Best Seller
CMT 199.511.11 Solid Carbide Upcut Ball Nose Spiral Bit with 3/4-Inch Diameter with 3/4-Inch Shank

CMT 199.511.11 Solid Carbide Upcut Ball Nose Spiral Bit with 3/4-Inch Diameter with 3/4-Inch Shank

Solid Carbide Upcut Ball Nose Spiral Bit featuring 2 cutting edges for cutting, copying, panel sizing and any routing applications in solid wood, or wood composites, plastic materials and laminates. High feed speed on well-clamped workpiece. Can used... more

$197.86

FREE shipping

go to store
Yonico 14121 Solid Carbide Flush Trim Router Bit- Spiral Upcut 1/4-Inch Shank

Yonico 14121 Solid Carbide Flush Trim Router Bit- Spiral Upcut 1/4-Inch Shank

New: Redesigned with permanent bearing retaining collar to reduce trimming mishaps. The Yonico 14121 solid carbide flush trim upcut router bit is designed to provide extra clean and smooth flush trim cuts. Spiral upcut router bits are ideally used for... more

$22.21

go to store
Best Seller
Tru-Cut X62524 1/2-Inch Shank Fast Spiral Masonry Drill Bit with 24-Inch Length and 5/8-Inch Diameter

Tru-Cut X62524 1/2-Inch Shank Fast Spiral Masonry Drill Bit with 24-Inch Length and 5/8-Inch Diameter

Fast spiral drill bit is carbide tipped for drilling all masonry materials. Straight shank. Many lengths available with different diameter and shank sizes. more

$33.19

go to store
Bosch 85974M 1/2 In. x 1 In. Solid Carbide 3-Flute Downcut Spiral Bit

Bosch 85974M 1/2 In. x 1 In. Solid Carbide 3-Flute Downcut Spiral Bit

Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Downcut spiral is used for downward chip flow and the best finish on the top side of the work piece. The shearing... more

$52.14

FREE shipping

go to store
Bosch 85903M 1/4 In. x 1 In. Solid Carbide 2-Flute Downcut Spiral Bit

Bosch 85903M 1/4 In. x 1 In. Solid Carbide 2-Flute Downcut Spiral Bit

Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Downcut spiral is used for downward chip flow and the best finish on the top side of the work piece. The shearing... more

$19.98

go to store
Bosch 85908M 1/8 In. x 1/2 In. Solid Carbide 2-Flute U-Pieceut Spiral Bit

Bosch 85908M 1/8 In. x 1/2 In. Solid Carbide 2-Flute U-Pieceut Spiral Bit

Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Upcut spiral is used for upward chip evacuation and the best finish on the bottom side of work piece. The shearing... more

$18.99

go to store
Bosch 85961M 1/2 In. x 1-1/4 In. Solid Carbide 3-Flute U-Pieceut Spiral Bit

Bosch 85961M 1/2 In. x 1-1/4 In. Solid Carbide 3-Flute U-Pieceut Spiral Bit

Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Upcut spiral is used for upward chip evacuation and the best finish on the bottom side of work piece. The shearing... more

$60.26

FREE shipping

go to store
Amana Tool 46104 CNC Spiral Flute Plunge 2-Flute Up-Cut Solid Carbide Router Bit, 1/2-Inch Shank

Amana Tool 46104 CNC Spiral Flute Plunge 2-Flute Up-Cut Solid Carbide Router Bit, 1/2-Inch Shank

Spiral router bits are made by Amana Tool, the leading manufacturers of high quality wood cutting tools. Amana Tool 46104 SC Spiral Plunge 3/8 D x 1-1/4 CH x 1/2 SHK x 3 Inch Long 2 Flute Up-Cut Router Bit combines a shearing action in cutting with an... more

$64.60

FREE shipping

go to store
Bosch 85910M 1/4 In. x 3/4 In. Solid Carbide 2-Flute U-Pieceut Spiral Bit

