Home Hardware › hillman 8 18 x 1

Hillman 1/8 in. D X 1/8 X-Short in. L Metal Round Head Drive Wall Anchors 100 pk

Hillman 370030 118DXS Drive Wall Anchors are designed for various applications. These anchors are made from high-quality materials to ensure durability and reliability. The anchor features a size of 1/8DXS and a grip range of 1/8 to 1/4 . With a body... more

Hillman 1/8 in. D X 1/8 X-Short in. L Metal Round Head Drive Wall Anchors 2 pk

Primarily used in drywall the Drive Wall Anchor is a medium duty fastener for use in drywall plaster and tile. The tip has a drive point to pierce drywall easily; no pre-drilling is required. The two prongs on the head of the shell prevent the anchor... more

Hillman 1/8 in. Dia. x 1/8 LS Multi-Grip Range in. L Steel Round Head Drive Wall Anchors 2 pk

2 Pack 1/8 Long Drive Wall Anchor Grip Range 5/8 To 7/8 Clam Shell Pack . more

Hillman 41332 Drive Wall Anchors 1/8 D X 1/8 LS Multi-Grip Range in. L Metal Pan Head

Primarily used in drywall the hollow wall anchor is a medium duty fastener. Once the body of the anchor is installed the screw can be removed and items can be changed without disrupting the anchor. The tip has a drive point to pierce drywall easily.... more

Hillman 1/8 in. D X 1/8 LS Multi-Grip Range in. L Steel Round Head Drive Wall Anchors 2 pk

Primarily used in drywall the Drive Wall Anchor is a medium duty fastener for use in drywall plaster and tile. The tip has a drive point to pierce drywall easily; no pre-drilling is required. The two prongs on the head of the shell prevent the anchor... more

Hillman 1/8 in. D X 1/8 Short in. L Stainless Steel Pan Head Hollow Wall Anchors 100 pk

Hollow wall anchors also known as molly bolts are used with drywall. Use to securely fasten mirrors pictures cabinets and more to hollow walls. This anchor is an expandable sleeve that slides into pre-drilled hole in the wall. Once the anchor is... more

Hillman 370006 Plastic Pan Head Hollow Wall Anchor 1/8 Dia. x 1/8 Long L in.

Hollow wall anchors also known as molly bolts are used with drywall. Use to securely fasten mirrors pictures cabinets and more to hollow walls. This anchor is an expandable sleeve that slides into pre-drilled hole in the wall. Once the anchor is... more

Hillman 41330 Drive Wall Anchors 1/8 D X 1/8 Short in. L Metal Pan Head

Primarily used in drywall the Drive Wall Anchor is a medium duty fastener for use in drywall plaster and tile. The tip has a drive point to pierce drywall easily; no pre-drilling is required. The two prongs on the head of the shell prevent the anchor... more

Hillman 1/8 in. D X 1/8 Short in. L Metal Pan Head Hollow Wall Anchors 20 pk

Hollow wall anchors also known as molly bolts are used with drywall. Use to securely fasten mirrors pictures cabinets and more to hollow walls. This anchor is an expandable sleeve that slides into pre-drilled hole in the wall. Once the anchor is... more

Hillman 881109 1/8 in. x 1-1/2 in. Steel Cotter Pin 2-Pack

Product Details The Hillman 1/8 in. x 1-1/2 in. Steel Cotter Pin is used to secure two items together with the use of a common hole. Place the cotter pin in the hole. The bulbous head stops the pin from moving all the way through. To secure in place... more

Hillman 1/8 in. D X 1 1/2 in. L Metal Round Head Hollow Wall Anchors 2 pk

Hollow wall anchors also known as molly bolts are used with drywall. Use to securely fasten mirrors pictures cabinets and more to hollow walls. This anchor is an expandable sleeve that slides into pre-drilled hole in the wall. Once the anchor is... more

The Hillman Group 290001 1/8X3/4 Zinc Fender Washers 1/8 x 3/4 100 Count(Pack of 1)

The Hillman Group 290001 1/8X3/4 Zinc Fender Washers 1/8 x 3/4 100 Count(Pack of 1) Product Description A fender washer is a flat washer with a thinner body and an increased outer diameter. They are chosen when a large outer diameter is required for an... more

Hillman 881410 Metallic Steel Tension Pins 2-Pack 1/8 in. x 1-1/2 in.

