Best Seller
CMT 192.001.11 Solid Carbide Downcut Spiral Bit, 1/8-Inch Diameter by 2-Inch Length, 1/4-Inch Shank

CMT 192.001.11 Solid Carbide Downcut Spiral Bit, 1/8-Inch Diameter by 2-Inch Length, 1/4-Inch Shank

Sharp technology with a new twist! This downcut spiral bit is made of a special super-micrograin carbide formula which makes the cutting edges very sharp. The new low-angle spiral is designed to shear wood cleanly and provide excellent chip ejection.... more

$18.19

go to store
Freud 75-508 Flush Trim Upcut Spiral Solid Carbide Router Bit 1/2" Diameter 1/2" Shank With TiCo Hi-Density Carbide

Freud 75-508 Flush Trim Upcut Spiral Solid Carbide Router Bit 1/2" Diameter 1/2" Shank With TiCo Hi-Density Carbide

1/2" Diameter X 2" Height 3-Flute Up Spiral Router Bit with 1/2" Shank more

$90.29

FREE shipping

go to store
Best Seller
CMT 198.008.11 Solid Carbide Spiral Bit, 1/4-Inch Diameter, 1/4-Inch Shank

CMT 198.008.11 Solid Carbide Spiral Bit, 1/4-Inch Diameter, 1/4-Inch Shank

Solid Carbide 1-Edge Spiral Bit for cutting, copying, panel sizing and any routing applications in solid wood, or wood composites, plastic materials and laminates. High feed speed on well-clamped workpiece. Can used on maching centres, point to point... more

$18.78

go to store
Freud 75-106 2-Flute Up Spiral Spiral Router Bit

Freud 75-106 2-Flute Up Spiral Spiral Router Bit

3/8 in. Diameter - 1 1/4 in. Carbide Height - 1/2 in. Shank more

$42

compare prices
Freud 75102 Router Bit

Freud 75102 Router Bit

Diameter: 0.25 in - Carbide Height: 1 in - Shank: 0.25 in more

$20

compare prices
Bosch Spiral Router Bit

Bosch Spiral Router Bit

Bosch router bits are distinguished for their careful selection of materials, exactly calculated cutting geometry, Extended bit life, extra sharp cutting edges and low vibration. more

$51

compare prices
Bosch 85914M 1/2 in. Solid Carbide Double Flute Up Spiral

Bosch 85914M 1/2 in. Solid Carbide Double Flute Up Spiral

Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Manufacturer: Bosch more

$46

compare prices
Bosch 85912M 3/8" Upspiral with 3/8" Shank

Bosch 85912M 3/8" Upspiral with 3/8" Shank

3/8" Upspiral with 3/8" Shank Bosch parts keep your tools working their best for any application you can come up with. more

$24

compare prices
Bosch Upspiral Router Bit

Bosch Upspiral Router Bit

Bosch router bits are distinguished for their careful selection of materials, exactly calculated cutting geometry, Extended bit life, extra sharp cutting edges and low vibration. We offer more than 500 items in solid carbide, carbide tipped and high... more

$22

compare prices
Bosch 85918M 1/2" Downspiral with 1/2" Shank

Bosch 85918M 1/2" Downspiral with 1/2" Shank

1/2" Downspiral with 1/2" Shank Bosch parts keep your tools working their best for any application you can come up with. more

$51

compare prices
Bosch 85905M 3/8" Downspiral with 1/2" Shank

Bosch 85905M 3/8" Downspiral with 1/2" Shank

3/8" Downspiral with 1/2" Shank Bosch parts keep your tools working their best for any application you can come up with. more

$42

compare prices
Freud 3/16In. Up Spiral Bit

Freud 3/16In. Up Spiral Bit

Freud's solid carbide up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Ideal for production settings. more

$18

compare prices
Freud 1/2In.Down Spiral Double Flute 1/2In. Shank

Freud 1/2In.Down Spiral Double Flute 1/2In. Shank

Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. more

$55

compare prices
Freud 1/4 X 3/4 Down Spiral Bit

Freud 1/4 X 3/4 Down Spiral Bit

Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. more

$17

compare prices
Freud 1/8 Down Spiral Bit

Freud 1/8 Down Spiral Bit

Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. more

$18

compare prices
Freud 76-102 2-Flute Down Spiral Router Bit

Freud 76-102 2-Flute Down Spiral Router Bit

1/4 in. Diameter with 1/4 in. Shank more

$21

compare prices
Freud 1/8In. Up Spiral Double Flute 1/4In. Shank

Freud 1/8In. Up Spiral Double Flute 1/4In. Shank

Freud's solid carbide up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Ideal for production settings. more