Bosch 85910M 1/4 In. x 3/4 In. Solid Carbide 2-Flute U-Pieceut Spiral Bit

Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Upcut spiral is used for upward chip evacuation and the best finish on the bottom side of work piece. The shearing... more

$20.97

go to store
Bosch 85906M 1/2 In. x 1-1/4 In. Solid Carbide 2-Flute Downcut Spiral Bit

Bosch 85906M 1/2 In. x 1-1/4 In. Solid Carbide 2-Flute Downcut Spiral Bit

Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Downcut spiral is used for downward chip flow and the best finish on the top side of the work piece. The shearing... more

$44.97

FREE shipping

go to store
Amana Tool 46100 Spiral Flute Plunge 1/8-Inch Diameter x 1/2-Inch Cut Height x 1/4-Inch Shank 2-Flute Solid Carbide Router Bit

Amana Tool 46100 Spiral Flute Plunge 1/8-Inch Diameter x 1/2-Inch Cut Height x 1/4-Inch Shank 2-Flute Solid Carbide Router Bit

Spiral router bits are made by Amana Tool, the leading manufacturers of high quality wood cutting tools. Amana Tool 46100 SC Spiral Plunge 1/8 D x 1/2 CH x 1/4 SHK x 2 Inch Long 2 Flute Up-Cut Router Bit combines a shearing action in cutting with an... more

$23.75

go to store
Freud 1/4" (Dia.) Solid Carbide O-Flute Down Spiral Bit with 1/4" Shank (74-204)

Freud 1/4" (Dia.) Solid Carbide O-Flute Down Spiral Bit with 1/4" Shank (74-204)

O-Flute design delivers cooler cuts in plastic to avoid melting. 1/4" Overall Dia (D), 1/4" Shank, 2-1/2" Overall Length (H), 3/8" Cutting Length (h). Application: Smooth finish on solid surface and plastics such as ABS, UHMW, acrylic, nylon and... more

$19.72

go to store
Tru-Cut X100018 1/2-Inch Shank Fast Spiral Masonry Drill Bit with 18-Inch Length and 1-Inch Diameter

Tru-Cut X100018 1/2-Inch Shank Fast Spiral Masonry Drill Bit with 18-Inch Length and 1-Inch Diameter

Fast spiral drill bit is carbide tipped for drilling all masonry materials. Straight shank. Many lengths available with different diameter and shank sizes. more

$43.59

FREE shipping

go to store
Tru-Cut X25024 1/4-Inch Shank Fast Spiral Masonry Drill Bit with 24-Inch Length and 1/4-Inch Diameter

Tru-Cut X25024 1/4-Inch Shank Fast Spiral Masonry Drill Bit with 24-Inch Length and 1/4-Inch Diameter

Fast spiral drill bit is carbide tipped for drilling all masonry materials. Straight shank. Many lengths available with different diameter and shank sizes. more

$24.73

go to store
Bosch 85964M Solid Carbide 5/8-Inch x 1-1/2-Inch Up Spiral Triple Flute 5/8-Inch Shank Router Bit

Bosch 85964M Solid Carbide 5/8-Inch x 1-1/2-Inch Up Spiral Triple Flute 5/8-Inch Shank Router Bit

Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0 Hundredths Pounds, Manufacturer: Bosch more

$56.69

FREE shipping

go to store
Bosch 85980M Solid Carbide 3/4-Inch x 1-1/2-Inch Down Spiral Triple Flute 3/4-Inch Shank Router Bit

Bosch 85980M Solid Carbide 3/4-Inch x 1-1/2-Inch Down Spiral Triple Flute 3/4-Inch Shank Router Bit

Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0 Hundredths Pounds, Manufacturer: Bosch more

$20.45

go to store
Bosch 85978M Solid Carbide 5/8-Inch x 1-1/2-Inch Down Spiral Triple Flute 5/8-Inch Shank Router Bit

