Denon receiver watts Receivers

you're in Receivers, see other matches in:

Advertisement
Advertisement
sort by:
add tax & shipping for
 
 
 

starting at

$320
  • product
If Dolby Digital decoding and downsizing your dinero deficit are two of your priorities, check out Denon's affordable AVR-1600. It offers the built-in decoding as well as the upgradability afforded by a battery of input jacks. Key features include 5.1-channel inputs, allowing connection with future decoders or processors, such as a DTS box. You also get pre-outs for the front three channels, so you can boost your amp power later (the unit sends 60 watts to the main channels). Denon has provided for music as well as home-theater listening. A mode paradoxically termed "5-channel stereo" provides music through your fronts and surrounds -- even mixing left and right and guiding it through the center channel. You'll find a gaggle of inputs and outputs around back, including a moving-magnet phono jack for vinyl. Video connectivity is limited to composite sources, so your S-video components will have to stand alone.You also get a pair of front-channel pre-outs for listening in another room, an AM/FM tuner with 40 presets, and a pre-programmed remote control.

starting at

$320
 

starting at

$150
  • product
The Denon AVR 589 Home Theater Receiver is a 5.1 channel amplifier system with each channel delivering 75 Watts of output. Integrating multiple decoders and precision 32-bit floating point DSP surround sound processor the Denon AVR 589 AV Receiver is all that you need for complete sonic reproduction. The Audyssey MultEQ six-point acoustic correction technology and room calibration system ensure rich bass and smooth tonal balance even at low volume levels. Integrating two v1.3a HDMI digital video inputs and one HDMI output the Denon AVR-589 5.1-channel Surround Receiver offers on-board video up-conversion to the highest 1080p resolution and flexibility to connect peripherals.

starting at

$150
 

starting at

$179
  • product
With the 7-channel amplifier section on the Denon AVR-1609 AV Receiver, you can drive a 7.1 multi-channel speaker system for enhanced surround sound. Designed with HDMI v1.3a digital video signal pass-through technology, the AVR1609 comes with two HDMI inputs and one HDMI output, to run HDTV display at full 1080p resolution. It features latest surround decoders, including Dolby Digital Surround EX, Dolby Pro Logic IIx, and DTS ES. Equipped with the XM tuner ready functionality, this Denon receiver allows you to tune into Sirius satellite radio easily. The Denon AVR1609 Home Theater Receiver’s dimensions are 17.1 x 6.7 x 14.9 inches (W x H x D) and weighs 24.9 lbs.

starting at

$179
 
store rating:
  • product
Denon 5.1 CH A/V Home Theater Receiver In Black - AVR1610/ Dolby's NEW Pro Logic IIz Decoding/ 75 Watts Per Channel/ Dolby TrueHD/ DTS-HD Master Audio/ 3 HDMI Inputs/ 2 HD-Compatible Component Inputs/ 2 Coaxial Inputs/ 2 Optical Inputs/ Front Panel A/V...
at
 

starting at

$279
  • product
The DRA-397 stereo receiver supplies superior performance to other receivers in its class. Using Signal Level Divided Construction, it can deliver power and crystal clear sound to loudspeakers of varying types. Armed with key features such as composite video switching, a record output selector, serial IR remote ports and a phono input to name a few, the DRA-397 can cover a wide range of input source and control requirements, making this receiver the right choice as the heart of a great stereo/multi-zone system.

starting at

$279
28%off
 
store rating:
  • product
Once again, Denon advances the state-of-the-art in home theater surround sound with the AVR-4810CI, with nine on-board amplifier channels each rated at a robust 140 watts. The multi-mono block amp construction ensures top audio fidelity, and the Free...
at
 
store rating:
  • product
home theater receiver 90 watts x 7 ,Dolby TrueHD and DTS-HD(tm) Master Audio high-resolution surround decoding,Anchor Bay Technologies video processing and scaling with analog-to-HDMI upconversion (up to 1080p)
 

starting at

$212
  • product
It's not surround but it is stereo and delivers great sound for a home-theater system not ready to set up more than 2 speakers in a room. Discrete Source select Speaker A/B Selector Preamp output Tone controls and tone control defeat Record out selector IR Remote input/outputs AM/FM/FM Stereo tuner with up to 56-station auto preset FM memory XM Satellite Radio Ready - Connect and Play system (optional XM subscription required) Dedicated iPod (audio/photo/video) input (for use with optional ASD-1R iPod Dock), with front panel display and remote control New S-Series Simple Remote Control

starting at

$212
 
store rating:
  • product
This 7.1-channel, 875-watt receiver is equipped with 4 HDMI inputs, SIRIUS Satellite Radio readiness and support for a host of surround sound decoders, making it an ideal centerpiece for your movies, music and more.
at
 

