTIC PORT WITH SC CONNECTOR FOR 1000MBPS OPERATION KEY SELLING BULLETS LONG-DISTANCE GIGABIT ETHERNET CONNECTIVITY: THE GIGABIT-LX SPECIFICATION ALLOWS A DISTANCE OF UP TO 5KM ON 9 MICRON SINGLE-MODE FIBER AND UP TO 550 METERS ON 62.5 MICRON OR 50 MICRON MULTIMODE FIBER. PORT IS AUTO-ENABLED - READY TO OPERATE AS SOON AS IT IS INSTALLED AUTO-CONFIGURATION: A DEFAULT CONFIGURATION THAT WORKS WELL FOR MOST NETWORKS ADHERES AND CONFORMS TO THE IEEE 802.3Z STANDARD FOR GIGABIT CONNECTIVITY LINK AND MODE LED'S FOR EVERY PORT PROVIDE INFORMATION ON LINK STATUS NETWORK ACTIVITY CONNECTION BANDWIDTH AND COMMUNICATION MODE(HALF OR FULL DUPLEX) HOTSWAP OPERATION BANDWIDTH: CAPABLE OF DELIVERING 1 GBPS HALF DUPLEX AND 2 GBPS FULL DUPLEX PERFORMANCE Technical Specifications: SYSTEM AND OTHER REQUIREMENTS PROCURVE 8000M PROCURVE 4000M PROCURVE 1600M

starting at

$424
 
store rating:
  • product
Dual Rate 10GBASE-SR SFP+ Module Product Type:XFP Data Transfer Rate:10Gbps Gigabit Ethernet
 
store rating:
  • product
FTLF1424P2BCL Gigabit SFP Module Product Type:SFP (mini-GBIC) Form Factor:Hot-pluggable Data Transfer Rate:4.25Gbps Gigabit Ethernet Bi-directional
You'll find the best prices on Gigabit ethernet module in NIC when you shop online at bizrate. Do all your comparison shopping for Cisco, 3Com and Enterasys NIC in one place. Compare models and see which online Computers & Software stores have the best merchant ratings. Make an informed decision on Gigabit ethernet module NIC before you buy. bizrate will help you with all of your holiday gift shopping needs. Buy Cisco WS-G5486 Transceiver GBIC Module or ER SFP + MODULE 10 GIGABIT ETHERNET [ext-10309].