$19

compare prices
Bosch 3/16 in. x 6 in. Blue Granite Turbo Carbide Set HCBG0405T  Bit

Bosch 3/16 in. x 6 in. Blue Granite Turbo Carbide Set HCBG0405T Bit

The Bosch Blue Granite Bit are optimized for drilling in masonry and concrete. It features a revolutionary PowerGrip TM Round Shank that eliminates shank slippage and delivers superior performance. more

$15

compare prices
Bosch 1/8 in. x 2 in. x 3 in. Blue Granite Turbo Hammer Drill Bit (25-Pack) HCBG01B25T

Bosch 1/8 in. x 2 in. x 3 in. Blue Granite Turbo Hammer Drill Bit (25-Pack) HCBG01B25T

Bosch BlueGranite Turbo bits begin with the aggressive holds achieved on the PowerGrip shank. more

$48

compare prices
CMT 198.504.11 Solid Carbide Spiral Bit, 3/8-Inch Diameter, 3/8-Inch Shank

CMT 198.504.11 Solid Carbide Spiral Bit, 3/8-Inch Diameter, 3/8-Inch Shank

Solid Carbide 1-Edge Spiral Bit for cutting, copying, panel sizing and any routing applications in solid wood, or wood composites, plastic materials and laminates. High feed speed on well-clamped workpiece. Can used on maching centres, point to point... more

$50.67

FREE shipping

go to store
CMT 198.007.11 Solid Carbide Spiral Bit, 1/4-Inch Diameter, 1/4-Inch Shank

CMT 198.007.11 Solid Carbide Spiral Bit, 1/4-Inch Diameter, 1/4-Inch Shank

Solid Carbide 1-Edge Spiral Bit for cutting, copying, panel sizing and any routing applications in solid wood, or wood composites, plastic materials and laminates. High feed speed on well-clamped workpiece. Can used on maching centres, point to point... more

$18.20

go to store
CMT 198.005.11 Solid Carbide Spiral Bit, 3/16-Inch Diameter, 3/16-Inch Shank

CMT 198.005.11 Solid Carbide Spiral Bit, 3/16-Inch Diameter, 3/16-Inch Shank

Solid Carbide 1-Edge Spiral Bit for cutting, copying, panel sizing and any routing applications in solid wood, or wood composites, plastic materials and laminates. High feed speed on well-clamped workpiece. Can used on maching centres, point to point... more

$19.23

go to store
MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set, 3-Piece

MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set, 3-Piece

Three solid micro grain carbide bits for fast, smooth cuts and an edge that stays sharp longer. Spiral bits produce a very clean and accurate cut with minimal chatter. Upcut spiral helps remove material from the groove. They work well for deep... more

$79.02

FREE shipping

go to store
CMT 198.001.11 Solid Carbide Spiral Bit, 1/8-Inch Diameter, 1/8-Inch Shank

CMT 198.001.11 Solid Carbide Spiral Bit, 1/8-Inch Diameter, 1/8-Inch Shank

Solid Carbide 1-Edge Spiral Bit for cutting, copying, panel sizing and any routing applications in solid wood, or wood composites, plastic materials and laminates. High feed speed on well-clamped workpiece. Can used on maching centres, point to point... more

$18.19

go to store
Trend INLAY/KIT/A Carbide Spiral Bit and Bushing Kit for Inlay Templates

Trend INLAY/KIT/A Carbide Spiral Bit and Bushing Kit for Inlay Templates

A spiral down cut bit and steel guide bush 1/8-Inch solid carbide spiral down cut bit 5/16-Inch steel bushing wit collar for both cuts Use with inlay templates, Manufacturer: Trend more

$39.00

FREE shipping

go to store
CMT 196.506.11 Solid Carbide Downcut Spiral Bit & Chipbreaker, 1/2-Inch Diameter

