O smith pool pump motor

Description:

A.O. Smith C-Face Pool Pump Motor Energy Efficient Full Rated 2HP 230V # ST1202 Pool Pump Motor, Open Drip Proof, Capacitor-Start/Capacitor Run, 2 HP, 3450 RPM, 56J NEMA Frame, 208-230 Voltage, 12.6-11.4 Full Load Amps, C-Face Mounting, Auto Thermal...

Description:

A.O. Smith Swimming Pool Pump Motor - Round Flange - Threaded Shaft Motor - 1.5 HP. This A.O. Smith replacement motor is for the Baker Hydron, Hayward Super and Super II, Max-Flo pumps

Description:

2 hp 3450rpm 48Y Frame 230V. This motor is common to Sta-Rite pumps and many other pumps that require a 48Y Square Flange Motor.

Description:

3/4 HP 115 / 230 Volt 14.8 / 7.4 Amp Square Flange A.O. Smith Pool Motor - SQ1072

Description:

48Y Square Flange replacement pool motor. Motor is found on many in ground pool pumps such as Sta-Rite Max-E Glas, Dura Glas, Dyna Glas. Motor has a square type flange for mounting the pump. 4 non-threaded bolts holes in flange. 1 year manufacture...

Description:

1 HP 115 / 230 Volt 19.2 / 9.6 Amp 48Y Square Flange A.O. Smith Pool Motor - SQ1102

Description:

Manufacturer Part Number: SN1102 Our Part Number: 5112-052 Product Description: MOTOR, 1 HP FULL RATED Manufacturer: A. O. SMITH

Description:

Manufacturer Part Number: SN1202 Our Part Number: 5112-054 Product Description: MOTOR 2 HP FULL RATED Manufacturer: A. O. SMITH

Description:

A.O. Smith Centurion replacement motor for Pentair WhisperFlo and Challenger full rated pumps. Specifications: HP = 2, RPM = 3450, Voltage = 230, Amps = 11.5, Service Factor = 1.30, Frame = 56Y, Shaft = Threaded. *Please Note: This is the correct...

Description:

A.O. Smith Centurion replacement motor for Pentair WhisperFlo and Challenger full rated pumps. Specifications: HP = 3/4, RPM = 3600, Voltage = 115/230, Amps = 14.2/7.1, Service Factor = 1.65, Frame = 56Y, Shaft = Threaded. *Please Note: This is the...

Description:

A.O. Smith Centurion replacement motors for Pentair WhisperFlo, energy efficient, up rated pumps. Specifications: HP = 1, RPM = 3600, Voltage = 115/208-230, Amps = 11.2/6.0-5.6, Service Factor = 1.25, Frame = 56Y, Shaft = Threaded.

Description:

A.O. Smith Centurion replacement motors for Pentair WhisperFlo, energy efficient, full rated pumps. Specifications: HP = 3/4, RPM = 3600, Voltage = 115/208-230, Amps = 11.2/6.0-5.6, Service Factor = 1.67, Frame = 56Y, Shaft = Threaded.

Description:

A.O. Smith Centurion replacement motor for Pentair WhisperFlo and Challenger full rated pumps. Specifications: HP = 1, RPM = 3600, Voltage = 115/230, Amps = 16.0/8.0, Service Factor = 1.65, Frame = 56Y, Shaft = Threaded. *Please Note: This is the...

Description:

A.O. Smith Centurion (Magnetek) replacement motors for Pentair WhisperFlo, energy efficient, full rated pumps. Specifications: HP = 1, RPM = 3600, Voltage = 115/208-230, Amps = 14.8/7.8-7.4, Service Factor = 1.65, Frame = 56Y, Shaft = Threaded.

Description:

A.O. Smith Centurion replacement motors for Pentair WhisperFlo, energy efficient, up rated pumps. Specifications: HP = 1.5, RPM = 3600, Voltage = 115/208-230, Amps = 14.8/7.8-7.4, Service Factor = 1.10, Frame = 56Y, Shaft = Threaded.

Description:

Voltage 115/230, Max Amps 115V = 14.6 230V = 7.3, Single Speed, Round Flange, RPM = 3450, Threaded Shaft, Frame = 56J Used on the following models: Hayward Max Flow, Hayward Super Pump, Hayward Super II, Hayward Northstar and Jacuzzi Magnum pumps.

Description:

Voltage 230, High Speed HP = .75 Low Speed HP = 1/6, Dual Speed, Round Flange, RPM @ High Speed = 3450 RPM @ Low Speed = 1625, Threaded Shaft, Frame = 56J Used on the following Dual Speed pump models: Hayward Max Flow, Hayward Super Pump, Hayward Super...

Description:

A.O. Smith Centurion replacement motor for Pentair WhisperFlo and Challenger full rated pumps. Specifications: HP = 1.5, RPM = 3600, Voltage = 115/230, Amps = 22.4/11.2, Service Factor = 1.50, Frame = 56Y, Shaft = Threaded. *Please Note: This is the...

Description:

A.O. Smith Centurion replacement motors for Pentair WhisperFlo, energy efficient, up rated pumps. Specifications: HP = 2, RPM = 3600, Voltage = 208-230, Amps = 9.6-8.8, Service Factor = 1.10, Frame = 56Y, Shaft = Threaded.

Description:

Voltage 230, High Speed HP = 1.0 Low Speed HP = 1/6, Max Amps @ High HP = 8.5 Max Amps @ Low HP = 2.5, Dual Speed, Round Flange, RPM @ High Speed = 3450 RPM @ Low Speed = 1625, Threaded Shaft, Frame = 56J Used on the following Dual Speed pump models:...