Trijicon M16 / Ar15 Top Of Handle Mount

Ar15/M16 Qd Sling Adapter & Swivel - Qd Sling Swivel

Low-profile ambidextrous mount replaces the factory receiver end plate to allow easy attachment of a QD sling swivel to the rear of the receiver. Won't interfere with access to weapon's controls, and won't snag on foliage, vehicle, or other gear. Made...

Brownells

Ar-15/M16 Carry Handle Mount - Carry Handle Mount, Black

Clamps to the carry handle of an A2-style rifle to allow installation of a scope, holographic red dot sight, or other optic that requires Picatinny receiver rail mounts. Removes easily with the optic still attached, so you can quickly switch back to A2...

Brownells

Ar-15/M16 Aimpoint Micro Mount - Aimpoint Micro Mount

Streamlined, minimal-profile mount clamps to flattop receiver rail and provides secure, correct-height attachment for Aimpoint Micro H-1, R-1, and T-1 red dot optics on flattop AR-15/M16 receivers. Positions optic for co-witnessing with factory iron...

Brownells

Trijicon ACOG 4x32 Scope with Red Horseshoe/Dot Reticle and M4 BDC with TA51 Mount TA31H

Trijicon ACOG 4x32 Scope with Red Horseshoe/Dot Reticle and M4 BDC with TA51 Mount TA31H: 4x32 Trijicon acog — dual illuminated red horseshoe reticle, bac and flattop mount acog 4x32 scope with red horseshoe bac reticle includes flattop adapter-...

Wayfair

Ar-15/M16 Rapid Transition Sights - Rapid Transition Sights

Machined aluminum backup sights mount at a 45 offset angle to enable instant transition from primary optic simply by tilting the rifle. Rear sight mounts on receiver rail, front sight on handguard top rail. Can be installed on the left or right side of...

Brownells

Ar-15/M16 45 Degree Offset Adapter - 45 Degree Offset Adapter

FEATURES: True quick detachable 45 degree rail offset adapter For any picatinny accessory Allows for a 1:30 or 10:30 mount when using the top rail on a handguard Black finish Aluminum construction BENEFITS: Allows for small red-dots to be mounted at a...

Brownells

Ar-15/M16 Scope Mount - Mgw Ar-15/M16 Scope Mount

Easy-to-install, securely locks into the top of the carry handle with a single, thumb screw. Ultra- rigid, closed-top design will not crush or deform under pressure from rings. Accepts all Weaver-style rings. Does not obscure the factory sights. Mfg:...

Brownells

Ar-15/M16 Z-360 Gen 2 Sling Mount - Z-360 Gen 2 Sling Mount, Black

Polymer adapter adds an ambidextrous mounting point for a pushbutton QD sling at the back of the receiver on collapsible-stock rifles. Low profile design won't interfere with working the charging handle. Interlocking clamps offer secure fit on all...

Brownells

Ar-Pepr Qd Scope Mount W/ Picatinny Tops - Ar-Pepr Qd Scope Mount 30mm

New locking QD design for quick attachment Return-to-zero reliability Provides 2" of forward eye positioning Ideal for m4 & AR15 flat top platforms Picatinny & smooth ring tops Proper eye position ready Mfg: Burris

Brownells

Ar-15/M16 Single Rail (Sr) Mount System - Sr Carry Handle Mount

Picatinny rail designs increase your scope and accessory mounting options without gunsmithing or permanent alterations. Single Rail (SR) keeps weight to a minimum. Made from tough, extruded aluminum; attaches securely with easy-to-turn, steel...

Brownells

Ar-15/M16 Bolt Carrier Carbon Scraper - Bolt Carrier Carbon Scraper

Durable, tool steel scraper removes carbon buildup in AR15/M16 bolt carriers quickly and easily. Insert a section of your cleaning rod into the 7/32'''' hole to act as a T-Handle and turn; dual scraping edges clean in both directions. Compact design is...

Brownells

Ar-15/M16 Flattop Scope Mount - Flattop Scope Mount, 1''''

One-piece mount provides strong, secure scope attachment that withstands the bumps and knocks of hard tactical use. Positions scope well above flattop receiver for easy heads-up aiming. Each ring is 11/8" long for maximum contact with scope body, and...

Brownells

Ar-Pepr Qd Scope Mount W/ Picatinny Tops - Ar-Pepr Qd Scope Mount 1''''

New locking QD design for quick attachment Return-to-zero reliability Provides 2" of forward eye positioning Ideal for m4 & AR15 flat top platforms Picatinny & smooth ring tops Proper eye position ready Mfg: Burris

Brownells

Ar-15/M16/Ar-Style .308 Modular Flattop Riser Mount System - Mfrms Mount Rail Base

Modular riser mount clamps to a flattop Picatinny receiver, so you can mount a scope at correct eye level for maximum accuracy. The separate base has two, oversized, easy-grip thumbscrews and full-contact clamping along entire length of base to provide...

Brownells

Ar-15/M16 Xti Xpress Threat Interdiction Sights - Ar Xpress Threat Interdiction Sights

Features: XTI (Xpress Threat Interdiction) AR15 angle mount sights XS Express Standard Dot Tritium front White Stripe XS Rear Sight Aluminum construction with a matte black finish Intended to be mounted on the 12 o'clock rail Includes Sight Adjustment...

Brownells

Ar-15/M16 Brass-Savr Brass Catcher - Carry Handle Brass-Savr

Cotton-poly bag, supported by steel frame. Holds 70 rounds of .223 brass; easy-open bottom unloads fast. Separate models to fit carry handle and flattop AR-style rifles. Mfg: 3 Bucc Inc. SPECS: Cotton-poly cloth bag, steel frame, polymer mount, black,...

Brownells

AR Standard Carry Handle Tri Scope Rail by Barska

AR Standard Carry Handle Tri Scope Rail, Raises mounting platform by .78” and features three picatinny rails. Rail top is 5.31” inches long and an additional rail on either side of the mount. Peep sight design allows you to use hunting’s iron sight.

Shop Barska