CMT 196.506.11 Solid Carbide Downcut Spiral Bit & Chipbreaker, 1/2-Inch Diameter

Sharp technology with a new twist! This downcut spiral bit with chipbreaker is made of a special super-micrograin carbide formula which makes the cutting edges very sharp. The new low-angle spiral is designed to shear wood cleanly and provide excellent... more

$103.03

FREE shipping

go to store
CMT 192.503.11 Solid Carbide Downcut Spiral Bit, 3/8-Inch Diameter by 3-Inch Length, 1/2-Inch Shank

CMT 192.503.11 Solid Carbide Downcut Spiral Bit, 3/8-Inch Diameter by 3-Inch Length, 1/2-Inch Shank

Sharp technology with a new twist! This downcut spiral bit is made of a special super-micrograin carbide formula which makes the cutting edges very sharp. The new low-angle spiral is designed to shear wood cleanly and provide excellent chip ejection.... more

$54.10

FREE shipping

go to store
MLCS 7467 3/8-Inch Diameter Solid Carbide Upcut Spiral Router Bit

MLCS 7467 3/8-Inch Diameter Solid Carbide Upcut Spiral Router Bit

Solid micro grain carbide cuts smooth and stays sharp Up cut 3/8-Inch Diameter 1/2-Inch shank Perfect for shallow mortises, grooves, dadoes, rabbets and plunge cuts MLCS quality guaranteed, Weight: 22 Hundredths Pounds, Manufacturer: MLCS more

$35.83

FREE shipping

go to store
MLCS 7468 1/2-Inch Diameter Solid Carbide Upcut Spiral Router Bit

MLCS 7468 1/2-Inch Diameter Solid Carbide Upcut Spiral Router Bit

Solid micro grain carbide cuts smooth and stays sharp Up cut 1/2-Inch Diameter 1/2-Inch shank Perfect for shallow mortises, grooves, dadoes, rabbets and plunge cuts MLCS quality guaranteed, Weight: 26 Hundredths Pounds, Manufacturer: MLCS more

$47.00

FREE shipping

go to store
Irwin Tools 1901027 Marples Carbide Up-Spiral Router Bit with 1/4" x 1"

Irwin Tools 1901027 Marples Carbide Up-Spiral Router Bit with 1/4" x 1"

The IRWIN Marples Up-Spiral Router Bit is crafted to make deep mortises, dadoes, and grooves. With less vibration than straight router bits, this woodworking router bit can be used as a plunge cutter and leaves a smooth bottom edge and a rounded top edge. more

$19.98

go to store
CMT 191.001.11 Solid Carbide Upcut Spiral Bit, 1/8-Inch Diameter by 2-Inch Length, 1/4-Inch Shank

CMT 191.001.11 Solid Carbide Upcut Spiral Bit, 1/8-Inch Diameter by 2-Inch Length, 1/4-Inch Shank

Sharp technology with a new twist! This upcut spiral bit is made of a special super-micrograin carbide formula which makes the cutting edges very sharp. The new low-angle spiral is designed to shear wood cleanly and provide excellent chip ejection. As... more

$17.18

FREE shipping

go to store
CMT 191.507.11 Solid Carbide Upcut Spiral Bit, 1/2-Inch Diameter by 4-Inch Length, 1/2-Inch Shank

CMT 191.507.11 Solid Carbide Upcut Spiral Bit, 1/2-Inch Diameter by 4-Inch Length, 1/2-Inch Shank

Sharp technology with a new twist! This upcut spiral bit is made of a special super-micrograin carbide formula which makes the cutting edges very sharp. The new low-angle spiral is designed to shear wood cleanly and provide excellent chip ejection. As... more

$51.87

FREE shipping

go to store
CMT 192.005.11 Solid Carbide Down Spiral Bit, 3/16-Inch Diameter by 2-Inch Length, 1/4-Inch Shank

CMT 192.005.11 Solid Carbide Down Spiral Bit, 3/16-Inch Diameter by 2-Inch Length, 1/4-Inch Shank

Sharp technology with a new twist! This downcut spiral bit is made of a special super-micrograin carbide formula which makes the cutting edges very sharp. The new low-angle spiral is designed to shear wood cleanly and provide excellent chip ejection.... more

$22.90

go to store
CMT 191.008.11 Solid Carbide Upcut Spiral Bit, 1/4-Inch Diameter by 2-1/2-Inch Length, 1/4-Inch Shank

