Chicago electric power saw Power Tools

Description:

Sharpens circular saw blades from 4" to 15-3/4" diameter Motor block tilts 25° left and right to handle different blade tooth configurations Specialized blade receiver accepts blades with arbors up to 1" Blade indexing arm for fast and easy...

Description:

Made By: SKIL POWER TOOLS COMPANY 4300 W. Peterson Ave. Chicago, IL 60646 Features: Orbital/Scroller Stroke: 5/8" Maximum Capacity; Wood: 2-1/4, Aluminum: 1/2", Steel: 1/4" Dust Port Chip Deflector - Scrolling Knob - Vari-Orbit & Scrolling Control...

Description:

Made By: SKIL POWER TOOLS COMPANY 4300 W. Peterson Ave. Chicago, IL 60646 Features: - Voltage: 120 Vlt 12 Amps - Power: 2.4 HP - Frequency: 60 Hz - Speed: 4600 RPM - Depth Of Cut At 90 Degrees: 2-7/16" - Depth Of Cut At 45 Degrees: 1-15/16" - Double...

Description:

Made By: SKIL POWER TOOLS COMPANY 4300 W. Peterson Ave. Chicago, IL 60646 Features: - Voltage: 120 Vlt \ 11 Amps - Power: 2.3 HP - Frequency: 60 Hz - Speed: 4600 RPM - Depth Of Cut At 90 Degrees: 2-7/16" - Depth Of Cut At 45 Degrees: 1-15/16" - Double...

Description:

Made By: SKIL POWER TOOLS COMPANY 4300 W. Peterson Ave. Chicago, IL 60646 Features: - Color May Vary - Voltage: 120 Vlt 13 Amps - Power: 2.4 HP - Frequency: 60 Hz - Speed: 4600 RPM - Depth Of Cut At 90 Degrees: 2-7/16" - Depth Of Cut At 45 Degrees:...

Description:

Made By: SKIL POWER TOOLS COMPANY 4300 W. Peterson Ave. Chicago, IL 60646 Features: - Voltage: 120 Vlt / 10 Amps - Power: 2.4 HP - Frequency: 60 Hz Speed: 5000 RPM Depth Of Cut At 90 Degrees: 2-1/2" Depth Of Cut At 45 Degrees: 1-31/32" Double Insulated...

Description:

Made By: SKIL POWER TOOLS COMPANY 4300 W. Peterson Ave. Chicago, IL 60646 Features: - Voltage: 120 Vlt 12 Amps - Power: 2.4 HP - Frequency: 60 Hz - Speed: 4600 RPM - Depth Of Cut At 90 Degrees: 2-7/16" - Depth Of Cut At 45 Degrees: 1-15/16" - Double...

Description:

Two-position cutting head lets you adjust blade for standard tiles or bricks up to 3-3/4" thick. Includes built-in 3 gallon per minute water pump, removable easy-to-clean high-impact ABS water tub, 45° miter fixture. - Cuts tiles up to 18" long, 12"...

Description:

Cool-running diamond wet blade makes quick, precise cuts in tile up to 12" wide. Comes with 40 oz. wet tray, blade guard, bench stops, push block and arbor wrench. - Sealed motor - 22.5° to 45° bevel - 4480 RPM - 1-1/16" cutting depth Diamond blade...

Description:

- Cuts floor and wall tiles up to 24" x 24", marble and brick up to 25" long - Maximum depth of cut: 1" @ 90°, 1" @ 45° - Rip fence scale: 0" to 8-1/4" in 1/8" increments and 0 to 210mm in 2mm increments - Bevel cut: 0 to 45° left - Waterproof on/off...

Description:

This powerful saw cuts tile up to 12'' wide and 1'' thick. - Compact size for easy portability - Dry or wet tile cutting - Table tilts up to 45° for bevels - Table is chrome plated for rust resistance - 15 gauge powder-coated steel frame - Includes...

Description:

Sliding compound miter saw gives you extra cutting capacity. It is more accurate and convenient than a radial arm saw. - Laser cutting guide for super-accurate cuts - Heavy duty 15 amp motor - Cutting capacity: 12-3/4'' x 4'' @ 90°, 12-3/4'' x...

Description:

Make perfect cuts in steel, brass, aluminum, and wood in 1/10th the time it takes by hand. So accurate that you may never have to file or sand ends. - Includes one 2'' diameter high speed steel blade - Motor: 110 volts, 0.9 amps, 7800 RPM maximum -...

Description:

110 volt, 60 Hz, 150 watt electric body saw. - Designed to cut autobody plate and other metals - 2650 strokes per minute - 6 ft. power cord Blade included. Overall dimensions: 10-1/4" L x 2" W x 3" H Weight: 2.03 lbs.