Bosch 85978M Solid Carbide 5/8-Inch x 1-1/2-Inch Down Spiral Triple Flute 5/8-Inch Shank Router Bit

Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0 Hundredths Pounds, Manufacturer: Bosch more

$51.22

FREE shipping

go to store
Bosch 85966M Solid Carbide 3/4-Inch x 1-1/2-Inch Up Spiral 3/4-Inch Shank Router Bit

Bosch 85966M Solid Carbide 3/4-Inch x 1-1/2-Inch Up Spiral 3/4-Inch Shank Router Bit

Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0 Hundredths Pounds, Manufacturer: Bosch more

$79.61

FREE shipping

go to store
Amana Tool 46188 CNC Compression Spiral for MDF and Laminate 2-Flute Solid Carbide Router Bit, 1/2-Inch Shank

Amana Tool 46188 CNC Compression Spiral for MDF and Laminate 2-Flute Solid Carbide Router Bit, 1/2-Inch Shank

Spiral router bits are made by Amana Tool, the leading manufacturers of high quality wood cutting tools. Amana Tool 46188 CNC Solid Carbide Compression Spiral 1/2 D x 1-1/4 CH x 1/2 SHK x 3 Inch Long Router Bit is designed for CNC applications... more

$67.63

FREE shipping

go to store
Bosch 85965M Solid Carbide 5/8-Inch x 2-Inch Up Spiral Triple Flute 5/8-Inch Shank Router Bit

Bosch 85965M Solid Carbide 5/8-Inch x 2-Inch Up Spiral Triple Flute 5/8-Inch Shank Router Bit

Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0 Hundredths Pounds, Manufacturer: Bosch more

$56.62

FREE shipping

go to store
Bosch 85981M Solid Carbide 3/4-Inch x 2-Inch Down Spiral Triple Flute 3/4-Inch Shank Router Bit

Bosch 85981M Solid Carbide 3/4-Inch x 2-Inch Down Spiral Triple Flute 3/4-Inch Shank Router Bit

Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0 Hundredths Pounds, Manufacturer: Bosch more

$67.40

FREE shipping

go to store
Bosch 85951M Solid Carbide 5/8-Inch x 1-1/2-Inch Down Spiral 5/8-Inch Shank Router Bit

Bosch 85951M Solid Carbide 5/8-Inch x 1-1/2-Inch Down Spiral 5/8-Inch Shank Router Bit

Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0 Hundredths Pounds, Manufacturer: Bosch more

$44.89

FREE shipping

go to store
Freud 1/2" (Dia.) Solid Carbide O-Flute Down Spiral Bit with 1/2" Shank (74-214)

Freud 1/2" (Dia.) Solid Carbide O-Flute Down Spiral Bit with 1/2" Shank (74-214)

O-Flute design delivers cooler cuts in plastic to avoid melting. 1/2" Overall Dia (D), 1-1/8" Cutting Length (h), 1/2" Shank, 3-1/2" Overall Length (H). Application: Smooth finish on solid surface and plastics such as ABS, UHMW, acrylic, nylon and... more

$94.35

FREE shipping

go to store
Freud 1/8" (Dia.) Solid Carbide O-Flute Up Spiral Bit with 1/4" Shank (73-762)

Freud 1/8" (Dia.) Solid Carbide O-Flute Up Spiral Bit with 1/4" Shank (73-762)

O-Flute design delivers cooler cuts in plastic to avoid melting. 1/8" Overall Dia (D), 1/4" Shank, 2" Overall Length (H), 1/2" Cutting Length (h). Application: Smooth finish on solid surface and plastics such as ABS, UHMW, acrylic, nylon and... more

$32.97

go to store
CMT 191.000.02 5-Piece Upcut Spiral Bit Set, 1/2-Inch Shank

CMT 191.000.02 5-Piece Upcut Spiral Bit Set, 1/2-Inch Shank

Our most popular solid carbide Spiral Bits at your fingertips in a safe, economical package! Upcut set including 3/16”, 1/4”, 5/16”, 3/8” and 1/2” bit diameters. Ideal for use on all soft and hard wood, plywood, laminates, MDF and plastic materials,... more