starting at

$3,625
  • product
150 watts x 7 into 8 ohms (20-20,000 Hz) at 0.05% THD * THX Ultra2 certification * Silicon Optix Realta HQV video processing and scaling * Audyssey Laboratories' MultEQ XT eight-point auto setup and room calibration system (microphone included) * built-in Wi-Fi for music and JPEG streaming from a PC network * XM Satellite Radio Ready with decoding for XM's HD Surround channels (requires XM subscription and optional XM Mini-Tuner package) *

starting at

$3,625
 

starting at

$748
  • product
For high quality surround sound experience the Denon AVR989 7.1 Channel Home Theater Receiver with Dolby Digital Surround EX Dolby Pro Logic IIx and DTS ES is the perfect one. The Denon AVR989 AV Receiver features Audyssey’s Dynamic Volume a volume-leveling system which automatically eliminates jarring volume jumps between TV shows and commercials. Equipped with four HDMI inputs and one HDMI output all boasting v1.3a specification and up to 1080p resolution the Denon AVR-989 Receiver enhances video switching and up-conversion capability. Integrated with internal amplifiers the Denon AVR989 AV Receiver provides high-power output capability per channel. The Denon AVR989 Receiver measures 17.1 x 6.7 x 16.3 inches (W x H x D) and weighs 28.2 lbs.

starting at

$748
 

starting at

$211
  • product
50 watts x 2 (stereo) into 8 ohms (20-20,000 Hz) at 0.08% THD * 4-ohm capability allows use with a wide range of speakers * Signal Level Divided Construction chassis for maximum signal purity * XM Satellite Radio Ready (requires XM subscription and optional XM Mini-Tuner package) * iPod integration (requires optional Denon ASD-1R) *

starting at

$211
 

starting at

$420
  • product
Enjoy extreme HD video experience with the Denon AVR-789 7.1 Channel Home Theater Receiver incorporated with HDMI v1.3a capabilities. Integrating Faroudja DCDi processing and upconversion the Denon AVR-789 Receiver provides quality HD pictures from conventional sources like cable satellite and DVD. Its Dolby TrueHD and DTS-HD Master Audio decoding features offer ultimate audio experience over video. With the Audyssey Dynamic Volume an automatic volume-leveling technology and Audyssey Dynamic EQ technology the Denon AVR-789 AV Receiver optimizes the surround sound performance. A host of video inputs and outputs allows you to easily connect a wide range of peripherals.

starting at

$420
13%off
 
store rating:
  • product
home theater receiver 120 watts x 7 ,Dolby TrueHD and DTS-HD(tm) Master Audio decoding plus Dolby Pro Logic IIz,PC networking and built-in HD Radio tuner
 

starting at

$285
  • product
Featuring a high-precision 32-bit floating point DSP processor and DTS suite the Denon AVR-689 AV Receiver with 80 Wattschannel power output is perfect for amazing surround sound experience. With Audyssey’s automatic volume leveling system and dynamic EQ functionality this receiver offers smooth bass and tonal balance even at very low volume levels. Featuring equal power in all 7 channels the Denon AVR-689 receiver allows you to connect up to 7 speakers independently. Designed with 3 HDMI v1.3a inputs 3 component inputs 4 composite inputs and 3 S-Video inputs the Denon AVR-689 Home Theater Receiver ensures enhanced peripheral connectivity. Available in black the AVR-689 Receiver measures 17.1 x 6.7 x 14.9 inches (W x H x D) and weighs 25.4 lbs.

starting at

$285
 
store rating:
  • product
Once again, Denon advances the state-of-the-art in home theater surround sound with the AVR-4810CI, with nine on-board amplifier channels each rated at a robust 140 watts. The multi-mono block amp construction ensures top audio fidelity, and the Free...
at
 
store rating:
  • product
Learn more about Magnolia Premium Installation This 735-watt helps you create a home entertainment system by providing 5 HDMI inputs, SIRIUS Satellite Radio readiness and support for a host of surround sound decoders.
at
 
store rating:
  • product
home theater receiver 130 watts x 7 ,Dolby TrueHD and DTS-HD(tm) Master Audio high-resolution surround decoding plus Dolby Pro Logic IIz and Audyssey DSX surround processing,PC networking and built-in HD Radio tuner
 
store rating:
  • product
home theater receiver 75 watts x 5,Dolby TrueHD and DTS-HD(tm) Master Audio high-resolution surround decoding,Audyssey MultEQ auto setup and calibration
 
store rating:
  • product
home theater receiver 140 watts x 9 ,Dolby TrueHD and DTS-HD(tm) Master Audio decoding plus Dolby Pro Logic IIz and Audyssey DSX processing,wireless PC networking and built-in HD Radio tuner
Best prices on Denon receiver watts in Receivers. Check out BizRate for great deals on Receivers from Denon. Use BizRate's latest online shopping features to compare prices for Denon receiver watts. Read product specifications, calculate tax and shipping charges, sort your results, and buy Electronics with confidence. Easily narrow your search and find the product that's perfect for you: Denon AVR1600 5.1 CH Home Theater Receiver - Denon AVR-589 5.1 Channel Home Theater Receiver.