Best Seller
Bosch 85222M 3/4" Shank Carbide Tip Straight Router Bit, 3/4X2 Double Flute

Bosch 85222M 3/4" Shank Carbide Tip Straight Router Bit, 3/4X2 Double Flute

Find all the fasteners, tools, industrial, and safety products you need for less when you shop at D&S Industrial Fasteners. Make the switch today and save. more

$17.58

go to store
Freud 5/8 (Dia.) Wavy Joint Bit with 1/2 Shank (85-033)

Freud 5/8 (Dia.) Wavy Joint Bit with 1/2 Shank (85-033)

Waves formed in material accommodate more surface glue, creating a solid joint. 5/8" Overall Dia (D), 37/64" Small Dia (n), 1-13/16" Carbide Height (h), 1/2" Shank, 3-1/8" Overall Length (H), 1/8" Minor Height (m) Ideal For: Milling strong joints... more

$27.67

go to store
Best Seller
Amana Tool 47154 No-File Trim 1/2-Inch Dia x 3/8-Inch Cut Height x 0.015-Inch Radius x 1/4-Inch Shank 2-Flute Carbide Tipped Router Bit with Lower BB

Amana Tool 47154 No-File Trim 1/2-Inch Dia x 3/8-Inch Cut Height x 0.015-Inch Radius x 1/4-Inch Shank 2-Flute Carbide Tipped Router Bit with Lower BB

Trimming Router Bits are made by Amana Tool, the leading manufacturers of high quality wood cutting tools. Eliminate the time-consuming hand-filing that normally follows each trimming cut on a laminate job with Amana Tool 47154 Carbide Tipped No-File... more

$25.81

go to store
Freud 1-3/8In. Traditional Beading Bit 1/2In. Shank

Freud 1-3/8In. Traditional Beading Bit 1/2In. Shank

Freud's traditional beading bits will form a single bead with a square shoulder. These bits are used by many remodelers to match moldings in older houses. Covered by Freud's limited Limited Warranty. Contact Freud customer service for more details.. more

$34

compare prices
Freud Profile Stile & Rail Set

Freud Profile Stile & Rail Set

99-060 and 99-061 bits cope and stick cut the rails and stiles, and also can be used alone to form a matching edge profile. 99-062 cuts the panel slot and the back of the tongue on the coped piece. more

$46

compare prices
Freud 1In Roundover Bowl Bit

Freud 1In Roundover Bowl Bit

Specially formulated carbide is ideal for fabricating solid surface materials. more

$70

compare prices
Freud Rabbeting 32-100 Router Bit

Freud Rabbeting 32-100 Router Bit

1/2 more

$18

compare prices
Freud 99-015 Face Moulding Bit

Freud 99-015 Face Moulding Bit

Carbide tipped. For decorative edging on furniture and cabinets. These give your door casings, trim, baseboards, and pilasters an architectural appearance. 1 1 16 in. diameter x 1 5 8 in.. 1 2 in. shank. more

$25

compare prices
Bosch 85495M 1-1/8 in. Carbide Tipped Beading Bit

Bosch 85495M 1-1/8 in. Carbide Tipped Beading Bit

For decorative edging and window sash. Carbide tipped. Shank diameter 1 4 in., shank length 1 1 4 in., and boring diameter 3 8 in.. No. 85493M: 7 8 in. overall diameter, 31 64 in. flute length, 2 1 16 in. overall length, 3 16 in. cutting radius No. 85494M more

$17

compare prices
Amana 45465 Flush Trim

Amana 45465 Flush Trim

With: Upper Ball Bearing more

$52

compare prices
Bosch HC2122 SDS+ Rotary Hammer Bits

Bosch HC2122 SDS+ Rotary Hammer Bits

Bosch 3/4" x 6" x 8" OAL SDS+ Carbide-Tipped Masonry Drill Bit more

$13

compare prices
Freud 96-102 Router Bit Set

Freud 96-102 Router Bit Set

For Incra Jig - 8 Piece more

$110

compare prices
Freud Bevel Bowl Bit

Freud Bevel Bowl Bit

Specially formulated carbide is ideal for fabricating solid surface materials. more

