Plumbing Supplies › schedule 40 galvanized steel pipe

WHEELER-REX 16300 Pipe Fitting Reamer,3 in,Schedule 40

Pipe Fitting Reamer, Characteristics 3 in., Application Reams Solvent Welded PVC/ABS Fittings, For Use With Schedule 40 Pipe, and 1/2 in. Standard or R/A Drill (1000 rpm max.)

Welded Steel Schedule 40 Pipe Pipe,1 1/2 In x 10 Ft,Threaded,Galv

Pipe NipplePipe Size 1-1/2 In., Connection Threaded, Length 10 ft., Schedule 40, Material of Construction Carbon Steel, 1.610 Inside Dia. (In.), 1.900 Outside Dia. (In.), 0.145 Wall Thickness (In.), Compliance Certified For Use In Potable ...

Spears 447 Series PVC Pipe Fitting, Cap, Schedule 40, 6" Socket

Molded Schedule 40 products are manufactured to ASTM D 2466 for use with pipe manufactured to ASTM D 1785. Certain products carry reduced pressure handling capability and have maximum internal pressure ratings at 73 degrees Fahrenheit ...

kee safety 59-9 spigot flange galvanized steel 2" ips (2.41" id)

a spigot flange which fits inside the pipe and is not secured by a set screw. type 59 can only be used with pipe wall thickness of 1/8" and in light, self supporting structures. type 59 is manufactured in aluminum. no fixing holes are ...

Black Steel Schedule 80 Seamless Pipe Pipe,Steel,150 Steam PSI,3 x 18

PipePipe Size 3 In., Length 18 In., NPT Connection, Material of Construction Black Steel, Schedule 80, WOG (PSI) 300 @ 550 Degrees FStandards ASTM A106, ASTM A733, and ANSI/ASME B1.20.1

Charlotte Pipe 1-1/2-in x 20-ft 330 PSI Schedule 40 PVC Pressure Pipe PVC 07112 0800

PVC Schedule 40 white pipe with red print that is 'dual marked' for DWV and pressure applications. PVC Schedule 40 pipe and DWV fittings are used in sanitary drain, waste and vent (DWV), sewer and storm drainage applications. PVC Schedule ...

Black and Galvanized Steel Schedule 160 Pipe Nipples and Seamless Pipe

Pipe Nipple, Pipe Size 1/2 x 8 In, Connection Seamless, Material of Construction Black Steel, Schedule 160, WOG (PSI) 900 At 150 Deg F, Saturated Steam Pressure 150, Standards Class 150, ANSI B1.20.1 Specifications

WHEELER-REX 16150 Pipe Fitting Reamer,1-1/2 in,Schedule 40

Pipe Fitting Reamer, Characteristics 1-1/2 in., Application Reams Solvent Welded PVC/ABS Fittings, For Use With Schedule 40 Pipe, and 1/2 in. Standard or R/A Drill (1000 rpm max.)

4gta8 Nipple,red Brass,1 1/4 X 8 In 4gta8

Nipple, Schedule 40, Pipe Size 1 1/4 In, 8 In Length, Connection Threaded On Both End, Material Of Construction Red Brass, Outside Dia. 1 2/3 In, Thread Size 11 1/2 In, Pressure 125 Psi, Temp. Range - 20 To 400 Degrees F, Standards Astm ...

Chrome-Plated Brass Pipe Fitting, Nipple, Schedule 40, 1/4" NPT

The Merit Brass nipple is a schedule 40 chrome-plated brass pipe fitting with male National Pipe Taper (NPT) threads for connecting and extending female threaded pipes. The fitting has NPT threads for creating tighter seals than straight ...

NIBCO 429 Series PVC Pipe Fitting, Coupling, Schedule 40, 1" Slip

The NIBCO 429 schedule 40 coupling pipe fitting is made of PVC and has slip connections. This coupling fitting connects two pipes going in the same direction with the same diameter to extend a straight run. It has female slip openings for ...

Stainless Steel 304/304L Butt-Weld Pipe Fitting, Cap, Schedule 40, 4" Pipe Size

The Merit Brass cap is a schedule 40 stainless steel 304/304L butt-weld pipe fitting for closing the end of a pipe. The cap s female butt-weld, beveled opening fits over the outside of a male pipe or fitting it s closing for a smooth bore. ...

Schedule 40 Dielectric Pipe Nipples Dielectric Nipple, 1 In.NPT Connec

Dielectric Nipple, Pipe Size 1 In, Length 4 In, NPT Connection, Material of Construction Non-Alloy Steel And PEX, Schedule Schedule 40, WOG 150 At 200 Deg F PSI, Standards ASTM A 53 ANSI B1.20.1

kee safety 10-75 reducing fitting - single socket tee galvanized steel 1-1/4" x 3/4" ips (1.72" x 1.

designed to give a 90° butt joint between two pipes. frequently used for the joint between end uprights and the middle rail on safety railing where the site is straight and level. also for base ties on racking. this fitting cannot be used ...

kee safety 145-7 crossover coupling galvanized steel 1-1/4" ips (1.72" id)

this fitting is designed to give a 90 degree offset crossover. as there are two socket set screws in the sleeve, this kee klamp fitting can be used where a join is required in the horizontal pipe. for economy, it is possible to use a kk45 ...

kee safety 10-6 single socket tee galvanized steel 1" ips (1.38" id)

designed to give a 90° butt joint between two pipes. frequently used for the joint between end uprights and the middle rail on safety railing where the site is straight and level. also for base ties on racking. this fitting cannot be used ...

kee safety 55-7 obtuse angle elbow galvanized steel 1-1/4" ips (1.72" id)

the kk55 is an ideal fitting to use as an alternative to bending, or when a junction between a sloping pipe and an end post is required - i.e., guardrailing and staircases. part weight a d e 55-6 1.12 lbs.61.81 in.4.57 in.55-7 1.78 ...

Black Steel Schedule 80 Seamless Pipe Nipples Nipple,Steel,150 PSI Ste

Nipple, Pipe Size 2 1/2 x 5 1/2 In, Connection NPT, Material of Construction Black Steel, Schedule 80, WOG (PSI) 300 At 150 Deg F, Saturated Steam Pressure 150, Standards ASTM A733