Gas welding torch Power Tools

Description:

Also known as: AP COMBI120, APCOMBI120, APT-COMBI120, AST-COMBI120, ASTCOMBI120; Features and Benefits Combination indoor (gas) and outdoor (no gas) welding Ideal for light industrial applications Fan cooled for increased duty cycle Lightweight,...

Description:

Campbell Hausfeld WT5000 Porta-Torch Kit The most highly portable self-contained welding and cutting set available. No electricity required. Oxygen and acetylene gases (purchased at local welding gas distributors) provide power to weld, braze or cut a...

Description:

Gas-Welding-Equipment - Lt91 Hand Torch

Description:

Performance matched cutting attachments are available for each torch handle series Gas Type = All Fuel Gases Flame Barrel Racking Length = 6 in Connections = Hose 3/24 in - 18 Body Includes = Reverse Flow Check Valves Packing Wt. = 8 1/2 oz UL listed

Description:

Inlet Gas Cutting Cap. = 1/2 in [Max] Flame Welding Range = 1/4 in [Max] Includes = 100FC Torch Handle, Built-In Flashback Arrestors, Reverse Flow Check Valves, W-1 Welding Nozzle, Size: 2, CA1350 Cutting Attachment, 0-3-101 Cutting Tip, CSR 350D-540...

Description:

Professional Grade Victor-Type Gas Welding and Cutting Kit - Everything You Need for Professional Welding and Cutting Results * Torch Handle * Oxygen Regulator * Acetylene Regulator * Cutting Attachment * Cutting Nozzle: No. 2 * Welding Nozzles: No.0, No.

Description:

WCT1044: Ships Via Small Parcel Ground WP-20 torches are designed for long-term, trouble-free service and offer consistent welding performance in general applications.Mechanical fittings provide a secure connection to prevent gas or water leakage and...

Description:

? For general purpose welding and brazing ? Use with the WH260C or WH360C welding torch handles ? 100% flame tested ? Double o-ring seal, hand tight only. Size-3 for 1/8'' to 3/16'' metal thicknessBy Firepower.

Description:

WCT1053: Ships Via Small Parcel Ground Designed for welding operators who encounter multiple joint configurations or joints with limited access. Copper head and coil assembly increases cooling capacity for longer, more reliable torch performance and...

Description:

Gas-Welding-Equipment - Ls20 Swivel Torch

Description:

ANCHOR" MEDIUM COLLET BODY Size 3/32 in Size Group: Medium Material: Brass, Copper Type Gas Lens Collet Body Two-piece construction. Used on Torch(es): 17, 18, 26. Gas lenses provide a more efficient stream of shielding gas to the welding process. The...

Description:

Sold as each. General purpose welding and brazing. Used with WH260C welding torch handles. Complete with brass universal gas mixer and elbow tip. One-piece copper elbow construction. Acetylene gas only. Double o-ring seal, hand tight only. 100% flame...

Description:

Sold as each. General purpose welding and brazing. Used with WH260C welding torch handles. Complete with brass universal gas mixer and elbow tip. One-piece copper elbow construction. Acetylene gas only. Double o-ring seal, hand tight only. 100% flame...

Description:

Victor Gas Outfit 0384G0822 Gas Outfit Gas Welding Outfits Gas Outfit Pressure Regulators SR350D540/SR360A300 Torch Handle 100FC Welding Nozzles (

Description:

Kit includes burner wand hose oxygen regulator fuel gas valvem cylinder stand MG9 16 oz. MAPP Gas cylinder OX9 11 cubic foot oxygen cylinder spark lighter and 5 brazing/welding rods.

Description:

Professional Grade Victor-Type Gas Welding and Cutting Kit - Everything You Need for Professional Welding and Cutting Results * Torch Handle * Oxygen Regulator * Acetylene Regulator * Cutting Attachment * Cutting Nozzle: No. 2 * Welding Nozzles: No.0, No.

Description:

Torch handle with cutting attachment. Oxygen and acetylene regulator. Also comes with goggles and spark lighter...1pc cutting tip...1pc heating tip...1pc cleaner...1pc spark lighter...1pc welding goggles...1pc 15ft welding hose...

Description:

Torch handle with cutting attachment. Oxygen and acetylene regulator. Also comes with goggles and spark lighter...1pc cutting tip...1pc heating tip...1pc cleaner...1pc spark lighter...1pc welding goggles...1pc 15ft welding hose...

Description:

Acetylene regulator * Oxygen regulator * Cutting attachment * Cutting handle * Cutting nozzle * Mixer heating tip and pipe * Welding tip 1, 2 and 3 * Tip cleaner * Gas welding goggles * 15" x 1/4" Twin rubber hose * Spark lighter * Storage case

Description:

###############################################################################################################################################################################################################################################################

Description:

GENUINESMITH EQUIPMENT CUTTING TIPS These are genuineSmith Equipment cutting tips. The cutting tips are series MC12. They fit the smallerSmith torch. Fuel Gas Acetylene Tip Size # 1 Metal cutting thickness Up to 5/8" 6 Hole preheat tip

Description:

GENUINESMITH EQUIPMENT CUTTING TIPS These are genuineSmith Equipment cutting tips. The cutting tips are series MC12. They fit the smallerSmith torch. Fuel Gas Acetylene Tip Size # 3 Metal cutting thickness Up to 2" 6 Hole preheat tip

Description:

Includes torch, hoses, five tips, empty oxygen tank and regulator, empty fuel gas tank and regulator and handy plastic carrying caddy. Shipping weight 31 lbs. (14 kg)

Description:

Quality brass and stainless steel, uses oxygen and acetylene gases for general-purpose welding and cutting. Quality construction provides durability to meet the most demanding service and use. Welds up to 1/4" and cuts up to 4" with optional tips, sold...

Description:

GENUINESMITH EQUIPMENT CUTTING TIPS These are genuineSmith Equipment cutting tips. The cutting tips are series MC12. They fit the smallerSmith torch. Fuel Gas Acetylene Tip Size # 0 Metal cutting thickness Up to 3/8" 6 Hole preheat tip

Description:

GENUINESMITH EQUIPMENT CUTTING TIPS These are genuineSmith Equipment cutting tips. The cutting tips are series MC12. They fit the smallerSmith torch. Fuel Gas Acetylene Tip Size # 2 Metal cutting thickness Up to 1" 6 Hole preheat tip

Description:

Quality brass and stainless steel, uses oxygen and acetylene gases for general-purpose welding and cutting. Quality construction provides durability to meet the most demanding service and use. Welds up to 1/4" and cuts up to 4" with optional tips, sold...