$58

compare prices
Freud Beadboard Tongue & Groove

Freud Beadboard Tongue & Groove

Freud's new Beadboard Tongue and Groove System mills perfect beadboard in a variety of thicknesses from 3/8in. to 3/4in., and in almost any width. Mill beadboard from any hardwood or softwood, and use it to create a beautiful effect as wainscoting,... more

$49

compare prices
Freud 99-037 Finger Joint Router Bit

Freud 99-037 Finger Joint Router Bit

Carbide tipped. Computer balanced. Overall diameter 1 3 8 in.. 1 2 in. shank. more

$89

compare prices
Freud 18-102 Round Nose Bit

Freud 18-102 Round Nose Bit

3/16 more

$17

compare prices
Freud 18-110 Round Nose Bit

Freud 18-110 Round Nose Bit

5/8 more

$25

compare prices
Freud 16-102 Mortising Bit

Freud 16-102 Mortising Bit

5/8 more

$16

compare prices
Freud 18-126 1-in Round Nose Router Bit

Freud 18-126 1-in Round Nose Router Bit

1-in Round Nose Router Bit - 18-126 more

$44

compare prices
Freud 18-130 Round Nose Bit

Freud 18-130 Round Nose Bit

1-1/4 more

$29

compare prices
Freud 1-3/4In. Chamfer Bit 1/4In. Shank

Freud 1-3/4In. Chamfer Bit 1/4In. Shank

Creates a uniform chamfer on the edge of any work piece to add character, while retaining crisp geometric lines. more

$32

compare prices
Freud Raised Panel V Joint Bit

Freud Raised Panel V Joint Bit

Mating surfaces are at an angle, not vertical, so the dark lines like those created by standard finger joint bits arenot visible. more

$81

compare prices
Freud 30-114 Cove Bit

Freud 30-114 Cove Bit

1/2 more

$32

compare prices
Freud 1-1/4" (Dia.) Rabbeting Bit with 1/4" Shank (32-302)

Freud 1-1/4" (Dia.) Rabbeting Bit with 1/4" Shank (32-302)

Produces super smooth cuts on both surfaces of the rabbet. 1-1/4" Overall Dia (D), 3/8" Carbide Height (h), 1/4" Shank, 1-7/8" Overall Length (H), 1/2" Bearing Dia (B), 3/8" Cut Depth (C) Ideal For: Joinery and cabinetry applications. Application:... more

$27.97

go to store
Amana Tool 45780 Carving and Engraving 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank

Amana Tool 45780 Carving and Engraving 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank

Industrial Quality Signmaking, Lettering, V Groove Miter Fold & Mini Router Bits are made by Amana Tool, the leading manufacturers of high-quality wood-cutting tools. For fine-line "engraving" in different materials, use Amana Tool 45780 Solid Carbide... more

$22.70

go to store
Yonico 31262-SC Yonico 31262-SC CNC Router Bit Up Cut Solid Carbide 1/2" X 1-5/16" X 1/2" X 3" 1/2" Shank, ,

Yonico 31262-SC Yonico 31262-SC CNC Router Bit Up Cut Solid Carbide 1/2" X 1-5/16" X 1/2" X 3" 1/2" Shank, ,

Best used for: Standard milling, dadoing, and boring.• Cutting Diameter: 1/2" • Cutting Height: 1-5/16" • Shank Diameter: 1/2" • Overall Length: 3" • Flutes: 2 Up-cut end mills direct woodchips up and away from the milling area leaving an unobstructed... more

$39.95

FREE shipping

go to store
Freud 1" (Dia.) No Drip Edge Bit with 1/2 Shank (85-011)

Freud 1" (Dia.) No Drip Edge Bit with 1/2 Shank (85-011)

