Dish antenna in TV Antennas

Description:

Installs easily on 18inch x 20-24inch multi-satellite dishes Picks up VHF, UHF and HD local programming to complement satellite programming Features an internal amplifier that minimizes signal loss The TV44 can clip directly on to your existing...

Description:

Receives all available UHF/VHF local HDTV broadcasts CEA Antenna Locator Code: Blue Highly directional UHF elements reduces signal interference High average return loss for better reception and performance Amplification improves picture quality High...

Description:

Take advantage of all the viewing options around you.

Description:

A compact, amplified, highly directional VHF/UHF antenna utilizing the a long periodic UHF element with VHF rear reflector element.Includes HDTVo antenna, Power injector, Mini-mast mounting bracket,All associated mounting screws.

Description:

Model DS2076 76cm Dish Antenna. Reflectors are manufactured from galvanized steel, finished with a seven step, textured, thermoset powder coat. A hydrophobic agent added the the finish increases water and snow repellent action. Mounts are manufactured fro

Description:

Use this compact outdoor HDTV antenna to receive more local high-definition programming in full HDTV resolution. terk outdoor antenna,outdoor hdtv antennas,high definition tv antennas,hdtv antennas,hd antenna best buy,best buy hd antenna

Description:

Permanently mount an antenna or satellite dish on the peak of a roof, or almost anywhere!

Description:

Permanently mount an antenna or satellite dish on the peak of a roof, or almost anywhere!

Description:

Here';s an easy way to mount an outdoor antenna on the roof or the side of the house! You can install the mount foot on either end! If you need the dish up higher than the standard 18"" pole will allow, this pipe is the perfect solution. Simply...

Description:

Permanently mount an antenna or satellite dish on the peak of a roof, or almost anywhere!

Description:

This Non-penetrating Roof Mount Base allows you to install dish antennas on flat roofs where no holes can be drilled. The heavy steel base is 34-3/4"" square. Purchase the base, then choose the Antenna Masts you need!

Description:

5-ft Galvanized Antenna Mast 1.66in O.D. Fits DIRECTV and DISH 500

Description:

Mast is suitable for StarBand and DirecWay.

Description:

This 2” Mast is suitable for Super DISH.

Description:

This 1-5/8” Mast is suitable for DIRECTV & DISH 500.

Description:

With this handy bracket you can mount an antenna to the side of a house without damaging the vinyl siding! It?s designed to provide a flat, stable surface when attaching the dish mount to a vinyl-sided home.

Description:

For long cable runs between the satellite dish and the receiver, this amplifier will boost the signal a full 20dB. Compensates for line loss. (Note: unit is not waterproof and should be mounted in a waterproof enclosure if placed outdoors.)

Description:

This UL-Listed High-Frequency ground block has one F81 connector installed and one ground screw lug. It';s rated 3.0 GHz, which is recommended for DISH Network & DISH Pro. It is primarily used to ground coaxial cable from antenna, cable, or satellite to a

Description:

This UL-Listed High Frequency ground block has four F81 connectors installed and four ground screw lugs. It';s rated 3.0 GHz, which is recommended for DISH Network & DISH Pro. It is primarily used to ground coaxial cable from antenna, cable, or...

Description:

Model 274490 Mini-Clamp Bracket Mount Antenna to Dish

Description:

Use this mount to add an off-air antenna to the satellite dish in a snap! It works great on either pitched or flat roofs, or on the side of the building. Fits most satellite dish mounts. Clamp bracket fits inside clamp bracket of satellite dish mount.

Description:

Here';s an easy way to mount an outdoor antenna on the roof or the side of the house! You can install the mount foot on either end!

Description:

Here';s a really simple way use an existing pole to install a satellite dish!This Quick Pipe Adapter is 8 inches long and has a diameter of 1.66 inches. Just slide the lip over the edge of the existing pipe & wires, tighten the bolts, and mount your...

Description:

An eave mount is a great solution when you can';t attach a dish on a roof. But many of the newer dishes have a foot that is too large for the fascia. This handy metal mount attaches to the board that extends from the house to the back of the eave,...

Description:

Durable steel kit mounts DBS Satellite Dish to almost any single size chimney!

Description:

Model SB-8UL Split bolt is UL-listed and Dish Approved.

Description:

Manufacturer Part # SC13B1 UL listed, Dish approved

Description:

Manufacturer Part # SC07GG UL listed, Dish Approved. This ""I"" Beam grounding clamp is used to bond a solid or stranded copper wire (up to #10awg) to a steel structure.

Description:

This UL listed, Dish approved front meter pan connector is designed to provide a bonding connection between the metallic frame of a meter pan and a copper ground wire. Its unique design allows a fixed and positive mechanical contact without interfering wi

Description:

This UL listed, Dish approved corner meter pan connector is designed to provide a bonding connection between the metallic frame of a meter pan and a copper ground wire. Its unique design allows a fixed and positive mechanical contact without interfering w