Electrical Supplies › aibecy 42 stepper motor 2

Walmeck Stepper Motor 42mm With17 Motor Drive 0.4n.m 42mm With Nema 17 Motor 2 Phase 1.8 WithCable Motor Drive 2 Phase 1.8 0.9a 5pcs Nema 17 0.9a 0.4n.m 42mm Drive 2 Phase 1.8 0.9a 0.4n.m

5pcs Nema 17 Stepper Stepping Motor Drive Control 2 Phase 1.8 Degree 0.9A 0.4N.M 42mm with Lead Cable 3D Printer/CNC Accessory Replacement The popular Nema 17 stepper motor features 1.8 degree step angle 2 phase allowing for a holding torque of 0.4N.M.... more

DAYTON 5K600BA Tool Motor,2-Shaft,1/3hp,3450rpm,115V

Power Tool Motor, Single Phase, Motor Design Split-Phase, 1/3 HP, Nameplate RPM 3,450, No. of Speeds 1, 115V AC Voltage, Full Load Amps 4.2, 48 Frame, Usable @ 208V No, Usable @ 200V No, 60 Hz, Motor Service Factor 1, Motor Thermal Protection None,... more

DAYTON 52JE23 AC Gearmotor, 4.2 in-lb Max. Torque, 41 RPM Nameplate RPM, 230V

AC Gearmotor, Number of Output Shafts 1, Motor Type Shaded Pole, Motor Enclosure Open Air-Over, Nameplate Speed 41 RPM, Maximum Torque 4.2 in-lb, Overhung Load Capacity 30 ft-lb, Rotation CW, Output Shaft Height 0.92 in, Mounting Orientation Any Angle,... more

DAYTON 52JE28 AC Gearmotor, 4.2 in-lb Max. Torque, 50 RPM Nameplate RPM, 115V

AC Gearmotor, Number of Output Shafts 1, Motor Type Shaded Pole, Motor Enclosure Open Air-Over, Nameplate Speed 50 RPM, Maximum Torque 4.2 in-lb, Overhung Load Capacity 30 ft-lb, Rotation CW, Output Shaft Height 0.92 in, Mounting Orientation Any Angle,... more

Stepper Motor, 2 Phase 1.5A 1.8 Degree, Extruder Motor with 31 Inch Cable - Black, Silver Tone

Size Rated Current: 1.5 A; Number of Phase: 2; Step Angle: 1.8 degree; Holding Torque: 48N.cm; Phase Resistance: 10 ohm; Phase Inductance: 20mH; Rotor Inertia: 68 g.cm²; Shaft Size: 20mm x 5mm/0.78 inch x 0.2 inch(L*D); D-cut Length: 18mm/0.71 inch; Size… more

Universal Fixing Mounting Base Multifunction Motor Mount Bracket For Motor 775/895/ Stepper Motor 28/35/42/ Nema 17

Faster shipping. Better service more

Stepper Motor Driver Hybrid Stepper Motor Driver Two-Phase CNC Controller 0.2-5A TB6600 DC12-48V Input

Specification:Item Type: Input Voltage: DC 12-48V Input Input: 1-5A Current Select Drive Stepper Motor Output Current: 0.2A-5A Temperature Operating Temperature: -10-45℃; Storage Temperature -40℃ -70℃ Humidity: No Condensation No Drop Gas... more

2024 2 Phase 4 Wire Stepper Driver 2 in 1 Bipolar Stepper Motor Drivers Photoelectric Isolation

1�2 Part Composition: Composed of 2 parts driver and wiring. 2 general 2 phase stepper drivers are integrated in one driver shell reduces the volume keeps the functional characteristics unchanged and saves space and wiring 2�Photoelectric... more

2 Phase 4 Wire Stepper Driver 2 in 1 Bipolar Stepper Motor Drivers Photoelectric Isolation HLF

1�2 Part Composition: Composed of 2 parts driver and wiring. 2 general 2 phase stepper drivers are integrated in one driver shell reduces the volume keeps the functional characteristics unchanged and saves space and wiring 2�Photoelectric... more