Specially formulated carbide is ideal for fabricating solid surface materials. 1" Overall Dia (D), 3/4" Carbide Height (h), 1/2" Shank, 2-13/16" Overall Length (H), 3/8" Large Radius (R1), 1/4" Small Radius (R2), 9/64" Minor Height (m) Ideal For:... more

$55.19

FREE shipping

go to store
Yonico 31260-SC CNC Router Bit Up Cut Solid Carbide with 1/2" Shank, 7/16" x 1-1/4" x 1/2" x 3"

Yonico 31260-SC CNC Router Bit Up Cut Solid Carbide with 1/2" Shank, 7/16" x 1-1/4" x 1/2" x 3"

Best used for: Standard milling, dadoing, and boring.• Cutting Diameter: 7/16" • Cutting Height: 1-1/4" • Shank Diameter: 1/2" • Overall Length: 3" • Flutes: 2 Up-cut end mills direct woodchips up and away from the milling area leaving an unobstructed... more

$39.95

FREE shipping

go to store
CMT 192.001.11 Solid Carbide Downcut Spiral Bit, 1/8-Inch Diameter by 2-Inch Length, 1/4-Inch Shank

CMT 192.001.11 Solid Carbide Downcut Spiral Bit, 1/8-Inch Diameter by 2-Inch Length, 1/4-Inch Shank

Sharp technology with a new twist! This downcut spiral bit is made of a special super-micrograin carbide formula which makes the cutting edges very sharp. The new low-angle spiral is designed to shear wood cleanly and provide excellent chip ejection.... more

$17.16

FREE shipping

go to store
Yonico 32230-SC Yonico 32230-SC CNC Router Bit Down Cut Solid Carbide End Mill 3/8" X 1" X 3/8" X 2-1/2" 3/8" Shank, ,

Yonico 32230-SC Yonico 32230-SC CNC Router Bit Down Cut Solid Carbide End Mill 3/8" X 1" X 3/8" X 2-1/2" 3/8" Shank, ,

Best used for: Laminate or veneer-finish plunging and dadoing.• Cutting Diameter: 3/8" • Cutting Height: 1" • Shank Diameter: 3/8" • Overall Length: 2-1/2" • Flutes: 2 Down cut end mills shear in a downward direction causing the uppermost layer of the... more

$24.95

go to store
Freud TH80070R Industrial Carbide Tipped Through Hole Boring Bit Right Hand- 8mm Diameter- 10mm Shank- 70mm Length

Freud TH80070R Industrial Carbide Tipped Through Hole Boring Bit Right Hand- 8mm Diameter- 10mm Shank- 70mm Length

8mm diameter, 70mm overall length, 35mm max hole depth, 60° point, right hand rotation, 10mm shank. The 70mm long bits have a 10mm x 20mm shank making them compatible with most boring machines. Drills all composition materials, solid surface materials,... more

$15.19

go to store
Yukon Tool YTRB245 24-Piece 1/2-Inch Shank Carbide Router Bit Set

Yukon Tool YTRB245 24-Piece 1/2-Inch Shank Carbide Router Bit Set

Carbide router bits, razor sharp, set of 24 All bits have 1/2" shank Set includes v-groove, flush, chamfer, dovetail bits and more Use on hand held and table-mounted routers Set comes in a protective wooden case, Weight: 401 Hundredths Pounds,... more

$89.66

FREE shipping

go to store
Freud 3/8 Radius Cove Bit with Steel Pilot with 1/4 Shank (30-404)

Freud 3/8 Radius Cove Bit with Steel Pilot with 1/4 Shank (30-404)

Produce a classical cove profile, or remove the steel pilot to add the versatility of routing grooves or deeper coves. Freud's upward shear angle gives a more efficient smoother cut. 1-1/4" Overall Dia (D), 7/16" Carbide Height (h), 1/4" Shank, 3/8"... more