FEATURES: The Hillman Tension Pins are mechanical fasteners that connect and secure two (2) or more parts of a machine relative to each other. They have a body diameter larger than the whole diameter. Tension pins measure 1/8 in. in overall diameter... more

Hillman 1/8 in. Dia. x 1 1/2 in. L Metal Round Head Hollow Wall Anchors 2 pk

Hillman 1/8 in. Dia. x 1 1/2 in. L Metal Round Head Hollow Wall Anchors 2 pk 2 Pack 1/8 Short Hollow Wall Anchor Clam Shell Pack. • Medium Duty • Clam shell pack • Drill size: 1/4 Brand: Hillman Fasteners MPN: N/A Thank you for shopping at our... more

Hillman 9/16 in. -18 Fine Thread x 1-1/2 in. Grade 8 Zinc Hex Cap Screw 1 pack

Features MADE USING CLASS 8 STEEL: Appropriate for most general use (match with Class 8 washers and nuts) PARTIALLY THREADED SHANK: Allows for a stronger grip between objects and less shear movement CORROSION-RESISTANT FINISH: Yellow zinc combines... more

Hillman 881409 1/8 in. x 1-1/4 in. Tension Pins 2-Pack

Product Details The Hillman Tension Pins are mechanical fasteners that connect and secure two (2) or more parts of a machine relative to each other. They have a body diameter larger than the whole diameter. Tension pins measure 1/8 in. in overall... more

Hillman 1/8 In. x 5/8 In. Steel Zinc Plated Fender Washer (100 Ct.) 290000

This fender washer is a flat washer with a thinner body and an increased outer diameter offering greater surface bearing. They are chosen when a large outer diameter is required for an increased bearing surface and surface load reduction. Designed for... more

The Hillman Group Tubular Rivet (1/8 x 1/4 ) Nickel (Model: 1270)

The Hillman Group Tubular Rivet (1/8 x 1/4 ) Nickel (Model: 1270) - Parts are engineered specifically for fastening soft materials - Assortment includes Split and Tubular rivet designs - Included rivets come in 1/8 and 3/16 diameter variants - Parts... more

Hillman 18 Ga. x 5/8 in. L Brass-Plated Steel Escutcheon Pins 1 pk 1.5 oz.

Hillman 18 Ga. x 5/8 in. L Brass-Plated Steel Escutcheon Pins 1 pk 1.5 oz. more

Hillman 18 Ga. X 5/8 in. L Brass-Plated Steel Escutcheon Pins 1 pk 1.5 oz

Escutcheon pin is used for any project where small decorative nails are required. Features a smooth shank with a large half-round decorative head. They often have thicker shafts than typical wire nails and can be used in any project where small nails... more

Hillman 881110 1/8 in. x 1-3/4 in. Steel Zinc Extended Prong Cotter Pin

FEATURES: The Hillman 1/8 in. x 1-3/4 in. Steel Cotter Pin is used to secure two items together with the use of a common hole. Place the cotter pin in the hole. The bulbous head stops the pin from moving all the way through. To secure in place bend the... more

The Hillman Group 290001 1/8X3/4 Zinc Fender Washers 1/8 x 3/4 100 Pieces

A fender washer is a flat washer with a thinner body and an increased outer diameter. They are chosen when a large outer diameter is required for an increased bearing surface and surface load reduction. Designed for auto body repair fender washers are... more

Hillman 881408 Tension Pins Metallic Steel 2-Pack 1/8 in. x 1 in.

FEATURES: The Hillman Tension Pins are mechanical fasteners that connect and secure two (2) or more parts of a machine relative to each other. They have a body diameter larger than the whole diameter. Tension pins measure 1/8 in. in overall diameter... more

Hillman 881108 1/8 in. x 1 in. Steel Cotter Pin 2-Pack

Product Details The Hillman 1/8 in. x 1 in. Steel Cotter Pin is used to secure two items together with the use of a common hole. Place the cotter pin in the hole. The bulbous head stops the pin from moving all the way through. To secure in place bend... more

Hillman 47153 Phillips Drive Pan Head Self-Drilling Screws 8-18 x 1/2 1 Lb Each

Hillman Phillips Drive Pan Head Self Drilling Screws are designed for power driving wood or metal to metal without drilling a pilot hole. The Drill Point drills it s own hole taps mating threads and fastens firmly in one operation. Size: 8-18 x 1/2... more