2 Phase 4 Wire Stepper Driver 2 in 1 Bipolar Stepper Motor Drivers Photoelectric Isolation

1�2 Part Composition: Composed of 2 parts driver and wiring. 2 general 2 phase stepper drivers are integrated in one driver shell reduces the volume keeps the functional characteristics unchanged and saves space and wiring 2�Photoelectric... more

Uadme 2 Phase 4 Wire Stepper Driver 2 in 1 Bipolar Stepper Motor Drivers Photoelectric Isolation keeps the functional characteristics unchanged

Specification: Item Type: 2 Phase 4 Wire Stepper Driver Model: SMD-2A24-M32D-AV10 Material: ABS Specification: 2 Phase 4 Wire Bipolar Type Speed Response Rate: 100KHz Operating Temperature: 0-50℃ Operating Humidity: 40-90%RH Input Voltage: DC10V-26V... more

TICFOX 2 Phase 4 Wire Stepper Driver 2 in 1 Bipolar Stepper Motor Drivers Photoelectric Isolation

Specification: Item Type: 2 Phase 4 Wire Stepper Driver Model: SMD-2A24-M32D-AV10 Material: ABS Specification: 2 Phase 4 Wire Bipolar Type Speed Response Rate: 100KH Operating Temperature: 0-50℃ Operating Humidity: 40-90%RH Input Voltage: DC10V-26V... more

1.5A 42 Stepper DC Motor 2-Phase 4-Line Industrial Parts for BACHIN Laser Printer Accessories

Item Type: Motor Voltage: DC 12-36V Rated Current: 1.5A / Phase Step Angle: 1.8 ° Step Accuracy: 1.8 ° ±% For Torque: 3.8mN.m Outlet Way: 2-phase 4-line more

1.5A 42 Stepper DC Motor 2-Phase 4-Line Industrial Parts for BACHIN Laser Printer Accessories

1�Work as one of high precision accessories such stepper motor is easy to use in practicality. 2�As a two-phase motor the DC motor is equipped with 1.8 ° step angle and 3.8mN.m for torque. 3�In the 2-phase 4-wire type of outlet way and there is... more

Electric Motor 2?Phase 42 Stepper 1.8 Degree 0.28Nm Stepping Driver NEMA17 Replacement

Item Type: Electric Motor Material: Carbon steel Purpose: Industrial motor control transmission and transmission occasion Step Angle: 1.8° Voltage: Determined by the equipped driver no fixed voltage Current: 1.5A Holding Torsion: 0.28N.m Resistance:... more

2 Phase 4 Wire Stepper Driver 2 in 1 Bipolar Stepper Motor Drivers Photoelectric Isolation

1�2 Part Composition: Composed of 2 parts driver and wiring. 2 general 2 phase stepper drivers are integrated in one driver shell reduces the volume keeps the functional characteristics unchanged and saves space and wiring 2�Photoelectric... more

2 Phase 4 Wire Stepper Driver 2 in 1 Bipolar Stepper Motor Drivers Photoelectric Isolation Industrial supplies

1.2 Part Composition: Composed of 2 parts driver and wiring. 2 general 2 phase stepper drivers are integrated in one driver shell reduces the volume keeps the functional characteristics unchanged and saves space and wiring 2.Photoelectric Isolation: 2... more

1.5A 42 Stepper DC Motor 2-Phase 4-Line Industrial Parts for BACHIN Laser Printer Accessories

Item Type: Motor Voltage: DC 12-36V Rated Current: 1.5A / Phase Step Angle: 1.8 ° Step Accuracy: 1.8 ° ±% For Torque: 3.8mN.m Outlet Way: 2-phase 4-line 1 x Motor 1 x Data Cable more

