Apc cooling system System Cooling

Description:

InRow RC Chilled Water COOLING SYSTEM 100-120V 50/60 Hz NEMA

Description:

200-240 Volts - 50 / 60 Hz

Description:

200-240 Volts - 50 / 60 Hz

Description:

460-480 Volts - 60 Hz

Description:

460-480 Volts - 60Hz

Description:

InRow RC Chilled Water COOLING SYSTEM 100-120V 50/60 Hz NEMA

Description:

APC Hot-Air Recirculation Prevention Kit consists of plastic covers and foam tape to maintain proper airflow if the front vertical mounting flanges are moved toward the rear of the enclosure.

Description:

Sold Individually

Description:

The APC Rack Fan Tray is a low cost solution that aids in heat removal from a Netshelter Enclosure. The system easily installs into the top of the enclosure and expels heat from the roof of the rack. The fan tray promotes bottom to top airflow for an enclosure in zero U of space. Cools by exhausting heat out of the roof of the rackThis Roof Fan Tray is designed for 120 VAC devices.r to entire facilities. Its comprehensive solutions, which are designed for both home and corporate environments, improve the manageability, availability and performance of sensitive electronic, network, communication and industrial equipment of all sizes.This Roof Fan Tray is designed for 120 VAC devices.

Description:

Airflow: 440 CFM

Description:

Airflow: 440 CFM

Description:

The APC Rack Fan Tray is a low cost solution that aids in heat removal from a Netshelter Enclosure. The system easily installs into the top of the enclosure and expels heat from the roof of the rack. The ACF504 fan tray promotes bottom to top airflow for a Netshelter SX enclosure in zero U of space. Cools by exhausting heat out of the roof of the rack.This product is designed for Netshelter SX 750 mm.

Description:

For: 23.62 in NetShelter Enclosures - 100-240 Volts 50 / 60 Hz

Description:

APC - Portable A/C 7500 BTU

Description:

The APC Rack Fan Tray can be installed in the roof, base, or both for increased ventilation within the NetShelter WX Wall-Mount enclosure. Each tray takes up 1U of equipment mounting space. The unit ships with two fans providing a total of 220 CFM airflow.The product includes Installation Guide, Qty 1 - IEC to NEMA 5-15P Power Cord. wall-mount enclosure mounts directly to building walls without occupying valuable or unavailable floor space. Rubber feet are provided with the enclosure for those applications that require floor mounting.The product includes Installation Guide, Qty 1 - IEC to NEMA 5-15P Power Cord.

Description:

This filter removes dust and other particles from the air before being delivered to the inlet of the rack mounted IT equipment.

Description:

The NetworkAIR RM Air Distribution Unit is a unique 2U rack-mounted fan tray product that works with an existing precision A/C system to deliver cool air to the equipment contained in a NetShelter enclosure or other 19" EIA-310-D rack with an open or removable floor. The Air Distribution Unit, which is installed at the bottom of the enclosure and can be connected to the raised floor plenum, pulls supply air directly into the enclosure, thereby preventing the conditioned air from mixing with warm ambient air before it reaches the equipment. The dual fans provide the increased airflow needed to cool densely packed equipment and improves static pressure distribution under raised floors, solving many of the heat issues facing today's data centers.

Description:

240 Volt

Description:

Portable - Air Filtration

Description:

Closet Ventilation Unit - Wall or Ceiling Mounted

Description:

Housing equipment with side-to-side airflow creates many challenges for IT and facility managers, particularly in regards to cooling. Because most enclosures are designed for a front to back airflow pattern, it is difficult to maintain ideal operating temperatures on side-to-side airflow equipment. The Rack Side Air Distribution Unit allows for greater security and organization by allowing racks to be placed adjacent to one another without impeding airflow.The Rack Side Air Distribution Unit is a 2U rack mountable air distribution product for networking equipment or servers with side-to-side airflow. It pulls in conditioned air from the front of the rack and distributes it to the side air intake of the networking equipment. This extends equipment life by providing proper inlet temperatures.This product is recommended for one or more networking products that are stacked consecutively in a rack. Rack Side Air Distribution Units may be placed above and/or below the networking equipment. Airflow pattern is user configurable via an interchangeable air turning vane.

Description:

The AR8207BLK fan tray can be installed in the roof, base, or both for increased ventilation within the NetShelter WX Wall-Mounted Enclosure. Each tray takes up 1U of equipment mounting space. The unit ships with two fans providing a total of 220 cfm airflow.

Description:

Length: 9.10 - Width: 6.40 - Weight: 1.75 lbs

Description:

100 Ft - Flexible

Description:

InRow RC to InRow RC W / HDW

Description:

100 Ft - Flexible

Description:

Length: 14.50 - Width: 15.00 - Weight: 23.00 lbs.

Description:

8.8 MBH / 1F TD 200-240V / 3 / 6 - Depth: 1154.00 mm - Height: 1248.00 mm - 2200 Watts

Description:

Netshelter Sx Roof Fan Tray 115 Vac The ACF501 promotes bottom to top airflow for an enclosure in zero U of space It cools by exhausting heat out of the roof of the rack It has roof fan tray 115 VAC for Netshelter SX It facilitates overhead cable...

Description:

Self-contained rack enclosures with up to 18kW cooling capacity for high-density server deployments in space-constrained and/or uncontrolled environments.