$179.40

FREE shipping

go to store
Freud 75-308 1/2-Inch x 2-Inch Triple Flute Up Spiral Bit (1/2-Inch Shank)

Freud 75-308 1/2-Inch x 2-Inch Triple Flute Up Spiral Bit (1/2-Inch Shank)

1/2"diameter Triple Flute Up Spiral Bit 2"carbide cut height 1/2"shank solid carbide. for cutting mortises,grooves, dadoes and routing deep blind holes with effective chip removal. more

$78.55

FREE shipping

go to store
Freud 3/8 (Dia.) Down Spiral Bit with 1/2 Shank (76-106)

Freud 3/8 (Dia.) Down Spiral Bit with 1/2 Shank (76-106)

Freud’s solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. 3/8" Overall Dia (D), 1-1/4" Cutting Length (h), 1/2" Shank, 3" Overall Length (H) Ideal For: Grooves in fine veneer & laminates.... more

$45.53

FREE shipping

go to store
Freud 76-110 1/2-Inch x 2-Inch Down Spiral Bit (1/2-Inch Shank)

Freud 76-110 1/2-Inch x 2-Inch Down Spiral Bit (1/2-Inch Shank)

Freud’s solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. 1/2" Overall Dia (D), 2" Cutting Length (h), 1/2" Shank, 4" Overall Length (H) Ideal For: Grooves in fine veneer & laminates.... more

$67.98

FREE shipping

go to store
Freud 1/2" (Dia.) Down Spiral Bit with 1/2" Shank (76-308)

Freud 1/2" (Dia.) Down Spiral Bit with 1/2" Shank (76-308)

Freud’s solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. 1/2" Overall Dia (D), 1-5/8" Cutting Length (h), 1/2" Shank, 4" Overall Length (H) Ideal For: Grooves in fine veneer & laminates.... more

$78.56

FREE shipping

go to store
Freud 75-202 5/32-Inch x 5/8-Inch Up Spiral Router Bit (1/4-Inch Shank)

Freud 75-202 5/32-Inch x 5/8-Inch Up Spiral Router Bit (1/4-Inch Shank)

Freud’s solid carbide up spiral bits combine effective chip removal with a cut that can’t be matched by standard straight bits. Ideal for production settings. 5/32" Overall Dia (D), 5/8" Cutting Length (h), 1/4" Shank, 2" Overall Length (H), 2 Flutes... more

$17.99

go to store
Freud 5/32" (Dia.) Down Spiral Bit with 1/4" Shank (76-202)

Freud 5/32" (Dia.) Down Spiral Bit with 1/4" Shank (76-202)

Freud’s solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. 5/32" Overall Dia (D), 5/8" Cutting Length (h), 1/4" Shank, 2" Overall Length (H) Ideal For: Grooves in fine veneer & laminates.... more

$17.08

go to store
Freud 76-109 1/2-Inch x 1-1/2-Inch Down Spiral Bit (1/2-Inch Shank)

Freud 76-109 1/2-Inch x 1-1/2-Inch Down Spiral Bit (1/2-Inch Shank)

Freud’s solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. 1/2" Overall Dia (D), 1-1/2" Cutting Length (h), 1/2" Shank, 4" Overall Length (H) Ideal For: Grooves in fine veneer & laminates.... more

$55.99

FREE shipping

go to store
Freud 75-105 3/8-Inch Diameter by 1-1/8-Inch Height 2 Flute Up Spiral Router Bit with 3/8-Inch Shank

Freud 75-105 3/8-Inch Diameter by 1-1/8-Inch Height 2 Flute Up Spiral Router Bit with 3/8-Inch Shank