CMT 191.008.11 Solid Carbide Upcut Spiral Bit, 1/4-Inch Diameter by 2-1/2-Inch Length, 1/4-Inch Shank

Sharp technology with a new twist! This upcut spiral bit is made of a special super-micrograin carbide formula which makes the cutting edges very sharp. The new low-angle spiral is designed to shear wood cleanly and provide excellent chip ejection. As... more

$17.40

go to store
CMT 191.003.11 Solid Carbide Upcut Spiral Bit, 5/32-Inch Diameter by 2-Inch Length, 1/4-Inch Shank

CMT 191.003.11 Solid Carbide Upcut Spiral Bit, 5/32-Inch Diameter by 2-Inch Length, 1/4-Inch Shank

Sharp technology with a new twist! This upcut spiral bit is made of a special super-micrograin carbide formula which makes the cutting edges very sharp. The new low-angle spiral is designed to shear wood cleanly and provide excellent chip ejection. As... more

$17.30

go to store
CMT 191.501.11 Solid Carbide Upcut Spiral Bit, 5/16-Inch Diameter by 3-Inch Length, 1/2-Inch Shank

CMT 191.501.11 Solid Carbide Upcut Spiral Bit, 5/16-Inch Diameter by 3-Inch Length, 1/2-Inch Shank

Sharp technology with a new twist! This upcut spiral bit is made of a special super-micrograin carbide formula which makes the cutting edges very sharp. The new low-angle spiral is designed to shear wood cleanly and provide excellent chip ejection. As... more

$58.90

FREE shipping

go to store
CMT 191.509.11 Solid Carbide Upcut Spiral Bit, 5/8-Inch Diameter by 4-5/16-Inch Length, 5/8-Inch Shank

CMT 191.509.11 Solid Carbide Upcut Spiral Bit, 5/8-Inch Diameter by 4-5/16-Inch Length, 5/8-Inch Shank

Sharp technology with a new twist! This upcut spiral bit is made of a special super-micrograin carbide formula which makes the cutting edges very sharp. The new low-angle spiral is designed to shear wood cleanly and provide excellent chip ejection. As... more

$18.65

go to store
CMT 191.005.11 Solid Carbide Upcut Spiral Bit, 3/16-Inch Diameter by 2-Inch Length, 1/4-Inch Shank

CMT 191.005.11 Solid Carbide Upcut Spiral Bit, 3/16-Inch Diameter by 2-Inch Length, 1/4-Inch Shank

Sharp technology with a new twist! This upcut spiral bit is made of a special super-micrograin carbide formula which makes the cutting edges very sharp. The new low-angle spiral is designed to shear wood cleanly and provide excellent chip ejection. As... more

$18.84

go to store
CMT 191.503.11 Solid Carbide Upcut Spiral Bit, 3/8-Inch Diameter by 3-Inch Length, 1/2-Inch Shank

CMT 191.503.11 Solid Carbide Upcut Spiral Bit, 3/8-Inch Diameter by 3-Inch Length, 1/2-Inch Shank

Sharp technology with a new twist! This upcut spiral bit is made of a special super-micrograin carbide formula which makes the cutting edges very sharp. The new low-angle spiral is designed to shear wood cleanly and provide excellent chip ejection. As... more

$49.61

FREE shipping

go to store
CMT 192.007.11 Solid Carbide Downcut Spiral Bit, 1/4-Inch Diameter by 2-Inch Length, 1/4-Inch Shank

CMT 192.007.11 Solid Carbide Downcut Spiral Bit, 1/4-Inch Diameter by 2-Inch Length, 1/4-Inch Shank

Sharp technology with a new twist! This downcut spiral bit is made of a special super-micrograin carbide formula which makes the cutting edges very sharp. The new low-angle spiral is designed to shear wood cleanly and provide excellent chip ejection.... more

$17.87

go to store

More information about Power Tools

Best prices on Spiral carbide bit in Power Tools. Check out Bizrate for great deals on popular brands like Amana Tool, Bosch and CMT. Use Bizrate's latest online shopping features to compare prices. Read product specifications, calculate tax and shipping charges, sort your results, and buy with confidence. Easily narrow your search and find the product that's perfect for you.