Description:

Make precision cuts in tile up to 1-3/8" thick. Suitable for all types of tile. Cast aluminum gear housing. Includes 7 ft., 16 gauge cord and two wrenches. - Motor: 110 volts, 3.2 amps, 60 Hz - Maximum speed: 11,000 RPM - Arbor: 5/8" Diamond blade...

Description:

- Fixed cutting depth - Easy access brush replacement Power cord: 76" L; 1 HP; No load 4800 RPM; Rating: 120V AC, 60 Hz

Description:

Make complex cuts, crosscuts, even rip cuts with the same tool! Includes free 8-1/4" X 40 Tooth C2 tungsten carbide tipped blade. - Motor: 1-3/4 HP, 120V, single phase, 20.9 amp - Spindle speed: 4200 RPM - Crosscut: 11'' maximum - Rip: 20'' maximum -...

Description:

- 4" cutting capacity - For metal or masonry - Low vibration - Built-in work vise - Mitre angle: 0-45° right/0-30° left - Maximum speed: 3400 RPM - 2 HP; 1" arbor Cutting wheel sold separately. Shipping weight: 35 lbs.

Description:

- Maximum cutting depth: 2-1/4" - 1.9 HP, 110 volt, 13 amp, 4500 RPM - 0° to 45° bevel adjustment - Worm drive with oil bath - Spring loaded blade guard - Depth lever and bevel adjustment - Safety switch and adjustable foot - Easy access carbon brushes...

Description:

This powerful 15 amp workhorse has all the power you need to cut through a bundle of metal studs in one pass. - Maximum speed: 3900 RPM - Maximum cut @ 90° miter: 4" - Easy-grip front D-shaped handle for left- or right-hand operation - Quick-lock vise...

Description:

- High performance 15 amp motor - Guide plate adjusts 45° left and right - Fully shielded bearings ensure smooth operation - Spindle lock for quick wheel changes - Quick release vise - Easy access brushes 120 volt, 15 amp, 3500 RPM, 1" arbor, Cutting...

Description:

Smooth-running ball- and needle-bearing motor is designed for long life. Well-balanced for easy operation. Comes with extra brushes, hex key, one 6'' blade for wood, one 4'' blade for metal. - 1-3/16'' stroke for fast, efficient cutting - 0-15° swivel...

Description:

Variable speed button allows you to accurately set desired speed from 500 to 3000 strokes per minute. Clear PVC blade guard permits viewing of cutting line while operating. Includes one each 6 TPI and 24 TPI blades. - 5 speed settings - Trigger locks...

Description:

- Bright red laser line ensures precise cuts - Three stage orbital action with 11/16" stroke - 500-3000 strokes per minute - Six-position dial speed control - Foot plate adjusts 0-45° left and right - Soft grip handle Laser runs on two AAA batteries,...

Description:

- Powerful 10 amp motor - 4500 RPM - Dual-grip handle design for better control - Calibrated bevel adjustments for accurate cutting from 0° to 45° - All ball bearing for long life - Direct drive - Easy-pivot shoe with depth scale Includes 7-1/4'' x 20...

Description:

Handle rotates completely through 180° with five positive stops at 0, 45° and 90° left, and 45° and 90° right for comfortable and controlled cutting from any angle. - Powerful 6 amp motor with a variable speed trigger goes from 0 to 2500 strokes per...

Description:

This powerful 15 amp workhorse has all the power you need to cut through a bundle of metal studs in one pass. - Maximum speed: 3800 RPM - Maximum cut @ 90° miter: 4" - Easy-grip front D-shaped handle for left- or right-hand operation - Quick-lock vise...

Description:

Powerful 10 amp motor develops up to 5000 RPM for quick and easy cutting. - Dual grip handle design for better control - All ball bearing for long life - Calibrated bevel adjustments for accurate cutting from 0-45° - Easy pivot shoe with depth scale -...

Description:

- 7.5 peak amps, 120 volts, 60 Hz - 0-2400 RPM, 1" stroke - Cutting capacity: wood 1/2", metal: 3/4" - Includes one metal-cutting blade, one woodcutting blade, and one 3mm hex key wrench - Chuck capacity: universal 1/2" shank blades - Plastic cutting...

Description:

- Six position variable speed - Rubber encased two-finger trigger - Quick change blade clamp - Integrated laser on/off switch - Dust chute - 120V, 60 Hz - Cutting speed: 800-3000 SPM - Cutting capacity: 3-11/32" wood, 1/4" metal - Shoe tilts 0-45° left...