Freud’s solid carbide up spiral bits combine effective chip removal with a cut that can’t be matched by standard straight bits. Ideal for production settings. 3/8" Overall Dia (D), 1-1/8" Cutting Length (h), 3/8" Shank, 3" Overall Length (H), 2 Flutes... more

$33.06

go to store
Freud 7/32" (Dia.) Down Spiral Bit with 1/4" Shank (76-204)

Freud 7/32" (Dia.) Down Spiral Bit with 1/4" Shank (76-204)

Freud’s solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. 7/32" Overall Dia (D), 3/4" Cutting Length (h), 1/4" Shank, 2" Overall Length (H) Ideal For: Grooves in fine veneer & laminates.... more

$18.58

go to store
Freud 3/8" (Dia.) Down Spiral Bit with 3/8" Shank (76-105)

Freud 3/8" (Dia.) Down Spiral Bit with 3/8" Shank (76-105)

Freud’s solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. 3/8" Overall Dia (D), 1-1/8" Cutting Length (h), 3/8" Shank, 3" Overall Length (H) Ideal For: Grooves in fine veneer & laminates.... more

$36.83

FREE shipping

go to store
Freud 3/16" (Dia.) Down Spiral Bit with 1/4" Shank (76-101)

Freud 3/16" (Dia.) Down Spiral Bit with 1/4" Shank (76-101)

Freud’s solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. 3/16" Overall Dia (D), 3/4" Cutting Length (h), 1/4" Shank, 2" Overall Length (H) Ideal For: Grooves in fine veneer & laminates.... more

$21.79

go to store
Freud 75-306 3/8-Inch Up Spiral Router Bit (1/2-Inch Shank)

Freud 75-306 3/8-Inch Up Spiral Router Bit (1/2-Inch Shank)

Freud’s solid carbide up spiral bits combine effective chip removal with a cut that can’t be matched by standard straight bits. Ideal for production settings. 3/8" Overall Dia (D), 1-1/4" Cutting Length (h), 1/2" Shank, 3" Overall Length (H), 3 Flutes... more

$59.76

FREE shipping

go to store
Freud 75-103 1/4-Inch x 3/4-Inch Up Spiral Router Bit (1/4-Inch Shank)

Freud 75-103 1/4-Inch x 3/4-Inch Up Spiral Router Bit (1/4-Inch Shank)

Freud’s solid carbide up spiral bits combine effective chip removal with a cut that can’t be matched by standard straight bits. Ideal for production settings. 1/4" Overall Dia (D), 3/4" Cutting Length (h), 1/4" Shank, 2" Overall Length (H), 2 Flutes... more

$19.97

go to store
Irwin Tools 5026022 Slow Spiral Flute Rotary Drill Bit for Mason, Drill Bit, 3/4" x 13"

Irwin Tools 5026022 Slow Spiral Flute Rotary Drill Bit for Mason, Drill Bit, 3/4" x 13"

Tungsten carbide tip is durable when drilling in concrete and brick. Deep single flute removes dust fast for increased drilling speed and longer bit life. Diamond ground tip has aggressive cutting angles for increased drilling speed. Fits all hammer... more

$20.59

go to store
Alfa Tools MDF60512 1/2" x 6" x 3/8" Carbide Fast Spiral Masonry Drill (6 Pack)

Alfa Tools MDF60512 1/2" x 6" x 3/8" Carbide Fast Spiral Masonry Drill (6 Pack)

Alfa Tools Masonry Drill Bits – Fast Spiral feature a heat treated shank for shock-proof rotary drilling. Fast spiral flutes clear dust quickly. Suitable for drilling in light to medium hard building materials, including dry concrete, masonry, brick,... more

$28.07

go to store

More information about Power Tools

Best prices on Spiral carbide bit in Power Tools. Check out Bizrate for great deals on popular brands like Amana Tool, Bosch and CMT. Use Bizrate's latest online shopping features to compare prices. Read product specifications, calculate tax and shipping charges, sort your results, and buy with confidence. Easily narrow your search and find the product that's perfect for you.