Hobart welders Power Tools

Description:

Powerful and portable, the Handler 187 operates off 230 Volt power. 7 voltage settings and infinite wire feed control enable fine tuning for the smoothest arc with less spatter. Comes ready t...

Description:

Operates from 115V standard household current Amperage output range of 25-140, 20% duty cycle at 90 amps, 19 volts Welds 24 ga. up through 1/4 in. Features built-in contactor and thermal overload protection Includes gun, gas valve, regulator and hose,...

Description:

The Hobart Handler 210 Wire Feed MIG Welder handles solid mild steel or stainless, flux cored and aluminum wires, with or without shielding gas. 7 output voltage settings and infinite wire fe...

Description:

For MIG applications, just add shielding gas & solid wire. Electrically cold contact tip & wire until trigger is pulled. 4 in. or 8 in. wire spool capability. Thermal overload & short circuit protection. Power cord & plug included & fully assembled....

Description:

Rugged and portable, the Handler 125 operates off 115-volt household current. Comes ready to weld without shielding gas using 0.030-0.035in. flux cored wire. This unit has an optional...

Description:

The Handler 125EZ is the easiest to use wire welder ever! Innovative new single knob control makes it easy to set up welder for different material thicknesses. Operates off 115V household curre...

Description:

The Handler 140 comes ready to weld with or without shielding gas, no additional kit required. With an amperage output range of 25-140, it easily handles a broad selection of solid mild ...

Description:

This exceptional special offer pairs the Hobart Handler 210 wire feed MIG welder with a Hobart 10-ft. spoolgun. U.S.A. Amps: 210, Duty Cycle: 30percent at 150 Amps, 23V, Mig Ready: Yes, Weldabl...

Description:

Choose between AC or DC output to expand your welding options. The LX 235 AC/160 DC has a maximum of 235 AC and 160 DC weld output. Smooth DC weld performance with easy arc starts is easily adjuste...

Description:

The Hobart Trek 180 is the first self-contained MIG welding system for applications off the power grid. Includes two internal sealed lead acid batteries and integrated charger that allow ...

Description:

Seven tap voltage control allows for a smooth arc Handles wire spools up to 45 pounds Built-in thermal overload protects welder from overheating Hinged door for access to wire drive system for spool and drive roll changes 12 ft. 200 amp MIG gun Online...

Description:

Hobarts STICKMATE models are the top performers in their class. 205AC model comes with the Accu-Set infinite amperage control, weld time increases up to 100percent with decreased output. Recommended ...

Description:

Flux Cored. Applications: Maintenance, Construction, Auto Body, Farm/Ranch, Rental and Home. Materials: Steel, Stainless Steel, Aluminum.

Description:

Waterproof canvas cover resists stains and mildew, protecting the finish of your welder. For our #164694 and #164696 welders.

Description:

Weld 22 ga. up to 3/8 in. in a single pass 6-tap voltage control for a smooth, easy-to-control arc Infinite wire feed speed control Handles wire spools up to 12 in. - speed adjusts from 90 to 750 IPM Reversible drive rolls: 2 grooves for 3 wire sizes...

Description:

Accu-Set amperage indicator for accurately controlling amperage or heat output Infinite current control allows the operator to adjust output by as little as 1-amp increments High 100% duty cycle rating (90 Amps AC) Fully varnished magnetic coils for...

Description:

Waterproof protective cover resists stains and mildew. Fits all Hobart Handler welders. U.S.A.

Description:

Online / Catalog Exclusive!

Description:

Welds 24-gauge to 1/4-inch steel. With built-in wire feeder and quick-release drive roll lever. Built-in contactor feature makes wire cold when not welding. Four voltage settings with wire feed tracking that easily adjusts to different materials and...

Description:

10,000 Watt Generator / 230 Amp DC stick welder. 23 HP Kohler 2-cylinder engine. 10 gallon fuel tank. 50 amp 240VAC receptacle for emergency power generation. Welding range of 50 - 230 amps. Single knob amperage control for easy set up. 20 Ft....

Description:

The Hobart Champion Elite Generator/Welder is a mobile source heavy-duty generator/welder. This engine-driven solution comes with a 23 HP Subaru engine that delivers up to 11,000 Watt...

Description:

Lightweight and compact, the Champion 4500 welder/generator provides you with the power you need wherever and whenever you need it. As an AC welder, the Champion 4500 delivers up to 140...

Description:

4500 watts surge generator power 4000 watts continuous generator power 140 amp AC welder for up to 1/8 in. diameter AC stick electrodes Versatile receptacle package: 2 20-amp, 120VAC receptacles, 2 20-amp 240 VAC Rugged and lightweight - 190 lbs. 10...

Description:

The Hobart Champion Elite Generator/Welder is a mobile source heavy-duty generator/welder. This engine-driven solution comes with a 23 HP Kohler engine that delivers up to 11,000 Watt...

Description:

These lightweight, air-cooled units are portable, easy to operate, and provide a quick and effective means for spot welding mild, galvanized or stainless materials. These units are an excellent...

Description:

Fits Hobart Handler and many other medium-sized welders and cutters. Tire Size (in.): 8, Tire Type: 2 Wheels, 2 Swivel Casters

Description:

Includes spool gun and 20ft. cable. No module required for hookup to IronMan welders. Fits Item# 1646955. U.S.A. Works With: IronMan 210 MIG Welder, Cable Length (ft.): 20

Description:

Ideal for MIG aluminum welding 16 gauge to 1/4".

Description:

The Hobart DP-3035-10 Spoolgun is designed for use with the Hobart Handler 210 MIG Welder, Item# 1646189. Works With: Hobart Handler 210 MIG Welder, Weld Thickness (in.): 1/4, Cable Len...

Description:

Professional auto darkening helmet has the largest viewing area. Lightweight design with multiple adjustments for maximum comfort. The 1/20000 lens provides a9-13 variable shade control, fully adjustable sensitivity and delay controls, with grind mode....