1.5A 42 Stepper DC Motor 2-Phase 4-Line Industrial Parts for BACHIN Laser Printer Accessories

1�Work as one of high precision accessories such stepper motor is easy to use in practicality. 2�As a two-phase motor the DC motor is equipped with 1.8 ° step angle and 3.8mN.m for torque. 3�In the 2-phase 4-wire type of outlet way and there is... more

Electric Motor 2?Phase 42 Stepper 1.8 Degree 0.28Nm Stepping Driver NEMA17 Replacement

1�Imported high?quality motor steel sheets bearings made of German technology low self?inductance good responsiveness. 2�The product can be directly connected to the load and run at low speed in a state of close to a locked rotor without gear... more

Electric Motor 2?Phase 42 Stepper 1.8 Degree 0.28Nm Stepping Driver NEMA17 Replacement

Item Type: Electric Motor Material: Carbon steel Purpose: Industrial motor control transmission and transmission occasion Step Angle: 1.8° Voltage: Determined by the equipped driver no fixed voltage Current: 1.5A Holding Torsion: 0.28N.m Resistance:... more

Stepper Motor Driver Board Module High Accuracy for 2 Phase 42 57 Stepping Servo CNC Controller 5.5A DC24~36V

1�VARIOUS PROTECTION: Stepper motor driver has over current over voltage under voltage phase error encoder error position error protection 2�HIGH ACCURACY: Two phase stepper driver is stable durable efficient and accurate you can use with... more

2024 1.5A 42 Stepper DC Motor 2-Phase 4-Line Industrial Parts for BACHIN Laser Printer Accessories

1�Work as one of high precision accessories such stepper motor is easy to use in practicality. 2�As a two-phase motor the DC motor is equipped with 1.8 ° step angle and 3.8mN.m for torque. 3�In the 2-phase 4-wire type of outlet way and there is... more

Electric Motor 2?Phase 42 Stepper 1.8 Degree 0.28Nm Stepping Driver NEMA17 Replacement

Item Type: Electric Motor Material: Carbon steel Purpose: Industrial motor control transmission and transmission occasion Step Angle: 1.8° Voltage: Determined by the equipped driver no fixed voltage Current: 1.5A Holding Torsion: 0.28N.m Resistance:... more

Electric Motor 2?Phase 42 Stepper 1.8 Degree 0.28Nm Stepping Driver NEMA17 Replacement

1�Imported high?quality motor steel sheets bearings made of German technology low self?inductance good responsiveness. 2�The product can be directly connected to the load and run at low speed in a state of close to a locked rotor without gear... more

YHRY Nema17 Stepper Motor Bipolar 42 Motor 4-Lead Wire with 1m Cable1m Cable Connector Compatible with 3D Printer (1Pack 23mm)

Reliable and Stable Performance Strictly guarantees the quality of stepper motors and minimizes the rate of defective ones which ensure that customers can get the most reliable and stable stepper motors. Uniform rotation speed no step loss: we build... more

Step Motor-24V/1.5A Nema 17 2 Phase Stepper Motor 0.4 NM 1.8° Industrial Control Stepping Motor

Specification: Model: FY42EM150A Certification: CE certification Voltage: 24v Current: 1.5A Rated speed: 600 rpm Rated torque: 0.4 NM Step angle: 1.8° Efficiency: 80% Resistance accuracy: +-10% (20 ° C) Temperature rise: 80 ° Cmax Insulation... more

WINDLAND Stepper Motor Driver DM542 20-50V for DC 1.0-4.2A 2-phase CNC Digital Microstep Controller for Nema17 Nema23 Stepper Mot

The driver uses discrete components structure as long as no over voltage and wiring is right please rest assured that two-phase 4-wire 6-wire 8-wire can be used. 57 series 4.5A or less (including 4.5A) two-phase four-wire six-wire eight-wire stepper... more

10Pcs Dual H-Bridge DC Stepper 1.5A 2 Way DC Motor Driver Module Replace Stepper L298N for Smart Car