$31.40

go to store
Timberline 260-10 Rabbeting Router Bit 1-1/4-Inch Diameter by 1/2-Inch Cutting Height by 3/8 Rabbet Depth by 1/4-Inch Shank Carbide Tipped Router Bit

Timberline 260-10 Rabbeting Router Bit 1-1/4-Inch Diameter by 1/2-Inch Cutting Height by 3/8 Rabbet Depth by 1/4-Inch Shank Carbide Tipped Router Bit

Timberline 260-10 TIMBERLINE RABBET BIT 1/4 SHK more

$19.18

go to store
Freud 7640R 4-Millimeter by 55-Millimeter Right Turn 4-Millimeter Shank Solid Carbide Drill Bit

Freud 7640R 4-Millimeter by 55-Millimeter Right Turn 4-Millimeter Shank Solid Carbide Drill Bit

Solid Carbide Drill Bit more

$18.03

go to store
Amana Tool 49516 Corner Round 1-1/2-Inch Diameter by 3/4-Inch Cut Height by 1/2-Inch Radius by 1/4-Inch Shank Carbide Tipped Router Bit

Amana Tool 49516 Corner Round 1-1/2-Inch Diameter by 3/4-Inch Cut Height by 1/2-Inch Radius by 1/4-Inch Shank Carbide Tipped Router Bit

Corner Rounding Router Bits with Ball Bearing Guide more

$30.75

go to store
Amana Tool 45460-S Dado Clean-Out with Ball Bearing Guide 1/2-Inch Diameter by 1/4-Inch Cutting Height by 1/4-Inch Shank Carbide Tipped Router Bit

Amana Tool 45460-S Dado Clean-Out with Ball Bearing Guide 1/2-Inch Diameter by 1/4-Inch Cutting Height by 1/4-Inch Shank Carbide Tipped Router Bit

Flush Trim Plunge Template Router Bits w/ Upper Ball Bearing more

$27.93

go to store
Champion CM97-1x17x22 Proline Spline Shank Hammer Bit Carbide Single Point, 1-Inch by 17-Inch by 22-Inch

Champion CM97-1x17x22 Proline Spline Shank Hammer Bit Carbide Single Point, 1-Inch by 17-Inch by 22-Inch

CM97 SDS Spline Shank Hammer Bit has a self-starting carbide single tip for swift penetration There is a reinforced flute geometry which reduces vibration, transfers more impact energy to the cutting face, and quickly channels debris The balance of tip... more

$41.58

FREE shipping

go to store
Champion CM97-1-3/4x17x22 Proline Spline Shank Hammer Bit Carbide Single Point, 1-3/4-Inch by 17-Inch by 22-Inch

Champion CM97-1-3/4x17x22 Proline Spline Shank Hammer Bit Carbide Single Point, 1-3/4-Inch by 17-Inch by 22-Inch

CM97 SDS Spline Shank Hammer Bit has a self-starting carbide single tip for swift penetration There is a reinforced flute geometry which reduces vibration, transfers more impact energy to the cutting face, and quickly channels debris The balance of tip... more

$131.64

FREE shipping

go to store
Amana Tool 45420 Straight Plunge 1/2-Inch Diameter by 1-1/4-Inch Cutting Height by 2-Flute 1/2-Inch Shank Carbide Tipped Router Bit

Amana Tool 45420 Straight Plunge 1/2-Inch Diameter by 1-1/4-Inch Cutting Height by 2-Flute 1/2-Inch Shank Carbide Tipped Router Bit

Straight Plunge Cutting Router Bits-1/2 Shank-2 Flute - High Production more

$17.53

go to store

More information about Power Tools

Best prices on Shank carbide bit in Power Tools. Check out Bizrate for great deals on popular brands like Amana Tool, Bosch and CMT. Use Bizrate's latest online shopping features to compare prices. Read product specifications, calculate tax and shipping charges, sort your results, and buy with confidence. Easily narrow your search and find the product that's perfect for you.