Hillman Fasteners 560322 Self Drilling Screws Zinc Plated Steel Hex Head 8-18 x 1-1/2 Box 100

These self-drilling screws are used in wood fiberglass and metal and they possess a drill point enabling it to drill in its own hole in thin gauge steel. The sharp threads create their own mating thread when drilled into the material. No pre-drilled... more

Hillman 882801 5/8 x 1 x 18 Gauge Machine Bushings Zinc-Plated Steel 2-Pack

FEATURES: Ready for your next job you ll be happy you added these bushings to your tool kit. The Hillman Machine Bushings reduce wear between moving parts and prevent marring of finishes. Used to create gaps between fasteners gears pulleys or other... more

Hillman 1/8 in. D X 3 in. L Round Steel Toggle Bolt 2 pk

Toggle bolts come with spring-action wings and are intended for anchoring into hollow walls. The wing is designed to spread apart behind the base material upon installation for firm hold in hollow wall applications. The wing disperses the weight of the... more

Hillman 1/8 in. Dia. x 3 in. L Round Steel Toggle Bolt 2 pk

Toggle bolts come with spring-action wings and are intended for anchoring into hollow walls. The wing is designed to spread apart behind the base material upon installation for firm hold in hollow wall applications. The wing disperses the weight of the... more

Hillman Fasteners 560280 8-18 x 1.5 in. Pan Head Drill Screw- 100 Pack

Pan head phillips drill screwSpecifications Finish - Zinc 100 pack Size - 8-18 x 1.5 in. Dimension - 3 x 3 x 2 in. Item weight - 0.93 lbs.Features Pan head phillips drill screw Finish - Zinc 100 pack Size - 8-18 x 1.5 in. Dimension - 3 x 3 x 2 in. Item... more

The Hillman Group 5025 Toggle Bolts 1/8 X 4-Inch

Toggle bolts are anchors for use in hollow wall or hollow block. The wing spreads the force over a larger load bearing surface. Toggle bolts are single-use anchors. Toggle bolts are anchors for use in hollow wall or hollow block. The wing spreads the... more

Hillman Toggle Bolts 1/8 X 2 Round Head Slotted Zinc Plated Steel 50/Box

HILLMAN TOGGLE BOLT Size: 1/8 x 2 Head Style: Truss Head Drill Size: 7/16 Wall Thickness: 3/8 to 1-1/4 Base Material: Drywall hollow block plaster tile Holds Up to 1/2 Drywall: 50 lbs Holds Up to C-90 Block: 45 lbs Spring wing toggle bolt Slotted round... more

Hillman 1/8 in. Dia. x 3 in. L Round Steel Toggle Bolt 15 pk

Hillman 1/8 in. Dia. x 3 in. L Round Steel Toggle Bolt 15 pk more

Hillman 560276 No.8-18 x 1 in. Zinc Plated Pan Head Phillips Self Drilling Screws - Pack of 100

We are dedicated to give everyone the very best houseware products for all home needs with a focus on dependability our client satisfaction and great quality. We provide high-quality modern products to be enjoyed by many clients. Features Zinc Plated... more

Hillman Toggle Bolts 1/8 X 4 Round Head Slotted Zinc Plated Steel 50/Box

Spring wing. 50-piece. No. 370051: Thread Diameter: 3/16 Length: 2 Head Type: Round Pkg Qty: 50 No. 370054: Thread Diameter: 3/16 Length: 3 Head Type: Round Pkg Qty: 50 No. 370057: Thread Diameter: 3/16 Length: 4 Head Type: Round Pkg Qty: 50 No.... more

Hillman 560270 Phillips Self Drilling Screw 8-18 x 1/2 100 Pack Each

Phillips pan head zinc finish. Pack of 100. 8-18 x 1/2 Pan head Standard grade Self drilling screws 100 Pack Boxed. more

The Hillman Group 5024 Toggle Bolts 1/8 X 3-Inch

Toggle bolts are anchors for use in hollow wall or hollow block. The wing spreads the force over a larger load bearing surface. Toggle bolts are single-use anchors. Toggle bolts are anchors for use in hollow wall or hollow block. The wing spreads the... more

Hillman 1/8 in. D X 3 in. L Round Steel Toggle Bolt 15 pk

Toggle bolts come with spring-action wings and are intended for anchoring into hollow walls. The wing is designed to spread apart behind the base material upon installation for firm hold in hollow wall applications. The wing disperses the weight of the... more