Product parameters: The module supply voltage 2V-10V. Signal input voltage 1.8-7V. Single Operating current 1.5A current up to 2.5A low standby current (less than 10uA). Built-in common conduction circuit when the input pin is left floating the motor... more

Stepper Motor Driver Digital Display Micro Control 4 Digit LED Tube Stepper Motor Controller DC 18?80V Industrial supplies

1.STABLE PERFORMANCE: The driver adopts 32 bit ARM chip with built in smoothing filtering function so the external input can operate normally even without acceleration and deceleration. 2.COST SAVING: The drive has a built in microcontroller and point... more

Stepper Motor 28x45 DC 2.1V 1.5A 2 Phases Quick Response Stable Output Large Torsion Low Noise Stepping Motor Industrial supplies

1.Quick Response: Frequent start quick response quick stop good control performance start stop and flip are completed in a few pulses when running within a certain frequency range no movement mode will lose a step. 2.Running Smoothly: It runs smoothly... more

42 Stepper Motor Drive Set Electronic Component Module 0.4N.M 17HS4401S+TB6600 4A

Specification: Item Type: 42 Stepper Motor Drive SetNumber of Phases: 2 Rated Voltage: DC3.6V Phase Resistance (20℃): 2.4 x (1±15%) π/phase Keep Torsion: ≥420mN. m Steering (looking at Shaft Extension): A-AB-B-CW Maximum No-Load Operating... more

5 Sets Stepper Motor Driver Ultra Silent Stepstick 2.5A Uart Nema17 Step Motor Driver Module for TMC2208

1�Ultra Quiet: This module allows noiseless high accuracy chopping algorithms for silent motor movement and silent standstill making it super quiet during the printing process. 2�Powerful: This stepper motor driver module has better heat... more

DEWin Stepper Gear Motor 2 Phase 4 Wire High Torsion Heat Resistant Electric Geared Motor for Packaging DC3.3V

Specification: Item Type: Stepper Gear Motor Material: Aluminum alloy brass silicon steel Step Angle: 1.8°±5% Phase Resistance: 1.1Ω±0.1 (at 20℃) Number of Phase: 2 phases Phase Inductance: 3.5mH±20% (1kHz 1V RMS) Holding Torsion: 11kg.cm min.... more

Stepper Gear Motor 2 Phase 4 Wire High Torsion Heat Resistant Electric Geared Motor for Packaging DC3.3V

1�ADJUSTABLE SPEED: The reducer motor with gear box can be matched with speed governor and there are various speeds to choose from. 2�BRASS COIL: The brass coil inside the stepper motor can withstand 150℃ high temperature with uniform arrangement... more

Step Motor Driver 2 Phase Motor Driver PWM Controller Adjustable with Shell DM860H for 57 86 Stepper

Specification: Item Type: Step Motor Driver Material: Aluminium Alloy Model: DM860H Colour: Black Supply Voltage: DC12-36V or AC12-24V Driving Current: 0.3-2.0A Subdivision Accuracy: 1-128 Subdivision Options Input: Optically Isolated Signal Input... more

Uadme Stepper Gear Motor 2 Phase 4 Wire High Torsion Heat Resistant Electric Geared Low Speed Motor for Packaging DC3.3V

Specification: Item Type: Stepper Gear Motor Material: Aluminum alloy brass silicon steel Step Angle: 1.8°±5% Phase Resistance: 1.1Ω±0.1 (at 20℃) Number of Phase: 2 phases Phase Inductance: 3.5mH±20% (1kHz 1V RMS) Holding Torsion: 11kg.cm min.... more

ZPAQI Mini Stepper Motor Driver 2-phase 4-wire Stepping Motor Control Module Board

brand new and high quality Features: Made of high quality electronic components it is solid durable and good performance long service life. This driver board can drive 2-phase 4 wire/4-phase 5 wire stepper motors. It features 4 working modes: Normal... more